Forest fire prevention knowledge

1. What does "forest fire prevention" mean?

Answer: It refers to the prevention and fighting of forest, forest and woodland fires.

2. What principles should be followed in forest fire fighting?

Answer: Forest fire fighting work follows the principle of mobilizing the masses and combining professional teams. All units in forest areas should establish mass fire-fighting teams and pay attention to strengthening training and improving quality; state-owned forest farms must also organize professional fire-fighting teams.

3. During the forest fire prevention period, what are the regulations on the use of fire in forest areas?

Answer: During the forest fire prevention period. It is prohibited to use wild fire in forest areas; if fire is needed due to special circumstances, strict approval procedures must be applied and a wild fire license must be obtained.

4. Approved fire-using units and individuals must comply with the "five no-burns" rule when using fire. What does this mean?

Answer: Do not burn if the fire prevention road is not up to standard; do not burn if fire prevention personnel and fire extinguishing tools are not in place; do not burn if the weather is dry and windy level 3 or above; do not burn if the mountain fire is going up; do not burn if the weather is level 4 (including level 4) or above Don't burn.

5. What do you mean by the "five don'ts" when entering the forest area?

Answer: It is not allowed to litter cigarette butts and matchsticks in the forest area; it is not allowed to set off firecrackers and fireworks in the forest area; it is not allowed to burn fires in the forest area to drive away animals; it is not allowed to light fires in the forest area Heating and grilling food; playing with fire for fun in the forest area is not allowed.

6. How are forest fire danger levels divided?

Answer: The forest fire danger level is divided into five levels. Level 1 means fires can be used in weather that is difficult to burn; Level 2 means weather that is not easy to burn, and fires can be used, but there is a possibility of fire; Level 3 means weather that can burn, and fires must be controlled; Level 4 means high temperatures that are easy to burn. In fire danger weather, the use of fire should be stopped in forest areas; Level 5 is the highest level of extremely flammable fire danger weather, and all use of fire inside and outside is strictly prohibited.

7. What is the forest fire prevention period? When is the forest fire prevention period in our province?

Answer: Generally, the seasons when forests are prone to fires are designated as forest fire prevention periods. According to climate characteristics and the occurrence pattern of forest fires, Zhejiang Province has designated November 1st of each year to April 30th of the following year as the forest fire prevention period.

8. Who cannot be organized to fight forest fires on the mountain?

Answer: The elderly, women, primary and secondary school students, children and the physically disabled.

9. What three conditions must be met for forest burning?

Answer: Combustibles, oxygen and a certain temperature.

10. What are the combustible materials in the forest?

Answer: Trees, shrubs, weeds, ferns, mosses, lichens, dead trees, decayed wood, fallen leaves in the forest, as well as humus and peat in the underground layer, are all combustible materials.

11. What are the main factors that cause forest fires?

Answer: When combustible materials and weather conditions are conducive to forest burning, the fire source is the main factor in the occurrence of forest fires.

12. What three categories can forest fires be divided into based on their burning locations, spreading speed and degree of damage?

Answer: It can be divided into three categories: surface fire, crown fire and underground fire.

13. What is surface fire? How harmful are surface fires to forests?

Answer: Surface fire, also called ground fire, refers to a fire that spreads along the forest floor and burns the ground cover. Surface fire can burn seedlings, saplings, and shrubs 1.5 meters below the surface, burn the bark surface at the base of tree trunks, and root systems close to the ground. Damage to forest trees can weaken their growth, easily lead to the occurrence of a large number of pests and diseases, seriously affect the growth of forest trees, cause the wood material to deteriorate, and sometimes even cause large areas of forest to die.

14. What is a crown fire? How harmful are crown fires to forests?

Answer: When a surface fire encounters strong winds or a group of coniferous saplings, dead trees or low-hanging branches, the flames burn to the upper part of the tree crown and rapidly expand along the downwind, becoming a crown fire. Crown fires often occur at the same time as surface fires, burning the crown of the entire forest surface. They are very destructive to the forest and are difficult to put out. When encountering such a fire, generally do not fight, but use isolation tape.

