One pass and three prevention safety slogans

1. Safety must be locked and the enforcement regulations cannot be changed.

2. The personnel chain system is strict and mine safety must be strictly enforced.

3. An integrated solution, on-site work depends on it.

4. Knock the gang, hit the wedge twice, and observe vibration.

5. On the excavation surface of the defense line, the gas monitoring can be done safely.

6. Have broad knowledge of one pass and three defenses, and learn to ensure safety.

7. The upper and lower gums are firmly attached, and the rubber pads are tightly clenched.

8. Pull out the upper shell and hold the lower part firmly.

9. Main fan, local fan and backup fan, powered by multiple power supplies.

10. When blasting the working surface underground, one shot and three inspections will protect us.

11. The underground coal dust should not be too large, which can cause illness or explosion.

12. Underground wind, mine life, and the integrity of facilities must be ensured.

13. The output determined by pumping cannot be changed, and the output determined by wind ensures safety.

14. Remove the protective cover and open the wrench to see it.

15. Ensure water supply to wet your eyes, and cut off the power when evacuating people in front of the artillery.

16. Plan wind and power outages and strictly implement them to avoid any disruption.

17. My mother is concerned about her son when he goes into the well, and is afraid when something breaks the rules.

18. Explore first and then dig out the plan, and use digging instead of exploring big hidden dangers.

19. Measure the gas first and then send power. The main fan should send air in front.

20. Dual fans and dual power supplies, the fans automatically switch between each other.

21. Anti-wind drills must be carried out, and old empty gas must be strictly supervised.

22. If there are signs of a flood, stop working and report it quickly.

23. Fire causes serious harm, property damage and human life.

24. Explosive device, water cannon and clay, one shot and three inspections are the prerequisite.

25. When hanging cables and wires, do not use iron wires for safety.

26. Mouthpiece, you should know that it should be placed between the lips and teeth.

27. If the nozzle is not blocked, the water pressure is high, and effective atomization depends on it.

28. To plug blastholes, use sealing mud. Never use pulverized coal to plug holes.

29. Safety debt harms everyone, and accidents cause huge losses.

30. Security inspection and tile inspection and outburst prevention personnel, strictly guard against gas.

31. Small gas can cause great harm, and the four major hazards are all terrible.

32. Inject water into layers, wet holes, and flush alleys to ensure safety.

33. The rock swells, the mine pressure is high, and the roof collapses and becomes a support.

34. The working surface becomes wet, with water dripping from the roof and coal bottom drum.

35. On the working surface, prevent over-limits. Work beyond the limits is considered reckless.

36. Safety measures must be completed before tunnel excavation.

37. Do not throw away waste engine oil, rags, and flammable items.

38. When starting construction, accepting acceptance, suspending production and resuming production, we must be proactive in preventing and controlling hidden dangers.

39. Ensure ventilation is reliably closed and the ventilation system must be perfect.

40. Grasp the headband can and open the nose clip to proceed.

41. Lift the wrench with your thumb and pull open the sealing strip.

42. Emission gas must be strictly controlled and must be divided into sections when the concentration is high.

43. At the excavation head, there is local wind, and special personnel will manage it everywhere.

44. Excavation holes must be drilled first to prevent outburst coal and rock gas exploration.

45. Exploring and releasing water to prevent disasters and strengthen support to avoid disasters.

46. To increase production, ensure safety first, upgrade equipment and then increase production.

47. Oil-free and explosion-proof switches are good, and all equipment must be flame-retardant.

48. Open wire joints are a big hidden danger, and electric welding underground is strictly prohibited.

49. Finally, take off the miner’s hat and quickly put on the headband cover.

50. The machine head produces large amounts of coal dust, so spray water to eliminate it.

51. Mechanical and electrical explosion protection is the most critical and cannot be changed during power outage maintenance.

