How to write the job content of an airport security inspector?

1. What does airport security do? 2. The specific work of airport security. 3. What do airport security inspectors do when they get older? Let’s take a look at it below. 4. What do airport security inspectors do? Work

1. The security inspection department should formulate corresponding service plans and emergency response plans based on the workload and actual conditions, and organize their implementation to prevent missed inspections, out-of-control and other incidents from occurring. Under special circumstances, with the approval of the Public Security Bureau of the Civil Aviation Administration of China or its authorized department, a special work plan may be implemented to conduct strict safety inspections. The special work plan will be formulated separately by the Public Security Bureau of the Civil Aviation Administration of China.

2. Domestic flight passengers should check their valid flight identification documents, tickets and boarding passes. The types of valid passenger identification documents include: resident ID card, temporary ID card, military officer ID card, armed police officer ID card, soldier ID card, military cadet ID card, military civilian cadre ID card, retired military cadre ID card and military employee ID card for Chinese passengers. , travel documents for residents of Australia and Taiwan compatriots;

Passports, travel documents, diplomat certificates, etc. for foreign passengers; other valid flight identification documents from the Civil Aviation Administration of China. Minors under the age of 16 can be released with their student ID card, household registration booklet or identity certificate issued by the public security authority in the place where their household registration is located.

3. For passengers whose verification is correct, a verification stamp should be stamped on their boarding pass.

4. When conducting security checks on passengers, security personnel should guide passengers through the security gates one by one.

5. Passengers whose security gate alarms when passing through should be repeatedly inspected or re-examined using a hand-held metal detector or manual physical inspection, and doubtful points can be eliminated before release. Manual personal inspections should generally be conducted by security personnel of the same gender; when inspecting female passengers, they must be conducted by female security personnel.

6. Passengers who still have doubts after manual personal inspection can be taken to the security inspection room for strict inspection with the approval of the leader on duty of the security inspection department. The inspection should be carried out by more than two security personnel of the same gender. implementation.

7. Both checked and unchecked baggage of passengers must be inspected by security inspection equipment. When suspicious items are found, they should be opened (package inspection), and random inspections can be made at any time if necessary. When unpacking (package inspection), the shipper or carrier of the suspicious items should be present.

8. Passengers declare the items they carry If it is not suitable to be subject to public inspection, the security inspection department may inspect it on appropriate occasions based on the actual situation.

9. Air cargo should be subject to security inspection or storage for 24 hours, or other security measures approved by the Civil Aviation Administration of China should be adopted. Measures.

Extended information

Prohibited items

1. Firearms, military or police equipment (including major parts, including: military guns, official Guns: pistols, rifles, submachine guns, machine guns, riot guns, etc. Civilian guns: air guns, shotguns, sports guns, anesthetic injection guns, starter guns, etc.

Other guns: sample guns, props, etc. Police equipment: batons, military or police daggers, bayonets, etc. Firearms and equipment prohibited by the state: steel ball guns, tear gas guns, stun guns, stun guns, defensive devices, etc.

2. Explosive items, including: ammunition: bombs, grenades, illumination bombs, incendiary bombs, smoke bombs, signal bombs, tear gas bombs, gas bombs and bullets (blank bombs, combat bombs, test bombs, training bombs, etc.) Explosive equipment: explosives, Detonators, fuses, detonating cords, non-electrical detonation systems, blasting agents, etc. Pyrotechnic products: fireworks, fireworks, firecrackers, etc.

3. Controlled knives: refers to 1983. The knives listed in the "Interim Provisions on the Control of Some Knives" promulgated and implemented by the Ministry of Public Security with the approval of the State Council, include daggers, triangular knives (including triangular scrapers for machining, knives with self-locking devices and Single-edged, double-edged, triangular-pointed knives that resemble daggers but are longer than daggers

Tibetan knives, waist knives, boot knives, etc. that ethnic minorities need to wear and use due to their living habits are controlled knives and are only allowed in the country. Sales and use in ethnic autonomous areas.