15. What are the topographic factors that affect forest fires?

Answer: There are aspect, slope and altitude, etc.

16. What is "fire fighting"? What is "sitting on fire"?

Answer: Forest fires spread from the bottom of the mountain to the mountains very quickly, which is called "rush fire". The fire spreads slowly from the mountain to the bottom, which is called "sitting fire".

17. What are the characteristics of mountain forest fires?

Answer: In mountainous conditions, when fighting a fire, especially on a sunny slope, the fire is violent and spreads rapidly, making it difficult to put out the fire; sitting on the fire. Its fire intensity is weak, which is helpful for putting out fires.

18. What are the principles for fighting forest fires?

Answer: Once a forest fire occurs, we must follow the principle of "fight early, fight small, and fight" to race against time to eliminate the forest fire in its initial stage.

19. What are the two ways to put out a fire?

Answer: Forest fires are generally put out using a combination of direct fire extinguishing and isolation zone fire extinguishing. The method often used for direct fire extinguishing is to use the tools in hand to extinguish the fire directly along the fire line. The indirect fire extinguishing method is used when there is a violent surface fire or crown fire that cannot be attacked by manpower. The purpose of extinguishing the fire is to cut off the fire source by cutting the fire path.

20. What are the basic tips for fighting wildfires?

Answer: When fighting a mountain fire, you should stand with two feet inside the edge of the burned area and the other foot outside the edge. When using the fire extinguishing tool, you should hit the burned area diagonally inward at a 40-60 degree angle. angle.

When slapping, do it one at a time and do not slap it straight up or down to avoid splashing sparks and expanding the burning point. When tapping, hit hard and lift lightly, hit quickly and lift slowly, and advance as you hit.

When the fire is weak, one person can fight it alone. When the fire is strong, it is necessary to organize a group of several people to fight a little at the same time, rise and fall at the same time, and move forward together after extinguishing the fire.

When extinguishing a fire, you must fight section by section along the fire line. You must never leave the fire line to fight internal fires, and you must not run in front of the fire beacon to block or fight, especially when fighting grass pond fires and headwind fires. Pay more attention to safety.

21. How to put out a forest fire without causing casualties?

Answer: When fighting a fire line, it is strictly prohibited to fight against the head of the fire; do not fight in the downwind; do not fight in front of the fire line; when fighting a downhill mountain fire, pay attention to the downhill fire turning into an uphill fire when the wind direction changes to prevent being swept up by the fire. Into burns. When cleaning up a fire scene, pay attention to scorched and tilted "trees hanging", fallen trees that suddenly fall and injure people, especially to prevent falling into "fire pits" and causing burns.

22. What administrative penalties should be imposed on those who disobey the instructions of the fire-fighting command agency or delay fire-fighting opportunities that affect fire-fighting and disaster relief?

Answer: Anyone who commits the above acts will be fined from 50 to 100 yuan or given a warning.

23. How to conduct a forest fire investigation?

Answer: After a forest fire occurs, the local people's government or the forest fire prevention headquarters should promptly organize relevant departments to investigate the time and location of the fire. , causes, perpetrators, affected forest area and accumulation, firefighting conditions, material consumption, other economic losses, personal casualties and impacts on the natural ecological environment will be investigated and recorded in files.

24. How to pay for fire-fighting expenses?

Answer: (1) The salary and travel expenses of individuals during the period of fighting forest fires shall be paid by their units; (2) During the period of fire-fighting Other expenses consumed shall be paid by the unit causing the fire; if the cause of the fire is unclear, the management unit of the forest land where the fire occurred shall pay; if there is no unit causing the accident or the management unit of the forest land where the fire occurred is unable to pay, the people's government of the mountain guarding land shall pay.

