Safety supervision annual work summary report

#worksummary# Introduction Work summary is an important part of doing all the work well. Through the work summary, you can clarify the direction of the next work, avoid detours, make fewer mistakes, and improve work efficiency. The following is the "Safety Supervision Annual Work Summary Report" compiled for you by the Work Summary Channel. I hope it can help you!

Annual Work Summary Report of Safety Supervision (1)

20## is the Year of Safety Production. Under the unified leadership of the Provincial Agricultural Machinery Bureau and the Municipal Safety Committee, the city’s agricultural machinery department has The requirements of "Three Actions" and "Three Constructions" take the implementation of agricultural machinery safety laws and regulations as the main line, focus on tractor source management and hidden danger investigation and rectification, and effectively strengthen "team building, equipment construction, and business standardization construction" as the main line. The main content is the construction of agricultural machinery supervision and service capabilities. It has achieved good results in the establishment of safe agricultural machinery, source management and business standardization construction, and has fully completed various agricultural machinery safety objectives and tasks assigned by the province and city.

1. Completion of agricultural machinery safety supervision target tasks

1. Comprehensive completion of the agricultural machinery safety production control assessment indicators issued by the municipal government in 20##, with zero major accidents and no major accidents The starting number is zero, which does not exceed the average of the previous three years.

Completion of various indicators of the second agricultural machinery supervision business

1. Tractor business

There were 126 new tractors installed in the city and 57 tractors were scrapped; 3,867 tractors were inspected, 3,777 tractors were insured under compulsory traffic insurance, and 3,743 tractors were insured under commercial insurance.

2. Tractor driver (operator) business 3. Implementation of agricultural machinery safety production system 4. Agricultural machinery safety publicity 5. Carry out agricultural machinery administrative law enforcement 2. Main highlights

1 Jointly issued a document with the Municipal Work Safety Supervision Bureau to fully launch a new round of safe agricultural machinery creation work in the city. The city has officially planned 3 safe agricultural machinery demonstration zones and counties, 7 demonstration towns, 21 demonstration villages, and 300 demonstration households.

Second, the city's agricultural machinery supervision business has been further standardized. Two documents were issued throughout the year to standardize the agricultural machinery supervision business, mainly involving the use of the provincial agricultural machinery supervision network* system and the implementation of the "Agricultural Machinery Operation Safety Technical Conditions" , tractors and driver license issuance and other businesses, the intensity of prevention, control and supervision has been strengthened from the source.

The awareness of “comprehensive supervision” in Sannong Machinery Supervision has been further strengthened. The city's agricultural machinery supervision department has comprehensively carried out the supervision of agricultural machinery and equipment that poses a risk of personal injury, such as micro-tillers and green feed choppers, and has included self-propelled agricultural machinery such as micro-tillers and their operators in license management, which has greatly It improves the safe operation awareness of agricultural machinery operators and reduces the occurrence of agricultural machinery safety accidents.

Fourth, we have carried out the "Three Actions" and "Three Constructions" activities in depth, and continued to explore and practice new tractor supervision models such as joint law enforcement and agricultural machinery fleet management. Most districts and counties in the city have established effective Agricultural machinery fleet management system.

Five agricultural machinery safety publicity achieved good results, and 4 articles and information were published in the provincial professional magazine "Sichuan Agricultural Machinery". The agricultural machinery supervision stations of Xuyong and Hejiang counties won the gold medal and third prize respectively in the "Jifeng Cup" agricultural machinery safety knowledge competition.

3. Main measures

1. Implement the responsibilities for agricultural machinery safety production at all levels 2. Strengthen the construction of agricultural machinery safety system

System is the key to safety production work. In accordance with the requirements of safety production ledger management and according to the characteristics of agricultural machinery safety supervision work, we have reorganized the previous systems and policies and classified them into categories, focusing on establishing the agricultural machinery safety production system, agricultural machinery safety laws, regulations and policies, and agricultural machinery safety production responsibilities. An agricultural machinery safety supervision ledger with the main content including books, agricultural machinery safety production personnel, agricultural machinery safety supervision equipment, agricultural machinery supervision price licenses, agricultural machinery supervision household permits, and agricultural machinery safety publicity. The municipal agricultural machinery production safety leading group was readjusted, the "×× Municipal Agricultural Machinery Safety Production Responsibility Risk Margin System" was revised and supplemented, 3 new normative documents regulating tractor registration were issued, and 4 municipal-level agricultural machinery safety regular meetings were held. .

