What if Armani's mechanical watch stops?

Send it to professional maintenance personnel for maintenance.

There are two situations in which the mechanical watch does not work. The first is due to the lack of kinetic energy, and the second is due to the failure of the mechanical watch. Common faults include knocking, movement gear dislocation, watch magnetism, dry sludge after long-term storage, etc., which will cause the mechanical watch not to go, so don't be too flustered when you find the mechanical watch not to go, and remember not to disassemble it yourself.

Skills of using mechanical watches:

1. Watch with manual winding movement should be wound at the same time every day, so that the watch will have enough energy in the next 24 hours.

2. For a watch with an automatic winding movement, its energy comes from the movement of the wearer's arm, and it is not necessary to wind it manually under normal wearing conditions. Only when the wearer's exercise is not enough to replenish enough energy for the clockwork, can it be compensated by manual winding, and the crown rotation is controlled within 20 turns when winding.

Don't let the watch suddenly quench and heat. The sudden change of temperature will increase the travel time error of the watch. The internal spring of mechanical watch is easy to break due to the rapid change of temperature, and the rubber ring will accelerate the aging, so the waterproof performance of the watch will also be affected. ?

4. Watches that have been stored for a long time should be collected after cleaning and oiling, and should be wound 1-2 times a month to keep the watch running well. ?

Extended data:

Matters needing attention in maintaining mechanical watches:

1, when wearing a watch, the sweat on your hands is corrosive to the case. The all-steel case is made of nickel-chromium alloy, which has better corrosion resistance. The semi-steel case is made of copper, which is easy to corrode when exposed to sweat for a long time. You should always wipe off sweat with a soft cloth or pad a plastic watch stand to prevent it from being eroded by sweat.

2. Don't open the back cover of the watch at will to avoid dust entering the movement and affecting the normal work of the watch. ?

3. Don't put the watch and mothballs together in the wardrobe, lest the watch oil go bad.

Don't put your watch on the radio or TV to avoid magnetization.

5. Watches that are not worn for a long time should be wound regularly once a month to prevent the parts from being in a static state for a long time, so as to ensure the running performance of the watch machine.

6. Although wear-resistant materials are wear-resistant, they cannot withstand strong impact, and some substances with the same hardness or higher may damage these materials.

Baidu Encyclopedia-Armani Watch Series