How to use WEY VV6 reverse linkage function?

The rearview mirror reversing linkage function can make the exterior rearview mirror on the co-pilot side automatically adjust to the storage position suitable for reversing when reversing. After exiting the R gear, the exterior rearview mirror automatically returns to the use position before reversing.

● Switch the gear lever to the R position, and hold down the SET button on the driver's seat for a long time until you hear the prompt tone, indicating that the rearview mirror reversing linkage function has been turned on.

● Switch the gear lever to the R position, and hold down the SET button on the driver's seat for a long time until you hear two prompts, indicating that the rearview mirror reversing linkage function has been turned off.

● When the rearview mirror reversing linkage function is turned on, the reversing linkage position of the exterior rearview mirror can be re-stored by performing the following operations:

1. Shift the shift lever to R position.

2. Adjust the passenger's exterior rearview mirror to a position suitable for reversing.

3. Press the digital storage button on the driver's seat for a long time until the prompt tone is heard, and the reversing linkage position is successfully stored.

It should be pointed out that:

Only one reverse link position can be stored.

When using other buttons on the driver's seat to store the reverse locking position again, the previously stored reverse locking position information will be overwritten.