52. The inside and outside of the unit and the bracket are good for coal mining and coal discharge spraying.

53. Chavas, look at the signals and remember the disaster evacuation route.

54. Check the gas at the location. Do not be lazy when checking three times in one shift.

55. The sound of water, the sweat of coal, and the harmful smell of rotten eggs.

56. Water cannon mud, spraying water, dust-proof facilities cannot be destroyed.

57. After reporting, if the situation is urgent, evacuate the scene immediately.

58. Pay attention to the mining working surface, and the distance cannot be changed by 100 meters.

59. There are signs of gas gushing, both silent and loud, so keep them in mind.

60. If the fire is strong, don’t panic. Wear a self-rescuer and leave the scene.

61. If the fire is small, don’t run away, and master the knowledge of fire extinguishing.

62. When a fire begins, put out the fire quickly and have enough fire extinguishing equipment.

63. Explosives explode with flames. Improper precautions are the most dangerous.

64. Coal dust explosions are the most terrifying, and mine damage can cause serious damage to lives.

65. Coal dust and gas brothers, gas detonated coal dust explosion.

66. The gas accident is so terrible that it ranks among the five major disasters.

67. Gas accidents can be avoided by pumping them out first and removing the danger later.

68. When gas anomalies are discovered, organize the evacuation of security personnel.

69. Although gas drainage is difficult, waste can be used to turn energy.

70. To ensure the safety of gas probes, it is stipulated that the suspension cannot be changed.

71. The lifeline of the gas probe is only safe if it is used correctly.

72. Gas explosions and coal dust explosions will cause further harm.

73. Gas outbursts and explosions caused many deaths and injuries and the tunnel collapsed.

74. Gas exceeding the limit is too dangerous. Establish a new concept of accidents.

75. If gas exceeds the limit and evacuates personnel, the maximum limit must be controlled.

76. Gas is too high, it is forbidden to charge powder, and it is strictly forbidden to use open flames or open bolts.

77. Don’t be slippery when it comes to gas prevention and control. Even if there is no accident, there will be heavy fines.

78. The tile inspection equipment is very important. Check it frequently to eliminate hidden dangers.

79. If there is an explosion, it is caused by sparks. Do not dismantle the underground miner's lamp.

80. Using an electric stove or an open flame is tantamount to murder and arson.

81. Tighten the bolts on the outer cover of electrical appliances to prevent them.

82. Seals for electrical equipment must be installed to eliminate danger.

83. Electric welding requires approval. Working without permission is murder.

84. Take good care of the monitor. If you damage the equipment, you will go to jail.

85. Monitor, monitor and supervise, and manage scientifically and carefully.

86. It is strictly forbidden to use open knives and brakes, and it is strictly forbidden to repair electrical appliances with electricity.

87. No open flames, no explosions, no smoking underground.

88. The standard of Wotou air ducts is strict, and the prescribed spacing is strictly enforced.

89. Flying dust is very dangerous, so spray water to remove dust.

90. Modernization of fully mechanized mining and efficient dust removal and water atomization.

91. Use the self-rescuer well to save your life in the event of an accident.

92. Rules and regulations are hung on the wall and are truly implemented without adulteration.

93. Wind detectors have great responsibilities and must carry out inspections every ten days.

94. Close the air door easily to prevent short circuits is the key.

95. Be aware of the wind and run away with your life with a clear head.

96. If the air inlet and outlet door is easily closed, there is a big risk of air flow short circuit.

97. If there is a power outage on the working surface, evacuate immediately to avoid danger.

98. Wear your helmet again, walk at a constant speed and do not run.

99. When drilling, if something unusual happens, do not release the water without permission.

100. Fire prevention is a heavy task, and light bulb heating is prohibited.

101. To prevent explosions, breakthroughs and spontaneous combustion, gas prevention and control must take priority.

102. To prevent gas, you must keep in mind the safety regulations.

103. Anti-gas and anti-toxic gas, ensuring safety depends on the fan.

104. Prevent accumulation, prevent fire sources, prevent explosions and ensure safety.

105. Everyone should take precautions against gas and prevent and treat it comprehensively and meticulously.

106. Get rid of the old concept of sheep’s tail and avoid strict supervision of chicken’s feet.

107. The responsibility for closing hidden dangers is great, and the implementation should be checked on site.

108. Explosion-proof facilities are fully equipped to prevent the spread of gas accidents.

109. When the roof falls, it can be predicted. Ensure safety before working.

110. The roof frame may be noisy, the wall panels may be damaged, and roof accidents must be constantly guarded against.

111. There is a lot of dust in the windy lanes. It is a good idea to flush the lanes.

112. A hole in the hairdryer is a hidden danger, so it is not a bother to repair it in time.

113. If the air volume is small, please report it so that it can be repaired in time.

114. Breathe in oxygen immediately and know how to breathe evenly.

115. The nose clip spring is open, and the nose wings should be clipped properly.