What are the types and uses of adhesive tape?

1. Sealing and fixing to protect various products. Anti-static tape 2. Provide protection during production process. 3. Widely used for structural bonding of metal, plastic, glass, ceramics and other materials, such as the fixation of plastic components of electronic products, laminated glass, etc. 4. Anti-static tape is used as a warning for static-sensitive products or anti-static areas. 5. Anti-static warning floor tape is used in anti-static areas and contains warning slogans in Chinese and English. Storage, transportation, use and maintenance of the tape 1. The tape should be stored in the warehouse to avoid sunlight and rain; it is forbidden to come into contact with acid, alkali, oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature should be between -15℃~40℃ between. 2. The tape should be placed in a roll without folding. If stored for a long time, it should be turned once a quarter. Anti-static warning floor tape 3. When loading and unloading the conveyor belt, it is best to use a crane and use a rigging with a beam to lift it smoothly to avoid damaging the belt edges. Do not load and unload the conveyor belt arbitrarily, which may cause the sleeve to loosen and throw away. 4. The type and specifications of the tape should be selected reasonably according to the use needs and specific conditions. 5. Tapes of different varieties, specifications, models, strengths, and layers of cloth must not be connected (matched) used together. 6. It is best to use hot vulcanization adhesive joints for conveyor belt joints to improve reliability and maintain high effective strength. 7. The diameter of the conveyor's transmission roller and the minimum pulley diameter of the conveyor belt should comply with relevant regulations. 8. Do not let the tape snake or creep. Keep the drag roller and vertical roller flexible, and the tension should be moderate. 9. When the conveyor is equipped with baffles and cleaning devices, wear and tear on the tape should be avoided. 10. Cleanliness is the basic condition for the good operation of the tape. Foreign substances will affect the tape's eccentricity, tension difference, and even breakage. 11. When early damage to the tape is found during use, the cause should be found and repaired in time to avoid adverse consequences. Market Prospects for Tape Production With the rapid improvement of social economy and people's living standards, tape has been fully integrated into the use of tapes in all walks of life and people's daily lives. All provinces, cities and counties across the country have wholesale markets of varying sizes selling tape products. Adhesive tapes (printed tape, transparent tape, colored tape) are sold everywhere in building materials stores, hardware stores, small shops, stationery stores, supermarkets, etc. It is widely used in packaging sealing in almost various industries such as food, medicine, cigarettes, household appliances, and daily chemicals. If calculated based on the usage of a medium-sized food production enterprise in a prefecture-level city, the cost of sealing tape used every year will be at least hundreds of thousands of yuan. The annual tape market consumption in a small and medium-sized city is more than 10 million yuan. Adhesive tape is widely used, used in large quantities, and has unlimited market potential. It is indeed an ideal choice for laid-off workers, second jobs, and tertiary industries to invest in and set up factories. To open a tape production factory, the amount of capital invested in tape can be more or less depending on the size of the location, your own investment capacity, and the amount of tape invested. Generally, you can start a factory with about 30,000 yuan. With the rapid growth of the market economy, the demand for tapes in the tape market is also increasing. According to "Packaging Magazine" and "Industry News", China's tape production and sales in 2005 were approximately 3 billion rolls. The market prospects are very broad and the business opportunities are unlimited. . Tape is a traditional industry. Every household needs to use tape, and merchants and manufacturers are inseparable from tape. The classification of tapes is based on the base material: It can be divided into BOPP tape, cloth tape, kraft paper tape, masking tape, fiber tape, PVC tape, PE foam tape, etc. According to the scope of application: it can be divided into warning tape, carpet tape, electrical tape, protective film paper tape, stretch film tape, sealing tape, module tape, etc. According to market penetration rate: it can be divided into ordinary tape and special tape. According to the application environment temperature, it can be divided into low temperature tape, normal temperature tape and high temperature tape. Heat-sealing tape Heat-sealing tape is heated by special equipment (hot air seam sealing machine or high-frequency heat sealing machine) and sewn at the pinholes of the knitted bones of raincoats, tents, air balloons and other waterproof and gas-proof products to achieve the desired performance. A kind of tape with sealing (water leakage and air leakage prevention) effect. Types of heat sealing tapes: PVC, composite PU, pure PU (TPU), hot melt film, rubber tape, non-woven tape, three-layer cloth tape.

