Specification requirements for elevator shaft protection

There are quite a few requirements in the protection code of elevator shaft. First of all, you should say that every elevator shaft must take protective measures for the entrance position during construction, which should be beyond doubt. But fixed gates and guardrails can be used inside, and the height should be controlled between 1.5- 1.8 meters. Secondly, warning signs should be placed at the elevator wellhead, and even a red light should be set at the elevator wellhead as a warning, so that it can be seen at night. That is, when the elevator wellhead position is removed or changed, measures should be taken according to the signature process of the special department and the person in charge, and all the people present should be informed at the same time. The requirements of the protection code in the elevator shaft are that the elevator shaft must be equipped with very good quality protection measures, and the workers must wear safety helmets and safety belts during construction to avoid accidents during construction. The elevator must be equipped with protective doors, and the height of the protective doors has certain requirements. The height should be above 1.5m. If it is lower than1.5m, it will be difficult to do maintenance work. Safety nets should be hung every two floors in the shaft. During the elevator shaft construction, warning signs should be placed at the wellhead. If it is at night, it must be set at the wellhead.