Xiaomi's portable wifi has a signal after connecting to the mobile phone, but it can't access the Internet.

The main reason for this problem is that some dependent services are not automatically started or the host network is not shared with the wireless network created by Xiaomi's portable WiFi.

Solution steps:

Step 1: Confirm that the four basic services have been started.

1. Start four basic services.

Right-click the desktop computer-Administration-Services and Applications-and double-click the service.

Find the following 4 services, set the startup type to automatic, and then start the service.

2. Allow Miwifi to connect with Xiaomi's portable wifi, and an interception prompt box appears on the firewall. Please allow MiWiFi to connect to the public network. (If you don't know whether it has been published, you can find it in Firewall-Advanced Settings-Inbound Rules) 3. Turn off the public network location setting of Windows Firewall.

Be sure to mention MiWiFi before putting it in the station. If you don't use a firewall, you can open Control Panel-System and Security-windows Firewall-Turn windows Firewall on or off.

Home or work (private) network location settings-Turn off Windows Firewall public network location settings (Turn off Windows Firewall).

Please note that the first four services cannot be shut down. (If you want to continue to use the firewall, please ignore this article. )

4. Check whether the antivirus software takes over the system firewall. If yes, please monitor it in the firewall of anti-virus software, and let MiWiFi enter the station after inspection. At this time, you can plug in Xiaomi's portable WiFi again, which can basically be used normally.

If not, please continue with the following steps. Step 2: Open the Internet * * * Enjoy Center; Step 3: Open the adapter settings; Step 4: Open the local connection (or broadband connection) property;

Step 5: Turn on * * * to share local network connection with Xiaomi's portable WiFi.

Select Allow other network users to connect through this computer's Internet connection.

If there is a sub-option "Home Network Connection", please select the network card created by portable Xiaomi portable WiFi (the name is subject to the name actually created).

Of course, according to different operating systems, the style of this page may be different. Just look for "* * * to enjoy";

Then re-plug Xiaomi's portable WiFi for normal use.

The above five steps can basically solve most problems that you can connect normally but can't surf the Internet.

Let's talk about a few special cases:

1. When "OK" is used in the fifth step above, "Incorrectly dependent services or groups cannot be started when Internet connection * * * access is started" will appear.

Generally, the system is streamlined or some services are not started.

Treatment method:

?

Start related services, and locate the drive C windows“system32 "log file WMI WMI, and right-click the administrator to obtain ownership. Restart after obtaining permission, plug in the power first.

Wifi, after establishing wifi, open the Internet connection according to the above steps (once opened, you don't need to set up the same portable wifi), and the problem of mobile Internet access will be solved.

2. The fifth step above prompts that "Starting ICS service cannot be started, error 1068: Dependent service or group cannot be started".

First, make sure that all four services in the first step are started! Especially the window firewall!

Treatment method:

Right-click My Computer-Administration-Services and Applications-Services.

exist

Among all the services, one named. Internet connection

Share) ~ ~ Right-click on this service-Properties-select startup type: automatic-select dependency tab-you can see that this service depends on four components-and return to the service list.

Locate these four components and set them all to start automatically. If you don't try to start them manually, it's ok ~

The reason why ICS can't be started is generally that the components of Remote Access Connection Manager ~ ~ check the dependency of this service as above and set it to automatic one by one.

If there is still a warning that it cannot be started, it may only be that the component Secure Socket Tunneling Protocol service failed to start ~ ~ Generally, its warning prompt is: stop after starting, and some services will automatically stop when they are not used by other services or programs.

There are two other solutions:

1)

Start menu-Run -regedt32, open the registry and navigate to "HKEY _ Local _ Machine \ System \ Current Control Set".

\ Services \ Rasman \ dependent service ",and then left-click Dependent Service.

",find" DependOnService "in the project displayed in the right window. Double-clicking it will pop up an "Edit Multi-String" window and delete the numerical data in this window.

SstpSvc ",and then click OK to close the registry and restart the computer.

2) Obtain the permissions of the System32\LogFiles folder and the System32\wbem folder (including the permissions of all subfolders of these two folders), add administrator permissions to the file System32\LogFiles\WMI, and restart the computer. This method is effective on some computers. )

It is said that this is because the administrator authority problem cannot be started, if both methods are not applicable. . = =。 . Please reinstall the system.

3. Start ICS service failed to start, error: (null)

This problem is generally because the windows firewall is turned off, so it will be fine after starting ~ ~ So don't turn off this service at first, just set the automatic start directly.