Technical standards for heat sealing tape: European toxic element EN71.PART3:1994 safety testing standard EU toxic element EN1122:2001 safety testing standard EU 2002/61/EC restricted ammonia dye standard does not contain Vinyl Chloride Monomer Purpose of heat sealing tape: Heat Sealing tape is widely used in waterproof-related products such as cold-proof clothing, ski clothing, down jackets, sailing clothing, diving suits, tape tents, car and boat covers, raincoats, motorcycle raincoats, waterproof shoes, as well as space suits, lift-off balloons, chemical protective clothing, etc. Gas-proof products. Belonging to the Wujiao chemical category (hardware adhesive chemical industry) butyl tape 1. Material composition Butyl rubber waterproof sealing adhesive tape is a mixture of butyl rubber and polyisobutylene and other main raw materials. According to a special production formula, it is used The latest patented technology uses high-quality special polymer materials (imported) and is an environmentally friendly solvent-free sealing bonding material produced through a special process. 2. Product features (1) Excellent mechanical properties: high bonding strength and tensile strength, good elasticity and elongation properties, and strong adaptability to interface deformation and cracking. (2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance. Tape (3) Reliable application performance: It has good adhesion, waterproofness, sealing, low temperature resistance and followability, and good dimensional stability. (4) The construction operation process is simple. 3. Scope of application (1) Roof waterproofing, underground waterproofing, waterproofing of structural construction joints and polymer waterproof membrane overlap sealing of new projects. (2) Sealing and waterproofing treatment of construction joints of subway tunnel structures in municipal projects. (3) The joints of the colored profiled panels are airtight, waterproof and shock-absorbing. Air tightness, waterproofing and shock absorption at the joints in the solar panel project. (4) Bonding and sealing treatment in automobile assembly (5) Waterproof sealing treatment at joints in steel structure construction (6) Composite aluminum foil butyl tape is suitable for various civil roofs, color steel, steel structures, and waterproof membranes , PC boards, etc. Waterproof sealing purposes under sunlight 1. Sealing and fixing to protect various products 2. Provide protection during the production process 3. Widely used in structural bonding of metal, plastic, glass, ceramics and other materials, such as Fixing of plastic components of electronic products, laminated glass, etc. Transparent tape was applied for in the United Kingdom and the United States on May 30, 1928. Drew developed a very light adhesive tape that can be pressed and closed, and was later improved and invented the transparent tape. Why can tape stick things? Of course it’s because it’s coated with a layer of adhesive on the surface! The earliest adhesives came from animals and plants. In the 19th century, rubber was the main component of adhesives; in modern times, various polymers are widely used. Adhesives can stick to things because they form bonds between their own molecules and the molecules of the object to be connected. This bond can firmly stick the molecules together. Ingredients of adhesive: There are various polymers according to different brands and types. Insulating tape Insulating tape refers specifically to the tape used by electricians to prevent leakage and provide insulation. Insulating tape has good insulation voltage resistance, flame retardancy, weather resistance and other characteristics, and is suitable for wire connection, electrical insulation protection and other characteristics. Production process: Made of polyvinyl chloride film as the base material and coated with rubber-type pressure-sensitive adhesive. Anti-corrosion tape refers to the adhesive tape used for anti-corrosion wrapping, and is divided into cold-wrapped tape and hot-wrapped tape. Cold-wrapped tape generally includes polyethylene (composite) anti-corrosion tape, polypropylene reinforced fiber anti-corrosion tape, and aluminum foil anti-UV anti-corrosion tape. , Polyethylene 660 (modified asphalt) tape, double-sided tape anti-corrosion inner tape (this tape is rarely used in China, but it is very practical and widely used abroad, and is generally used for export) and epoxy coal pitch anti-corrosion tape. The implementation standards are SY/T0414-98 and SY/T0447-96. Thermal tape is also called radiation cross-linked polyethylene heat shrinkable tape. During use, it needs to be heated to melt the glue before it can be used. It also needs to be supplemented with solvent-free epoxy coating to form a three-layer anti-corrosion structure. The implementation standard is SY /T0413-2002. Shielding tape is a kind of metal foil or conductive cloth with a highly conductive adhesive. Its conductive adhesive and conductive base material form a complete conductor. It can be bonded with any metal surface to complete electrical overlap and electrical sealing of gaps. . Shielding conductive tape is an economical, easy-to-use shielding material. It is used to seal the seams of EMI shielded rooms, shells and electronic equipment, wrap cables for shielding, provide a reliable grounding surface, and provide electrical contact for surfaces that cannot be welded.

