Installation skills of curtain slideway

The installation of curtain slide requires some skills. This article will introduce the installation steps and selection guide of curtain slide rail for everyone.

Positioning and measurement

In the first step of curtain slide rail installation, we must draw the positioning line accurately. In order to ensure the stability of the slideway, we need to carefully measure the required installation size. For cement walls or roofs, we may need to use expansion screws to fix the slideways.

Pulley insertion and track breaking treatment

When the window width exceeds 1200mm, the curtain rail should be properly disconnected and bent at the disconnection point to ensure that the curve is smooth and the lap length is not less than 200mm. This can not only ensure the uniform stress on the slideway, but also ensure its stability.

Sealing and fixing

After installing the pulley, we need to block the slideway with a seal to prevent the pulley from rolling off the track. At the same time, in order to protect the sharp corners of the crawler from being scratched, we also need to ensure that both ends of the crawler are sealed. Finally, the clamping groove of the fixing piece is connected and fixed with the track, and the curtain slideway is installed.

Lightness and silence

High-quality curtain slides should be light and almost silent when opening windows, which can greatly improve the comfort of living.

Smooth and smooth

The strength and bearing capacity of the slide rail are also important reference indexes for purchasing.

Smooth appearance

The shape of the slideway should be beautiful, and the surface should be smooth and flawless.

Safe and reliable

High-quality plastic steel window rails should have high tensile strength, high oxygen index, high elongation at break and excellent heat resistance.