Zhuhai computer professional and technical certificate?

What are the vocational skills certificates for computer majors?

(1) Microsoft certification, including certificates of system manag

Zhuhai computer professional and technical certificate?

What are the vocational skills certificates for computer majors?

(1) Microsoft certification, including certificates of system management direction, database direction and development direction. They are called MCSE, mcdeba, MCAD/MCSD.

(2) There are too many 2)IBM certifications. (2) For example, the direction of e-commerce, databases, mainframes, development and so on. Because there are too many names, I won't list them here. If you are interested, you can go to IBM's website or Prometric or VUE's website (these are two national certification examination centers) (certification introductions of other international companies can also be viewed on the websites of these two examination centers).

(3)Lotus is a company owned by IBM, and Lotus's Notes certification was popular for some time. However, Lotus products are mainly used in office automation, so the market is relatively limited. As of April 13 and 12, few people have taken the lotus certification.

(4)Sun authentication mainly includes two directions, one is the management direction of Sun Solaris system, and the other is the very popular Java authentication direction. Among them, Java directions include: SCJP, SCJD, SCWCD, SCMAD, SCWSD, SCEA, etc. The highest level is Sun Certified Enterprise Application Architect.

(5)Oracle is mainly Oracle database management. Candidates of Oracle9iDBA need to attend at least one training course of Oracle Bone Inscriptions University, and only after passing the exam can they obtain professional qualification certification. This will prove that Oracle Bone Inscriptions has trained OCP.

(1) extended reading of Zhuhai computer professional technical certificate;

Domestic Certification Examination: Computer Rank Examination, commonly known as "Grade I" and "Grade II" of school computers, and National Computer Rank Examination (NCRE) of the Ministry of Education, is a national computer proficiency examination system approved by the former State Education Commission (now the Ministry of Education) and sponsored by the Examination Center of the Ministry of Education, which is geared to the society and used to examine candidates' computer application knowledge and ability.

The first-class certificate (1) shows that the holder has basic computer knowledge and preliminary application ability, basic skills in using Office automation (Office or WPS) software such as word processing, spreadsheets and presentations, and Internet applications, and the ability to engage in secretarial work and computerization of office information in institutions, enterprises and institutions.

(2) The second-class certificate shows that the holder has basic computer knowledge and basic application ability, can write programs and debug programs in high-level computer languages, and can engage in computer program compilation, primary computer teaching and training, and business and marketing work of computer enterprises.

(3) The third-level certificate of "pc Technology" shows that the holder has the basic knowledge of computer application, grasps the working principle of Pentium microprocessor and pc, is familiar with the function and structure of common external devices of PC, understands the basic principle of WINDOWS operating system, can use assembly language to program, and has the ability to engage in PC use, management, maintenance and application development in institutions, enterprises and institutions.

(4) Level 4 certificate shows that the holder has mastered the basic theoretical knowledge and professional knowledge of computers, is familiar with the basic principles and technologies of software engineering, databases and computer networks, and has worked in computer information systems and application systems.

Purpose of the certificate: This certificate is used nationwide, and it is a proof of the holder's computer application ability, and can also be used as a reference for the employing department to recruit and assess staff. In addition, all self-taught candidates who have obtained the qualification certificate of Grade One or above in the National Computer Rank Examination can be exempted from the self-taught courses "Computer Application Basis" (course code 00 18) and "Computer Application Basis" (course code 00 19).

According to statistics, there are currently more than 200 IT certifications. These certification trainings are mainly divided into three categories: the first category is enterprise certification introduced by manufacturers with software and hardware research and development capabilities. For example, Microsoft MCSE, Cisco series, Intel series certification, ADOBE graphic designer certification, Macromedia web designer Dream weaver MX and so on have been widely recognized.

The second category is the certificate formulated by the relevant state departments. For example, the national computer application technology certificate (NIT) examination, the national computer grade examination, the national computer software professional technical qualification and grade examination, and the national computer information high-tech examination. The third category is certificates issued by relevant international IT industry organizations. Such as the certification of American Computer Industry Association and Cambridge Information Technology Certificate of Cambridge University Examination Committee.

Compared with other students, students majoring in computer science have obtained IT certification. The biggest difference is that after four years of systematic study, they have completely mastered the basic knowledge of computer science. Their employment direction is more engaged in hardware technology research and development or software development.

Therefore, Microsoft MCP, ADOBE graphic designer certification, Macromedia web designer Dream weaver MX and other certification certificates only prove that the certificate holder has a certain practical ability to use software, but can not prove how many professional skills I have in the computer field.

What are the professional certificates of computer major?