Conductive tape Conductive tape is a kind of metal foil or conductive cloth with a highly conductive adhesive. The conductive tape adhesive and conductive base material form a complete conductor. It can be bonded with any metal surface to complete electrical overlaps and gaps. of electrical closure. Shielding conductive tape is an economical, easy-to-use shielding material. It is used to seal the seams of EMI shielded rooms, shells and electronic equipment, wrap cables for shielding, provide a reliable grounding surface, and provide electrical contact for surfaces that cannot be welded. Mala Tape Name: Mala Tape, also known as Silicone Mala Tape, Fire Ox Tape, Mala Tape. Application: Insulation in the electronics industry. Parameters: Generally required thickness is 60±5 microns, peeling force ≥300N/M, elongation at break 55%, breakdown voltage 4.2KV, flame retardant level 0.1, temperature resistance 10-130℃, and strong solvent resistance. Color: Generally there are five distinct colors: red, blue, yellow, white and black. Iron sheet composite tape Working temperature range: --40℃-100℃. Usage: Joints between buildings, bridges, subways, and underground concrete. Features: Waterproof, high bonding strength, high tensile strength, strong adaptability to interface deformation and cracking. It has excellent chemical resistance, weather resistance and corrosion resistance. It does not flow at high temperatures of 80°C and does not crack at low temperatures of 40°C. Polyimide tape Polyimide tape, also known as Kapton tape, is based on polyimide film and uses imported silicone pressure-sensitive adhesive. It has high and low temperature resistance, acid and alkali resistance, solvent resistance, and electrical insulation ( H level), radiation protection and other properties. It is suitable for shielding electronic circuit board wave soldering, protecting golden fingers, high-end electrical insulation, motor insulation, and lithium battery positive and negative and ear fixation. Foam tape Foam tape is made of PE or EVA as the base material, using acrylic oil pressure-sensitive adhesive, and is coated with release paper or release film as the isolation surface. Its performance is: it can fully absorb the gaps of the adherend and eliminate the uneven defects of the adherend, has good buffering properties, has excellent creep resistance, and can withstand loads for a long time. It is widely used in the construction industry and the automotive industry. Edit this section 3M Tape 3M is recognized as the world's number one brand in the tape industry. In 1910, the company moved to its current headquarters in St. Paul, Minnesota, and launched its first exclusive product, Three-M-iteTM abrasive cloth, in 1914. This is where the innovation process begins. In 1921, WetordryTM, the world's first waterproof abrasive sandpaper tape, was born and patented by 3M, ushering in a new era for industrial grinding. In 1924, 3M began formal product research and development. Since then, innovative products such as ScotchTM masking tape, ScotchTM cellophane tape, ScotchTM vinyl electrical insulation tape, and re-fixable diaper tape have been launched. Especially Post-itTM, which was born in 1980, has revolutionized the exchange of information. The emergence of endless innovative products confirms every progress of 3M. Post-itTM, ScotchgardTM, ScotchTM, ThinsulateTM, FiltreteTM, Scotch-BriteTM, NomadTM, DyneonTM, NexcareTM... Various products under well-known brands have been promoted to the world, influencing and changing people's lifestyles and habits. Today, 3M has become a world-famous diversified multinational enterprise, producing and selling more than 60,000 products worldwide. The fields involved include: industry, chemicals, electronics, electrical, communications, transportation, automobiles, aviation, medical care, security, construction, cultural, educational and office, commercial and household consumer goods. The continuous innovation of science and technology brings vigorous development power. Over the past 20 years, 3M has been selected as one of the top ten most admired companies many times. 3M is not only a component of the Dow Jones Industrial Stock Index, but also occupies a place among the 19 world industry leaders selected by the US Fortune magazine in 1997; in 2001, 3M ranked fifth among the 60 most praised well-known companies in the United States. . 3M was named one of the world's top 50 performers by Business Week in 2003, one of the world's 20 most innovative companies in 2005, and was selected as one of the "Most Innovative Companies" by Fortune magazine for two consecutive years. "One of the most admired foreign-invested enterprises in China". In 2003, the 3M brand was included in the "America's Most Powerful Brands" that year. Full of global trust and extraordinary honors, 3M's pace of innovation is even more determined.

