How to adjust the new car mirror?

Everyone knows where the blind spots of vehicles are and how to avoid them to the greatest extent. Many novice driver friends may be at a loss. To solve this blind spot, we must first adjust and use the rearview mirror correctly.

First of all, look at how to adjust the rearview mirror: the role of the rearview mirror is to observe the situation on both sides of the car body and behind the car. My experience is that by adjusting the rearview mirror, you can observe the situation on both sides and the rear at the maximum angle.

Let me show you:

Step 1: Adjust the left and right rearview mirrors of the car so that the car body occupies a quarter of the inner side of the mirror, that is, the internal inclination angle, and the left and right rearview mirrors are the same;

Step 2: Adjust the rearview mirror on the outside of the car up and down. The left mirror is adjusted to the middle line of the far horizon above and below the mirror surface, that is, half above and half below;

The right mirror is adjusted to occupy one-third of the horizon and two-thirds of the floor (individual models can be adjusted to occupy one-quarter and three-quarters of the floor when reversing);

Step 3: Adjust the indoor rearview mirror: the indoor rearview mirror should be able to see the four corners of the rear windshield at the same time, that is, the four corners of the rearview mirror should be aligned with the four corners of the rear windshield.

This kind of rearview mirror adjustment is also an international standard rearview mirror adjustment method. Because everyone's height is different from the driver's seat, when a car is being driven by another driver, the seat and rearview mirror should be adjusted first.

Secondly, walk around the car before getting on the bus. What must you see when you walk around the car?

First look at the front, rear, left and right of the vehicle for obstacles;

The second is to see whether the tires and tire pressure are normal;

The third is to see if the vehicles are different;

The fourth is to plan the departure and turning routes.

By going around this circle, you can effectively avoid reversing accidents, which is why you are required to go around the car to get a driver's license. Unfortunately, many people forget this link after getting your driver's license. I think this habit needs to be formed.

Third, reversing must be slow. If it is an automatic vehicle reversing, the right foot must step on the brake to reverse, regardless of the throttle;

Manual transmission vehicles should idle and reverse in a semi-clutch state, and be ready to brake at any time. If oil supply is needed, it is also in a semi-clutch state. Lightly supply oil, and then prepare to brake.

The purpose of this is that if you don't observe well or if someone suddenly appears and you don't see it, even if you hit someone, you can push it gently without causing great harm and loss.

Fourth, the location of the blind spot behind the vehicle: from the inside rearview mirror,

There is an object about one meter high behind the car, which is not visible about three meters away from the rear bumper.

Only the upward probe has just seen a little;

5. How to avoid the left and right A-pillar blind areas when turning: Place road cones in the left front and right A-pillar blind areas of the vehicle, and be sure to slow down in advance when turning.

Observe the blind area of A-pillar by tilting the head back and forth and swinging the head left and right;

We look at the blind spot on the right or shake our heads left and right to observe.

Sixth, how to observe the obstacles in the blind area of the left and right B-pillars in the car,

Let's look at the location of the blind spot of the left B-pillar.

Look at the position of the blind spot of the right B-pillar.

In-car observation method: You need to tilt your head to the left and look at the front and back of the B-pillar before you can see it.

You can only see the right side when you look at the front and rear windows of the right B-pillar with large back inclination. This is often used when turning left and right, so it is very important to observe the blind spot of B-pillar with this inclination.

It is pedestrians who drive the driver off. As pedestrians, there are also jingles that adults and children have to recite. That is: don't run in front of the car, don't stay behind it, don't stand by and watch the car, don't chase it on the road, and pull over when the car comes. The white light is on, get out of the way! This white light refers to the reversing light!

Million car purchase subsidy