1. China People's Intermediate Vocational Qualification Certificate (jointly issued by the Ministry of Labor and Social Security and the Ministry of Information Industry)-National General:

Intermediate computer operator professional qualification certificate

Intermediate computer maintenance professional qualification certificate

Professional qualification certificate of intermediate graphic designer

Professional qualification certificate of intermediate multimedia works producer

Intermediate programmer's professional qualification certificate

Intermediate network administrator professional qualification certificate

2. People's Republic of China (PRC) Higher Vocational Qualification Certificate (jointly issued by the Ministry of Labor and Social Security and the Ministry of Information Industry)-National General:

Senior computer operator professional qualification certificate

Advanced computer maintenance professional qualification certificate

Professional qualification certificate of senior graphic designer

Senior network administrator professional qualification certificate

Professional qualification certificate of senior computer multimedia producer

Professional qualification certificate of senior computer programmer

Computer professional qualification certificate

1. At present, there are two kinds of computer professional qualification examination certificates sponsored by the examination center of the Ministry of Education. The four-level certificate organized by your school is the fourth level of the national computer grade examination.

2. Whether the certificates of operators and maintenance workers you have obtained through the examination can be used depends on which institution issued the certificate and the scope of use of the certificate. At present, there is no such qualification certification in the examination center of the Ministry of Education.

3. There are two kinds of computer qualification examinations sponsored by the Examination Center of the Ministry of Education:

(1) National Computer Application Level Examination:

The English full name is "National Applied Information Level Examination", referred to as NIT. The NIT examination is sponsored by the Examination Center of the Ministry of Education and undertaken by provincial examination institutions and systems. The purpose is to better promote the popularization and development of information technology in China and cultivate applied information technology talents scientifically and systematically.

(2) National Computer Rank Examination:

The English full name is "National Computer Rank Examination" or NCRE for short. It is a national computer proficiency examination system approved by the former State Education Commission (now the Ministry of Education) and sponsored by the Examination Center of the Ministry of Education, which is geared to the society and used to examine candidates' computer application knowledge and skills. The exam is divided into four levels: level one, level two, level three and level four.

(3) Zhuhai Computer Professional and Technical Certificate Extended Reading:

National Computer Grade Examination _ Grade Introduction:

1, level 1: operation skill level.

Check the basic computer knowledge and computer operation ability, including office software, graphics and image software, and network security quality education.

2. Level 2: Advanced application level of programming/office software.

The assessment content includes computer language and basic programming ability, and participants are required to master a computer language. Optional categories include high-level language programming and database programming. The second level also includes the advanced application ability of office software, which requires participants to have computer application knowledge and advanced application ability of MS office software, and be able to make specific applications in the actual office environment.

3. Level 3: Engineer Preparatory Level.

The third-level certificate examines the application-oriented and career-oriented job professional skills.

4. Level 4: Engineer level.

The CET-4 certificate is aimed at candidates who have already held relevant certificates of CET-3, and it is an applied and career-oriented engineer post certificate.

What are the computer professional certificates?

What certificate does the computer major have?

At present, there are four levels of computer grade examination:

Level 1: check the basic knowledge of microcomputer and the basic skills of using office software and Internet.

Exam subjects in the second half of 2004: level 1 MS-OFFICE, level 1 WPS, level 1 B.

Level 2: Use an advanced computer language or database management software to check the basic knowledge of computers and the basic skills of programming and debugging on computers. Exam subjects in the second half of 2005: programming: C, Visual Basic, C++, Java, Visual, database: FoxPro, C++. The basic knowledge includes the following contents: data structure and algorithm, programming method, software engineering and database foundation.

Three levels: divided into four categories: PC technology, information management technology, database technology and network technology. "PC Technology" examines the hardware composition of PC, the basic knowledge of Windows operating system and the basic skills of PC use, management, maintenance and application development; "Information Management Technology" examines the basic knowledge of computer information management application and the basic skills of development and maintenance of management information system projects and office automation system projects; "Database Technology" examines the basic knowledge of database system and the basic skills of project development and maintenance of database application system; "Network Technology" examines the basic knowledge of computer network and the basic skills of computer network application system development and management.

Level 4: assess the basic knowledge of computer specialty and the basic skills of analysis, design and implementation of computer application projects.

In addition:

National computer technology and software professional qualification, primary (technician), intermediate (engineer) and advanced (system analyst) MLC Microsoft certification MCSD certificate.

CCNA registered programmer qualification certificate, network engineer, etc.

CCNA certificate-Cisco certified network engineer Cisco certified network engineer

Introduction of CCNA certification training:

CCNA certification (CCNA- Cisco Network Installation and Support Certification Assistant) is the most elementary certification in the whole cisco certified system, and it is also a necessary condition for obtaining CCNP certification, CCDP certification and CCSP certification (CCIP certification and CCIE certification are not mandatory), and many qualified Cisco professionals also require candidates to obtain CCNA certification first.