25. What are the regulations for those who participate in forest fire fighting?

Answer: Any unit or individual who receives an order to fight a forest fire must rush to the designated location within a limited time. , make a save. It is strictly prohibited to organize and mobilize minors, pregnant women, and disabled people to participate in forest fire fighting.

26. How to distinguish between forest fire and fire?

Answer: Forest fire: the area of ??the affected forest is less than one hectare or other forest fires; general forest fire: the area of ??the affected forest is within More than one hectare but less than 100 hectares; major forest fire: the affected forest area is more than 100 hectares but less than 1,000 hectares; extremely large forest fire: the affected forest area is more than 1,000 hectares.

27. What are the common personal injury accidents during fire fighting?

Answer: (1) Direct burns by fire. It mainly occurs when fire fighters are in danger and have no time to evacuate. Judging from experimental data, when the temperature of fire reaches 800-1000~C, humans can only survive for 7.5 seconds to 18 seconds.

(2) Suffocation casualties.

One is coma or death due to carbon monoxide poisoning. When the carbon monoxide content in the air reaches more than 1%, a weak person will die in 1 minute, and a strong person will die in 2 minutes. The second is that in front of the fire, after inhaling high-temperature airflow, edema occurs in the throat and blocks the trachea, causing death.

(3) Falling and falling to death. Mainly due to injuries caused by broken wood and rolling stones while fighting fires, or injuries caused by falling off cliffs and falling to death.

(4) Injury or death due to violation of operating procedures. When fighting a fire, when using tools such as shovels and rakes, they do not keep a certain distance and collide with each other, or improper use of fire extinguishing bombs may cause personal injury.

28. How to control productive fire sources?

Answer: Productive fire sources include burning wasteland, burning for reclamation, blasting and quarrying and other fires. To control these fire sources, the main thing is to strictly implement the approval and formulation of wild productive fire use. During the key period of forest fire prevention, the use of productive fire is strictly controlled. All units or individuals that need to use fire for production must obtain approval from the local government or forest fire prevention office according to the prescribed authority, and strictly abide by the "six no-burn" regulations, that is, the leader is not present Don’t burn; don’t burn if there is no rain for a long time; don’t burn if there is wind above Level 3; don’t burn if the fire lines are not opened; don’t burn if the fire-fighting personnel are not organized; don’t burn if the fire-fighting tools are not prepared.

29. What is the policy of forest fire prevention in my country?

Answer: The policy of forest fire prevention in my country is "prevention first, active elimination". Prevention is the prerequisite and key to forest fire prevention, while elimination is a passive means and a rescue measure. Only by doing a good job in preventing fires can there be no or fewer fires. Once a fire occurs, active measures must be taken to extinguish it. Therefore, in various measures for forest fire prevention, we must focus on both hands at the same time, one for prevention and the other for firefighting. Both hands must be strong.

30. What are the strategies for fighting forest fires?

Answer: (1) Divide strategic fire-fighting zones. According to different fire threat levels, primary and secondary fire extinguishing zones are divided. With five natural and man-made fire barriers near the fire site, the fire can spread freely. This is the main strategic area for fire extinguishing. There are natural and artificial fire barriers outside the boundary of the fire scene. The fire will not easily expand. When the fire spreads to the fire barriers, the fire will naturally extinguish. This is the secondary area for fire fighting. First put out the fire in the main area, and then focus on extinguishing the fire in the secondary area.

(2) Control the spread of fire first, and then extinguish the remaining fire.

(3) Combination of attack and defense, focusing on attack. In the case of a relatively severe fire, a fire break line should be set up at an appropriate place in the main direction of the fire development, and the fire wings should be struck to prevent the fire from spreading.

(4) Concentrate superior forces to fight a war of annihilation. The intensity of the fire is constantly changing. The fire-fighting commander must look at the overall situation, focus on defense at key parts, and focus on guarding dangerous areas. Seize the favorable opportunity to put out the fire, concentrate on the superior force to put out the fire, and eliminate the fire in one fell swoop.

