How to set Meizu mobile phone to dual signal display mode?

1: Enter the SMS interface, click Settings-Flyme information in the lower right corner, open Flyme information and log in to Flyme account.

2: Select the receiving method. And activate.

3. Correct network information display

1. Solution to failure in sending activation SMS: 1. The mobile phone card itself is limited, so it can't send an activation message to the SMS platform, and it can't send a message manually to 10698000888. This kind of mobile phone card needs to contact the operator and lift the SMS restriction of the operator before it can be activated successfully;

2. Some mobile phone cards meet the requirements of SMS activation. The network is normal and the balance is normal. Sending message to SMS platform manually succeeded, but SMS could not be activated. Cause of the problem: the user manually modified the SMS center number, or the SMS center number obtained was wrong, so Charming Friends need to manually modify the SMS center number and submit the update. The operating steps are as follows: In the telephone dialing interface, enter * # * # 4636 # * #. A menu item will pop up. Select "Mobile Phone Information" in the top line to enter the mobile phone information interface, drop it down to the bottom, and click "Refresh" to get the number of the SMS center, as shown in the figure below.

Charming friends with the wrong number in the SMS center need to add a plus sign in front of the obtained 86xxx to become +86xxx, then enter the SMS setting interface, set the number of the SMS center with the same number to +86xxx, then return to the above interface and click the "Update" button; After the SMS center number is successfully updated, the network SMS function can be activated normally;

3. If it still doesn't work, you can activate it through other mailboxes, create new information, and enter the other party's Flyme account, and the function will be normal.