The "Three Actions" and "Three Constructions" of agricultural machinery production safety are solidly promoted

According to the Ministry of Agriculture and the Provincial Agricultural Machinery Bureau's "Three Actions" and "Three Constructions" of agricultural machinery production safety In the spirit of the notice of "Three Constructions", our bureau conscientiously carried out overt inspections and unannounced inspections of agricultural machinery safety in the city's fourth agricultural production

According to the requirements of the Municipal Safety Committee on carrying out overt inspections and unannounced inspections of production safety, our bureau The "×× City Agricultural Machinery Safety Production Safety Investigation Team" was specially established. The team is personally led by the bureau leaders, divided into tasks, and adopts various inspection forms such as unannounced visits and surprise visits. It conducts open and secret inspections of the city's agricultural machinery production safety units from time to time. . Since the establishment of the overt inspection and undercover inspection team, it has carried out major inspections of the city's agricultural machinery production safety during important festivals such as New Year's Day, Spring Festival, May Day, and National Day, as well as Bai'an activities and safety production months. It has carried out 9 overt inspections and 3 undercover inspections. inspection work. The objects of inspection include agricultural machinery supervision license issuing units, agricultural machinery production and operation enterprises, large agricultural machinery majors, agricultural machinery fleets, and agricultural machinery maintenance factories. 46 units were inspected throughout the year. For problems such as incomplete safety ledgers and tractors missing inspections, the responsible units were instructed to make rectifications and improvements within a time limit. Through open and covert inspections, problems were discovered, hidden dangers were eliminated in a timely manner, accidents were strictly prevented and controlled from the source, and the safe and orderly development of agricultural machinery production in the city was promoted.

(5) Pay close attention to the source management and supervision of tractors

In 20##, during the annual inspection of tractors, the agricultural machinery supervision departments at all levels in the city carefully organized the work in accordance with the tractor inspection standards. Tractor drivers are educated on laws and regulations and learn safety knowledge. Drivers who participate in inspections are organized to study the "Road Traffic Safety Law", "Tractor Registration Regulations", and "Tractor Driver Application and Use Regulations" and distribute them uniformly. The "Safety Knowledge Reader" has been published so that everyone has a copy of it. Before annual inspections are carried out, agricultural machinery maintenance enterprises with qualification certificates of Level 2 or above shall carry out maintenance and inspections of Level 2 or above. After obtaining certificates of maintenance of Level 2 or above, agricultural machinery supervision inspectors from various districts and counties will conduct safety inspections. Technical inspection. In particular, the tractor's body, direction, brakes, brakes, lights, enlarged characters, etc. are carefully and strictly inspected one by one. For safety facilities such as handbrakes, lights, brakes, etc. that are unqualified, we will urge them to update or carry out maintenance and debugging until they pass the inspection, and no detail will be missed.

In terms of tractor registration, we strictly follow the laws and regulations and the Provincial Agricultural Machinery Bureau’s licensing documents, and those that do not comply with the regulations will not be admitted. Two district and county inspectors are required to personally inspect the vehicle on site, and the registration application can only be accepted after the registration application form filled out by the tractor owner and the tractor technical information submitted are verified with the actual tractor on site.

In terms of tractor driver examination, subject examinations are conducted strictly in accordance with relevant regulations. For students trained by driving schools, after applying to agricultural machinery supervision stations in various districts and counties, the Municipal Supervision Office will send personnel to conduct on-site supervision of the driving license examination in each district and county. If it is impossible to send personnel to conduct on-site supervision, the Municipal Supervision Office will Directly entrust qualified supervisors who have been trained by the provincial headquarters to apply for the tractor driving test. Those who fail the test will be returned to the original driving school to study again.

In terms of safety learning for tractor owners and drivers, agricultural machinery supervision stations in various districts and counties take agricultural machinery fleets as the main body, and cooperate with driving associations, traffic police, transportation administration and other departments to regularly urge each agricultural machinery fleet to carry out safety training for tractor owners and drivers. Carry out safety education and study for drivers, and sign and seal the driver’s safety learning certificate to record each period of study.

IV. Existing problems

First, agricultural machinery safety supervision facilities are still very weak, safety supervision methods are primitive and backward, and safety inspections rely entirely on manual work based on experience, resulting in tractor driving tests and safety inspections. remains at a low level for a long time.

Secondly, due to the lack of strict implementation of the national and provincial tractor policies, the phenomenon of tractors entering households in neighboring provinces and cities as well as individual prefectures and cities in the province has become serious. It has caused great hidden dangers to the safe production of agricultural machinery in our city.

Third, there is a serious shortage of funds for agricultural machinery safety supervision. Funds for joint law enforcement with safety supervision, public security, transportation and other departments are not guaranteed, and an effective long-term joint inspection and law enforcement mechanism cannot be formed, resulting in tractors being out of inspection and out of warranty. The phenomenon is serious and poses a major safety hazard to agricultural machinery.