(5) Sacrifice the local part and save the overall situation. In order to better protect forest resources and the safety of people's lives and property, it is necessary to take measures to sacrifice local areas and protect the overall situation when the fire is fierce and manpower is insufficient. The key points and order of protection are: people before things, key forest areas before general forest areas; if fire threatens forests and historical relics, the cultural relics should be protected before the forest.

(6) Safety first. Fighting a fire is a hard job, and intense actions often lead to mistakes and accidents in the midst of chaos. When fighting a fire, especially on a windy day, you should always pay attention to the changes in the fire to avoid being trapped by the fire and causing personal casualties. In the process of large-scale fires and long fire-fighting times, commanders at all levels must put safety first, impose strict requirements and disciplines, and ensure safe fire-fighting.

What are the three ways to extinguish forest fires

The first is to dissipate heat and cool down, so that the temperature of burning combustibles drops below the ignition point and is extinguished. The main method is to spray combustible materials with cold water to absorb heat. , lower the temperature, cool down to below the ignition point and extinguish; covering the burning material with wet soil can also achieve the cooling effect.

The second is to isolate the heat source (fire source), isolate burning combustibles from unburned combustibles, destroy the conduction of fire, and achieve the purpose of extinguishing the fire. In order to cut off the heat source (fire source), methods such as opening fire lines and fire trenches, building fire walls, setting up fire prevention belts, and spraying chemical fire extinguishing agents are usually used to achieve the purpose of isolating the heat source (fire source).

The third is to cut off or reduce the oxygen needed for forest burning, causing it to suffocate and extinguish.

Mainly using fire extinguishing tools to directly extinguish the fire, covering the fire with sand and soil, and using chemicals to dilute the oxygen required for combustion will cause the combustibles to be temporarily isolated from the air and suffocated. This method is only suitable for initial fires. When the fire spreads, the space that needs to be isolated is too large, requires a lot of work, and has poor effect.

What are the self-rescue methods for escaping danger

The first is to retreat into the safe zone. When fighting a fire, the fire fighting team (group) should observe changes in the fire scene. In case of flying fires and cyclones, organize fire fighting personnel to enter areas with burnt areas, less vegetation, and low flames. The second is to ignite the fire according to the regulations and save yourself. It is necessary to unite the command, choose a relatively flat place, light the fire downwind while lighting the fire on both sides, and follow the direction of the fire head, and enter the fire mark caused by self-rescue to avoid the fire. The third is to stay safe according to regulations. When danger occurs, you should choose a nearby place with little vegetation and lie down with your feet facing the direction of the fire. Scrape away the floating soil until you see wet soil. Put your face into the small pit, wrap your head with clothes, and put your hands in front of your body. . The fourth is to break out into the wind according to regulations. When the wind direction changes suddenly and the fire turns around, the commander must decisively issue a breakout order, and the team members themselves must make a prompt decision, choose a place with smaller and less grass, wrap their heads with clothes, hold their breath, and face the fire fiercely. A person should be able to break through within 7.5 seconds. You must never race against fire, you can only rush against it.

How to strengthen safety measures when fighting fire

First, assign comrades with fire fighting experience to serve as frontline commanders.

The second is the temporary organization of fire-fighting personnel, who must designate section and team leaders.

The third is to clarify fire fighting disciplines and safety matters.

The fourth is to check whether fire-fighting supplies meet the requirements. Fire-fighting clothing is very loose and flame-retardant.

The fifth is to strengthen fire reconnaissance and organize fire scene communications, rescue and logistical support.

Sixth is to select advance and retreat routes and safety zones.

Seventh, enter the fire from the tail and fight along the two wings of the fire.

Eighth, do not start a fire directly into the wind, do not start a fire on a mountain, do not start a fire on cliffs, steep slopes and broken terrain, do not put out fires directly in windy weather or strong fire conditions, and do not put out fires directly on combustibles. Fight fire in dense areas.

