Mobile phone brush receives short messages

Hello, there are four ways. You can try. OTA system push, settings → about mobile phone → system update line brush; 1, turn off the phone, unplug the data cable, press and hold the volume button, don't let go, and then press and hold the power button and both buttons for five to ten seconds, and the phone will get stuck in the Wo3G logo. (This is the so-called brushing mode) This step is the most important. If this step is not completed, please take your own risk! 2. Connect the data cable. At this time, pea pods will prompt to install the driver and let it install for a while. If the prompt fails, please open the device manager (device manager; Right-click my computer and you will see it. If not, click Manage, and then click Android Tabiet. If there is a question mark or exclamation point, it means that your driver is not installed. You can open the Sonic ADB Driver folder in this package, install the driver, and restart the computer after installation. If not, you can continue to do the next step. 3. After all is finished, you can take the last step. Open this package, and then find the folder "Double-click here to start brushing". After opening it, just follow the prompts. What I am doing now is waiting. After I finish brushing, the phone will automatically restart. After restarting, unplug the data cable of your mobile phone and see if there is such an icon "super user" on your mobile phone. If so, you have succeeded! Before I talk about swiping, I'll introduce a swiping assistant, which is also something to swipe before swiping, and that is re. The method of RE brushing is as good as that of wire brushing. Turn it off when you're done. Press and hold the power on button and the volume up button, and the phone will enter the RE interface. If English appears, it means that you didn't brush it successfully. You can brush it again according to the line brush method to see what went wrong before. 1, and the download package is directly placed in the root directory of the memory card. 2. Unplug the data cable of the mobile phone and turn it off normally. 3. Press and hold the volume up button, and then press and hold the power on button to enter the re-interface 4. Use the volume up and down keys to choose to return to the factory settings, and press the power button to confirm. 5. After recovery, select the option to update, and then press the power button to confirm. 6. Click to select the upgrade package from the SD card. Select the package you want to swipe your card. 7. See the prompt; If the update is successful, you can choose to restart the system, which means that your card is successful. Compulsory brushing; 1, format SD card (optional). 2. Right-click to extract the official package, and a folder named dload will appear, which will be placed in the root directory of the SD card. (Make sure there is update.app in the file) 3) 3. Turn off the phone, insert the SD card, and press and hold the volume up key+volume down key+on/off key at the same time, the phone will enter the forced brushing mode, and then start the forced brushing. 4. When the progress bar is full, the phone will automatically restart. If not, please remove the battery manually.