First, CCNA certification training

CCNA certification belongs to the entry certification of Cisco after-sales engineer certification system. Through CCNA, you can prove that you have mastered the basic knowledge of network and can initially install, configure and operate Cisco routers, switches and simple local area networks and wide area networks. CCNA certification means that the certified personnel have the basic technology and related knowledge of the networked small office/court office (SOHO) market. Professionals certified by CCNA can install, configure and operate LAN, WAN and dial-up access services in small networks (nodes below 100 or 100). The protocols they can use include (but are not limited to) IP, IGRP, IPX, serial, Apple, Talk, frame, relay, IP RIP, VLAN RIP, Ethernet and access list.

Second, training skills.

Routing LAN and WAN with simple installation, configuration and operation, and defining the contents of "simple" network, such as IP, IGRP, IPX, serial, Apple, Talk, Frame Relay, IP RIP, IPX RIP, VLAN, Ethernet and access list.

Third, CCNA can provide solutions based on training and practical experience:

1. Install and/or configure the network;

2. Obtain the directory by using;

3. Bandwidth on Demand (BOD), Dial-on-Demand Routing (DDR) and Inter function reduce bandwidth, reduce the cost of WAN and optimize WAN.

4. Provide remote access through integrated dial-up connection, traditional remote LAN-to-LAN access and the highest performance level required to support new applications such as Internet, e-commerce and multimedia.

4. Prerequisites for obtaining CCNA certification

Candidates can apply for CCNA without any certificate, and there is no hard and fast rule on the age, education and foreign language level of candidates.

Verb (abbreviation of verb) CCNA certification exam

There are two ways to take the exam now: 1, 640-801CNA; 2. Take 640-82 1 intro and 640-8 1 1 ICND respectively.

Six, the validity of CCNA certification

CCNA certificate is valid for three years. After three years, you need to take the recertification exam. If you get a higher level of cisco certified within two years, the validity period of CCNA certification will be automatically updated.

Seven. CCNA recertification examination

After the expiration of the validity period, you must take the exam of 640-8 1 1CND, or take any exam of CCNP, CCIP and CCSP, or take any exam of Cisco qualified college with the prefix of 642-XXX.

How to obtain computer professional and technical qualification certificate

Is it a soft exam?

Ask the personnel department or the science and technology department.

What are the certificates of computer class?

1, technical qualification certificate of computer technology and software.

2, the national computer grade certificate

What are the professional qualification certificates for computer majors?

Computer professional qualification certificate is a kind of "People's Republic of China (PRC) computer professional technical qualification (level) certificate".

The computer qualification examination is divided into five professional categories: computer software, computer network, computer application technology, information system and information service. Each professional category has advanced, intermediate and primary vocational qualification examinations.

According to the Interim Provisions on the Examination of Professional Technical Qualification (Level) of Computer Technology and Software:

Eleventh computer professional and technical qualifications (level) after the implementation of the national unified examination, no longer carry out computer technology and software corresponding professional and technical post qualification evaluation.

Article 9 Those who pass the computer professional and technical qualification (level) examination shall be awarded the computer professional and technical qualification (level) certificate of People's Republic of China (PRC), which shall be uniformly printed by the Ministry of Personnel and jointly printed by the Ministry of Personnel and the Ministry of Information Industry. The certificate is valid nationwide.

(7) Extended reading of Zhuhai Computer Professional and Technical Certificate:

Relevant regulations:

1. The personnel who have passed the examination and obtained the corresponding computer professional technical qualification (level) certificate show that they have the level and ability to work in the corresponding professional post. The employing unit may, according to the relevant provisions of the "Regulations on the Trial Implementation of Engineering and Technical Personnel Posts" and the needs of the work, select the appropriate professional and technical posts from those who have obtained the computer professional and technical qualification (level) certificate.

2. Technicians or assistant engineers can be hired after obtaining primary qualifications; You can hire engineers to obtain intermediate qualifications; Obtain senior qualification and be employed as a senior engineer.

3, computer professional and technical qualifications (level) after the implementation of the national unified examination, no longer computer technology and software corresponding professional and level of professional and technical post qualification evaluation work.

4, computer professional and technical qualification (level) certificate to implement a regular registration system, registered once every 3 years. Before the expiration of the validity period, the holder shall go through the registration formalities at the institution designated by the Ministry of Information Industry in accordance with relevant regulations.

What are the computer professional certificates?

1, Cisco certificate

Cisco certificate pays attention to the extensiveness of network knowledge and the close combination with practical operation. The teaching materials are from shallow to deep, and the teaching methods are flexible and vivid.