Ninth, use fire extinguishing equipment correctly.

What are the characteristics of the spread of mountain forest fires

(1) Three types of fires (surface fires, crown fires and underground fires) develop comprehensively. Generally, coniferous forests are prone to crown fires, and broadleaf forests are prone to surface fires. There are fewer simple forest fires. The useful herbaceous layer is dry, dense and continuous, so surface fires develop extremely quickly, especially in logging areas, where the fire intensity is stronger. Simple surface fires burning from the herbaceous layer have narrow firewalls, usually 5-8 meters wide. Surface fires burning together with grass and understory wood are relatively violent, and the width of the fire wall can be more than 15 meters, making it difficult to extinguish, resulting in a large fire area. The branches and leaves of the coniferous forest are rich in oil, and the branches are naturally poorly pruned. The lower branches are close to the ground. Under the baking of surface fire, it is easy to cause crown fire. It usually occurs within 15-30 minutes after the surface fire. Although its advancement speed is slow, However, the fire was so intense that it caused a heat wave in the surrounding air, making it difficult to approach.

(2) The spread of forest fires is mainly controlled by valley winds and is intermittent. The wind force in the alpine canyons mainly comes from mountain breezes and valley breezes, which can accelerate the upward spread of fire. In sunny weather, there is usually a phenomenon of valley wind. The valley breeze occurs around 10 a.m., gradually intensifies, and reaches its maximum after 3 p.m. The valley wind has a gusty nature, and under its control, wildfires also have peak, middle and waning phases in a day. The general decay period is mainly between 4:00 and 10:00 in the morning. Surface fires stop developing and crown fires turn into crown fires. Some crown fires burn off the branches and leaves, and the flames automatically extinguish. Most areas in the fire scene are basically flameless. The burning state is the best time to put out the fire. As the saying goes, wildfires don't last overnight. If the fire the day before is not extinguished by 10 a.m. the next day, be prepared for a vicious battle. It appears twice during the peak period, between 15-17 pm and 20-22 pm. Surface fires and crown fires develop rapidly, the fire temperature is high, the wind direction changes, the personnel are tired, and the command is difficult. In addition, the valley wind in the main ditch can control the valley wind in the branch ditch. Therefore, wildfires that occur in the main gully tend to develop toward the branch ravines, while wildfires that occur in the branch ravines are less likely to develop toward the main ravine. In addition, valley wind is also affected by the macroclimate, and its effect on mountain fires has diurnal variations.

The horizontal direction of fire spread and development is also affected by valley winds.

When the valley wind is strong, the fire often spreads in the upstream area of ??the fire field; when the mountain wind is strong, the fire often spreads in the downstream area of ??the fire field.

(3) The spread of fire is affected by terrain factors. Topographic changes restrict the spread of fire to a great extent, and the role of plant type is not obvious. Natural termination of combustion often occurs on major mountain turnings (mainly major slope changes), narrow valleys and ridges. At large mountain turning points, due to the effect of anti-mountain airflow, when the uphill fire reaches the top of the mountain, the fire often declines and stops developing. The wind speed in the narrow valley area is accelerated, and the fire is usually temporarily stopped at the point where the flow is diverted or upward due to the "canyon effect".

Secondly, the fire spreading from the foot of the mountain to the top of the mountain is affected by the small terrain of gentle slopes, small flats, steep slopes and cliffs. Because the valley breeze will form small vortices when passing through various small terrains, which can hinder the spread of fire. Fires on gentle slopes and steep slopes spread quickly and are difficult to put out. However, the spread speed on mountain cols and small flats slows down, which is a good time to put out fires in high mountain areas.