Edit this paragraph: How to remove tape residue? Apply water first, and then scrape it off with a small blade. A wonderful way to remove adhesive tape! Friends who drive have all come into contact with stickers, such as many small accessories in the car, transparent tape used for wedding floats, certificates of quality for some accessories, etc. When these things are removed, they often end up in the car or on the car. The surface of the body leaves hard-to-remove sticker traces that cannot be peeled off and cannot be scraped with hard objects. What to do? In practice, the following two methods have been found to be good: alcohol removal method. Use a soft cloth or the like to dip a sufficient amount of 95% alcohol, and then gently wipe the adhesive area. The adhesive will easily soften and come off. At the same time, alcohol will generally not cause any damage to the surface of plastic parts or car paint. But sometimes it is found that alcohol is not very effective for some self-adhesives. At this time, you can use a soft cloth dipped in a little gasoline to gently wipe the self-adhesive area. At this time, you should pay attention because gasoline has a "dissolving" effect on certain plastics or paints. So be sure to use it carefully: either rub it lightly in unimportant places and observe it, and use it if there is no problem; but be careful not to use too much gasoline, and at the same time, keep the time as short as possible! I have tried wiping the car body surface with gasoline for a short time, but it has no obvious effect on the paint film on the car body surface. In this way, the adhesive can be easily removed... It only costs 20 yuan to buy a bottle of adhesive remover. It can be used in many places. It can also be used for a long time. There are ways to remove adhesive tape stains on the door. Use strong tape to stick some decorations on the door, and then remove them. You can see that there are traces of glue left on the door. You can use gasoline or kerosene to wipe off the tape, or you can buy 1200-grade sandpaper and spray water to wipe away the stains. Then buy a can of transparent varnish, dilute it with banana oil, and brush it once to restore the brightness. Do not use nail polish remover to remove glue stains, but unfortunately the door will become a white stain. Tape: first scrape off the tape with a knife, and then wipe it with petroleum spirit; for frosted glass, scrape off the tape and wipe it with turpentine. "Self-Adhesive Trademark Removal Method" Newly purchased stainless steel pots or glassware always have some labels attached to them. After removing the labels, the traces of self-adhesive marks on them are difficult to remove. Wiping with a damp cloth or scraping with a knife will often leave traces. After many times of practice, I have summarized some tips to share with you. For self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover to the surface of the object, and then wipe it gently with a soft cloth; these marks can also be removed with industrial alcohol or gasoline. If the adhesive gets on your skin, you can use lemon juice to remove it. In addition, hand cream can also achieve the effect of removing stickers. Hand cream contains a large amount of water (generally more than 70%), and the water contains a certain amount of surfactants. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of removal. You can also find some similar products such as facial creams, facial cleansers, and detergents that have the same effect. For stubborn stickers on carpets, the best way is to carefully trim away the traces of stickers on the top of the carpet pile.