CCNA certification course content: including network operation, differences between different network products, how to design networks and troubleshoot, and other general knowledge.

2. Adobe

Adobe certification examination and certificate is one of the core contents of Adobe China Education Certification Program. Following the consistent development concept and principle of "international quality, made in China", under the quality control and standardized management, Adobe certification has been gradually recognized by the society and deeply rooted in the hearts of the people, and has become the mainstream industry certification standard in the digital art education market in China.

3、Linux

Linux certification refers to the qualification obtained through examination after obtaining professional Linux training.

20 13 Linux certifications widely recognized in the world include LinuxProfessionalInstitute (LPI), SairLinux and GNU, Linux+ and RedHat certificate engines.

4. Computer Grade Examination

Computer Grade Examination, an examination under the Ministry of Education, is divided into 1-4 grades. The highest level is level 4, which corresponds to the level of computer major undergraduate graduation. The examination is divided into two parts: theoretical examination (written examination) and computer examination.

5, computer software level and qualification examination

Organized by the Ministry of Information Industry and the Ministry of Personnel. Divided into multiple directions, each direction has three levels. However, the highest level is not set in every direction. Take the direction of program development as an example, there are programmers, software designers and system analysts (the highest level).

What are the computer professional qualification certificates?

Computer professional professional qualification certificates include: national computer first-class, second-class, third-class and fourth-class certificates. Intermediate (high) level network administrator professional qualification certificate, intermediate (high) level computer operation professional qualification certificate, intermediate (high) level computer maintenance professional qualification certificate, intermediate (high) level graphic designer professional qualification certificate, intermediate (high) level multimedia works producer professional qualification certificate.

What qualifications does a computer have?

The national computer grade examination certificate issued by the Ministry of Education is one of the required certificates for college students. There are grade one, grade two, grade three and grade four.

CEAC National Informatization Certification Examination Certificate issued by the Ministry of Information Industry is an authoritative standard to measure computer application-oriented and professional talents.

Computer proficiency test certificate issued by Ministry of Information Industry and Ministry of Personnel. Competency test focuses on software theory, such as programmers and senior programmers.

The computer vocational qualification certificate issued by the Ministry of Labor and Social Security is an employment-oriented vocational qualification examination.

Some training companies claim to co-organize such qualification certification and training with the Ministry of Labor and Social Security.

First, the national computer grade examination

At present, * * * has set four levels:

Level 1: check the basic knowledge of microcomputer and the basic skills of using office software and Internet. Examination subjects: first-class MS-OFFICE and first-class WPS.

, level 1 b

Level 2: Use an advanced computer language or database management software to check the basic knowledge of computers and the basic skills of programming and debugging on computers. Exam subjects in the second half of 2005: programming: C, Visual

Basic, C++, Java, Visual, database classes: FoxPro, C++. The basic knowledge includes the following contents: data structure and algorithm, programming method, software engineering and database foundation.

Three levels: divided into "PC technology",

Information management technology, database technology and network technology. "PC Technology" examines the hardware composition of PC, the basic knowledge of Windows operating system and the basic skills of PC use, management, maintenance and application development; "Information Management Technology" examines the basic knowledge of computer information management application and the basic skills of development and maintenance of management information system projects and office automation system projects; "Database Technology" examines the basic knowledge of database system and the basic skills of project development and maintenance of database application system; "Network Technology" examines the basic knowledge of computer network and the basic skills of computer network application system development and management.

Level 4: assess the basic knowledge of computer specialty and the basic skills of analysis, design and implementation of computer application projects.

Two, the national computer software professional and technical qualifications and level examination

Co-sponsored by the Ministry of Personnel and the Ministry of Information Industry, it conforms to the current professional level of the international computer industry and pays attention to the assessment of professional level and ability.

At present, * * * has six levels: junior programmer (equivalent to technician level), programmer (equivalent to assistant engineer level), senior programmer (equivalent to engineer level) and system analyst (equivalent to senior engineer level). Network programmer (equivalent to assistant engineer level) and network designer (equivalent to engineer level).

//kuangfeng /ReadNews.asp? NewsID=2854

The following is a more detailed answer about the examination time, content, qualification line and the difference from other certificates.

Three, computer professional qualification certificate

National vocational qualification network (//osta.cn/readnews.asp? News _ ID =11716) describes this series of certificates as follows:

Professional Name: Computer Programming

Occupation definition: a person who uses modern information technology to write and design computer software.

Occupation level: this occupation is divided into three levels.

Programmer (National Vocational Qualification Level 4)

Senior Programmer (National Vocational Qualification Level 3)

Programmer (National Vocational Qualification Level II)

These are the types of computer exams that exist in our country now.