(4) Mountain forest fires are three-dimensional in nature and often develop in leaps and bounds. The mountains are high and the valleys are narrow, so forest fires occupy a large vertical space. In addition to horizontal movement, it also has the characteristics of leapfrog development. The distance of currency friction jump is usually within 500 meters. The cause of jumping burning is that after the cones or twigs are burned, they are blown to high altitudes by the wind and then fall to the distance. At this time, under the action of heat waves around the fire, the air and forest land are further dried, and the temperature rises. Once there is fire, , immediately caught fire.

(5) It is repetitive. The spread of forest fires often occurs repeatedly. Although forest fires have a general spread pattern, they are more prominent in mountainous forest areas. The main reason is that the remaining fire is hidden, and there is no fire or smoke on the ground, which makes people alert. When a fire suddenly breaks out, even if there are people on site to monitor and defend, they will be caught off guard, especially at the edge of the fire scene. Secondly, it may be the natural problem of residual fire. Humus produces flammable gas under the action of high temperature. Once combined with oxygen in the outside air, spontaneous combustion occurs. Therefore, we must pay great attention to the hidden residual fire. We must not only judge it from the aspects of smoke and temperature, but also repeatedly dig out ways to irrigate it with water to prevent it from recurring.

What are the commonly used fire fighting tactics

(1) "Single point breakthrough, long-term assault" tactics. The fire-fighting team broke into the line of fire from a certain location, divided the troops into two groups, conducted one-point and two-sided operations, and finally encircled the area. The key to this tactic is to select the breakthrough point. Generally, the flank close to the main fire head is selected to break in. The side with stronger fire will deploy a large number of troops, and the side with weaker fire will deploy a small amount of troops. The characteristics of this tactic are: there are few breakthrough points, it is used when there is only one fire-fighting team to continuously attack the fire, and the possibility of sudden changes in the fire intensity is small. However, due to the limited capabilities of the fire-fighting team, it is not suitable to be used in large fire scenes.

(2) Breakthrough at multiple points, split attack and encirclement tactics. This is a practical tactic for quickly segmenting fires. During implementation, several fire-fighting teams (groups) select two or more breakthrough points, and then conduct "one point and two sides" operations respectively. Each breakthrough point forms a split attack and encirclement situation with each other, dividing the entire fire scene into several sections, and dividing the fire. Put out quickly. The characteristics of this tactic are: many breakthrough points, large use of troops, full-scale deployment, short front lines between each fire-fighting team (group), and high fire-fighting efficiency. It is a commonly used tactic for fire-fighting teams.

(3) Surrounded on all sides and full-line assault tactics. This tactic is a practical tactic for fighting an initial fire or a small-area fire with sufficient troops. The main thing is to put out the fire by using troops on all fronts and encircling and annihilating them on all sides. This method not only puts out the fire, but also takes into account the overall situation and puts out the fire in one go. The side with strong spread has more troops than the weaker side, the downwind fire has more troops than the headwind fire and crosswind fire, and the uphill fire has more troops than downwind fire.

(4) One attack, full control of tactics. In this case, all troops will be deployed on one or both sides of the fire line, and a fire suppression level will be used to attack the open fire with all their strength. The remaining fire will not be cleared for the time being, and the follow-up troops and the fire scene cleaning team will not be left behind, striving to eliminate the open fire in a short period of time. To control the fire situation, and then organize to extinguish the remaining fire. The distance of "one impact" is generally 400-500 meters on barren slopes, 150-200 meters on dangerous areas, and about 500 meters on wooded areas. This tactic is mostly used when fire threatens residential areas and important facilities, posing a huge threat to the safety of the country and people's lives and property.

Forest fire prevention slogans

Cherish the forest and prevent fire before it "burns".

Fire prevention depends on you, me and everyone, everyone is responsible;

To put out fires, start early and finish early, and everything will be safe.

Forest resources are the common wealth of the whole society,

Forest fire prevention is the common responsibility of the whole society.

Being in the green sea, keep fire prevention in mind.

