Can the carpentry shed at a construction site be located on the floor?

No

During the construction process, carpentry construction is often required, such as making formwork, etc., and steel bar processing is also required, such as welding and bending of steel bars. The above construction operations are generally They are all carried out near the building. During the construction of the building, objects falling from the sky may cause personal injury to the construction workers at any time

1. The erection of the woodworking processing shed must not only meet the specifications and It meets the requirements for use, and is rainproof, windproof, smashproof, clean and beautiful, and has China Construction safety slogans. The floor of the woodworking area should be hardened.

2. Woodworking sheds erected within the swing radius of the tower crane and around the building must be equipped with a double-layer hard protective roof.

3. The roof and sides of the woodworking protective shed are painted in blue, and protective railings are erected on both sides in the long axis direction to seal them. The upper pole is 1200mm high and the lower pole is 600mm high. The protective railings are painted red and white (black and yellow) in alternate warning colors. The China Construction logo and the name of the processing shed should be spray-painted on both ends of the protective shed.

4. A “Beware of Mechanical Damage” sign is hung under the eaves on the right side of the steel processing shed on the side facing the construction road, facing the construction road. Notice board size: width × height: 800mm × 1700mm. Hang the operating procedures plate under the eaves on the opposite side. The size of the picture plate is: width × height = 3000mm × 1500mm. The card faces inwards.