Identification mark of reinforcement processing shed

Legal analysis: 1. The specific size of the tool-type reinforced woodworking shed is determined according to the actual situation on site;

2. Within the radius of gyration of tower crane and buildings around the workshop, double-layer hard protection must be erected;

3. The floor of the processing workshop needs to be hardened, and the concrete floor should be selected;

4. Banners with safety warning signs and safety propaganda terms should be hung on the top of the processing workshop, with the width of1m; ;

5. Tool-type steel bar processing shed The wooden shed needs to hang an operation instruction board in a conspicuous place, and the size is: width× height = 2000 mm×1000 mm;

6. The specifications of various profiles and components are reference values, and the specific specifications should be calculated according to the local wind load and snow load;

7. In case of typhoon in the southern region, windproof measures should be taken, and cable wind ropes can be set.

Legal basis: People's Republic of China (PRC) Construction Law.

Fifty-second construction survey, design and construction quality must meet the requirements of the relevant national construction safety standards, and the specific management measures shall be formulated by the State Council.

When the national standards for construction engineering safety cannot meet the requirements of ensuring construction safety, they should be revised in time.

Article 53 The state practices a quality system certification system for units engaged in construction activities. Units engaged in construction activities may, on a voluntary basis, apply for quality system certification to the certification bodies recognized by the product quality supervision and management departments of the State Council or the State Council. After passing the certification, the certification body will issue a certificate of quality system certification.