With collective efforts and prevention, forest fire prevention is powerful;

With strict inspection and strict management, forest safety is guaranteed.

Develop forestry in step with the times and manage forests according to law and prevent fires.

When vegetation dries out in winter and spring, fire prevention must be the priority.

The forest is the cradle of life, and fire is the killer of the forest.

One big tree can make tens of millions of matches,

One match can destroy tens of millions of big trees.

Forests grow for decades, but fires burn them down in an instant.

After all the hard work to afforestation, don’t burn it all in one fire.

A cigarette butt can destroy thousands of acres of forest,

Half a stick of incense can burn up thousands of acres of green land.

It takes ten years to plant trees and it is difficult to establish a forest, and all the efforts will be lost in the face of a mountain fire.

The branches and leaves that flourished for more than a hundred years were reduced to ashes in an instant.

Behind the flames is the desert.

Thousands of miles long embankment collapsed in an ant nest, and thousands of hectares of forest were destroyed by cigarette butts.

Thousands of miles long embankments collapsed in ant nests; thousands of hectares of forest were destroyed by sparks of fire.

The trees have worked hard for ten years, but once there is a fire, all the efforts will be lost.

A glass of wine is the prelude to a car accident,

A cigarette butt is the prelude to a fire.

The small cigarette butt is not big, it swallows the forest landscape.

When the green shade lasts for a long time, a spark of fire ignites the prairie fire in an instant.

Fire can bring light, but it can also sweep away civilization.

It takes ten years for a tree to become useful. A match can destroy a tree in an instant.

Pieces of green leaves merge into vast oasis, and a single spark can destroy the forest sea.

Returning farmland to forest is a good national policy, adding green to the beautiful China;

If it catches fire carelessly, it will destroy the industry of thousands of generations.

It takes ten years to grow a tree, but a spark can destroy ten thousand acres of forest.

Ten thousand people are not enough to prevent fire, but one person's negligence can lead to big disaster.

A moment of neglect will cause fire to spread; a moment of vigilance will make the trees evergreen.

Ten years of tree growth will take a hundred years to form a forest;

A fire will turn everything into nothing. .

A little cigarette butt fire can destroy ten thousand acres of forest.

Forest fire prevention is very harmful, harming others and harming ourselves and the country.

Forest, the origin of life; fire, the end of forest.

A single spark can destroy ten thousand acres of forest.

The green trees provide shade and the scenery is beautiful; the good wood turns to ashes and the heart aches.

Be diligent in fire prevention and the country will be prosperous and the people will be safe; neglecting fire prevention will inevitably lead to consequences.

If you ignore the sparks for a moment, the fire will spread thousands of miles away.

The forest is like a treasure, with resources and wealth hidden inside;

If fire prevention is not a priority, the rich soil will become poor.

Planting trees and grass without preventing fire will be a waste of work year after year.

Give the trees a little care and give the earth a green shade.

Fire is the enemy of the forest, keep the source of fire away from the forest.

Small cigarette butts are very harmful, and trees are scared when they see them.

Keep fire prevention awareness in mind, and it is up to everyone to protect the forest.

If you use fire carefully, you will benefit your descendants; if you use fire carelessly, you will regret it for life.

The towering trees have been growing for decades, and a wisp of smoke rises to the west.

A moment of negligence that causes a wildfire will lead to lifelong regret and blame.

Everyone has fire prevention awareness, and a green home will last forever.

Plums, orchids, pines and bamboos are all friends, so take care of them;

Wildfire cigarettes, every bit is an enemy, don't light them.

Protect the forest and leave quickly.

The forest needs all kinds of care from you,

But don't give her "fiery" love!

The vegetation is intentional, but the fire is ruthless.

A small ant can destroy a towering embankment,

A single spark can burn down a vast forest.

The spark of love is the sweetest, and the spark of the forest is the most ruthless.

Thousands of acres of forest and ten thousand acres of forest, ignoring fire prevention is equal to zero.