V. Work Plan for Next Year

First, conscientiously publicize and implement the "Regulations on the Safety Supervision and Administration of Agricultural Machinery of the People's Republic of China" and the "Technical Conditions for Safety in the Operation of Agricultural Machinery" To implement the work, strengthen the source supervision of agricultural machinery and equipment involving personal safety, such as tractors, combine harvesters, tillers, green feed choppers, etc., strengthen the construction of agricultural machinery supervision, law enforcement and supervision capabilities, and strictly prevent the occurrence of major agricultural machinery safety accidents.

2. Continue to promote the standardized construction of agricultural machinery safety supervision work, comprehensively launch the agricultural machinery supervision network* and job standard management work in the city, focusing on the implementation of the two specifications of the Ministry of Agriculture. We will do a good job in the "Twelfth Five-Year Plan" for the construction of agricultural machinery supervision equipment, actively raise funds, and promote the construction of agricultural machinery supervision equipment in the city to a higher level.

3. Promote the "comprehensive supervision" of agricultural machinery safety and strengthen the safety supervision of agricultural machinery and equipment that endanger personal safety, such as micro-tillers and green feed choppers.

Fourth, earnestly promote the creation of "Safe Agricultural Machinery" and build an agricultural machinery safety guarantee system.

Fifth, continue to carry out the "civilized supervision and quality service" activities for agricultural machinery safety, and focus on building the agricultural machinery supervision team.

Safety Supervision Annual Work Summary Report (2)

20## is coming to an end. Looking back on the work in 20##, there is the joy of fruitful results and the joy of working with colleagues to tackle key problems. Hardships, but also melancholy when encountering difficulties, time flies, and before you know it, the promising year 20## is coming. Here is a summary of the important work of this year as follows:

1. Personal Main work content of the year

During this year, I mainly participated in the first phase of the customs closure project of the Yantai Port Bonded Port Area, the survey of underground pipelines in Yantai City, and the repair project of the three jetties of Yantai Port. Comprehensive building displacement observation, as well as measurement work for multiple company projects.

2. Fulfillment of job responsibilities

During this year’s work, I still carried out various tasks with an attitude of learning while working, summarizing the process and results of each job. Key points, identify problems that you don’t understand, consult the regulations in a timely manner and ask leadership colleagues for advice, and accumulate work experience bit by bit.

In terms of project quality, strict supervision is carried out in accordance with the supervision specifications, engineering drawings and "Supervision Rules". When I participated in the bonded port area closure project, I spent most of my time at the construction site. The project seemed simple, but the construction site was very large, with many points being constructed at the same time. It was necessary to focus on the key points of supervision in order to reduce the workload and improve the work at the same time. Efficiency and effectiveness. If you find a problem that you cannot solve by yourself, report it to the project leader in a timely manner and consult the relevant specifications. While solving the problem, you will also fill your knowledge gap in this area. You can solve it independently next time you encounter a similar situation. The parts that need to be inspected will be inspected throughout the entire process and records will be kept. Concealed projects that need to be inspected will be inspected in strict accordance with the acceptance specifications. If the inspection fails, the next step of the construction process is strictly prohibited. Inspect and confirm the quality certification documents of original voucher test reports for incoming materials, equipment, etc., and conduct witness sampling and parallel testing of steel bars, interlocking blocks, etc. For projects with cross-cutting operations, the construction sequence of each construction unit will be coordinated on-site to strive to achieve. At the end of each month, the on-site construction status will be checked against the construction plan. If the progress falls behind, the construction unit will be required to take measures to speed up construction while ensuring quality.

In terms of project data, we write a supervision diary based on the conditions at the construction site every day, organize and archive the day’s side station records and other data, and urge the construction unit to report the corresponding project data. Regularly organize and file witness sampling, parallel testing and other data, and keep a good account of each item, and strive to have all the data ready and filed by the end of the project.

3. Work experience and shortcomings

Through this year’s supervision work, I feel that as a supervisor, I can only have good conduct, be strict with myself, integrate into the team, respect others, Only by working seriously and responsibly will you win the respect of others. I was exposed to many new things at the construction site. With the careful guidance and help of my old colleagues, I learned a lot of new theoretical knowledge and practical experience, which broadened my knowledge. I have gained a lot from this year's work, but there are also many shortcomings. Insufficient work experience, lack of meticulousness and lack of patience when facing more intense work, these shortcomings have also led to many flaws in my work. In my future work, I will study diligently, constantly sum up experience, draw lessons, correct my own shortcomings, and strive to maximize my strengths and avoid weaknesses.

IV. Opinions on personal career development and the company next year

When engaging in supervision work, no matter how much you know, it is too little, and you will never be satisfied with the present. Therefore, I will still want to do more next year. Ask, learn more, do more, and gradually learn various professional knowledge in depth according to work needs. In work and life, we must abide by the company's various management systems, strengthen the cultivation of team awareness, further integrate into our collective, and use our spare time to learn more norms and read some relevant papers to improve our professional level. I also hope that the company will organize more training for our new employees so that we can better adapt to this job, so that we can do more for the company.