4. Flammable and explosive items, including: hydrogen, oxygen, butane and other bottled compressed gases and liquefied gases; yellow phosphorus, white phosphorus, nitrocellulose (including film, oil paper and their products and other self-igniting items) ; Metal potassium, sodium, lithium, calcium carbide (carbide, magnesium aluminum powder and other items that burn when exposed to water;

Gasoline, kerosene, diesel, benzene, ethanol (alcohol, paint, thinner, rosin oil, etc.) are flammable Solids; sodium peroxide, potassium peroxide, lead peroxide, peracetic acid and other inorganic and organic oxidants.

5. Toxic substances: including cyanide, highly toxic pesticides and other highly toxic substances.

p>

6. Corrosive items: including sulfuric acid, hydrochloric acid, nitric acid, liquid batteries, sodium hydroxide, potassium hydroxide, etc.

7. Radioactive items: radioactive isotopes and other radioactive items. /p>

8. Other items that endanger flight safety, such as strong magnets that may interfere with the normal operation of various instruments on the aircraft, items with strong irritating odors, etc.

9. Country. Other items that are prohibited from being carried or transported by laws and regulations. Starting from March 14, 2008, passengers on domestic flights are prohibited from carrying liquid items (one piece of each type of cosmetics below 100 ml is allowed). From April 7, 2008, passengers are prohibited from carrying. Any passenger carrying lighters and matches. The Civil Aviation Administration had planned to relax the above two restrictions on December 20, 2008, but later decided to suspend the implementation.

Baidu Encyclopedia - Airport Security

Airport. The specific work of security inspection

is to conduct a series of security inspections on passengers, luggage, cargo, staff, and crew members entering the quarantine area.

At present, the frontline security inspection sites at airports across the country. The staff are basically on a shift system, and they basically work one day and two days off. As mentioned above, 6 hours a day is rare, unless it is a small terminal, and the working hours are basically more than 16 hours. hours, basically some airport security inspections are on a one-off and one-off basis between 17 and 22 hours. Most of the airlines' own cargo and mail security inspections are on a one-off and two-off system. Some terminals across the country have a daily shift system. Is it necessary to adjust during peak passenger season?

Let’s find out what airport security inspectors do when they get older

Introduction We all know that there are security inspectors at stations or on airplanes. Yes, these people are responsible for detecting whether each passenger is carrying illegal prohibited items. Usually, security inspectors are required to conduct inspections when passing through customs. So, let’s take a look at what airport security inspectors will do when they get older.

Airport Security Inspector

Airport security inspection refers to the personal and baggage inspection items that passengers must undergo before boarding. It is also necessary to ensure the safety of passengers themselves and the safety of civil aircraft flying in the air. Measures. Passengers are usually tested to see if they are carrying prohibited items.

Generally speaking, if you are older, you can be transferred to the logistics department to do logistics work, and those with strong work ability can be transferred to leadership and team leaders. But these are usually only transferred by more experienced employees. If you don’t want to be a security inspector, you have no choice but to change jobs.

Because the airport is open 24 hours a day, airport security inspectors usually work in two shifts. This job is quite tiring, especially during the night shift. You have to be alert at all times. After all, security inspection is There cannot be any problems. Once any problems occur, the consequences will be disastrous. Generally, airport security personnel can work between the ages of 40 and 50. Because the biggest disadvantage of security inspection is that the radiation is large and serious, and it will affect the person's body over time. Generally speaking, the work of security personnel is not very difficult.

Are security personnel officially employed?

It is understood that airport security belongs to airport employees, not civil servants. There are two types of security checks. The first is to check passengers for contraband, which belongs to the airport. Contract workers, because after the reorganization of the airport, there are no formal jobs, they are contract workers, that is, airport recruitment and social recruitment. The second type is labor dispatch, which transports labor to the airport from a third party. The general job is to guard the gate, etc. The wages are low and the wages are not paid by the airport.

What are the duties of security personnel

1. Inform passengers to prepare their ID cards, tickets and boarding passes, and maintain order in the waiting area.

2. Inspectors should strictly check the identity cards, tickets, and boarding passes of flight passengers to ensure that there are no changes, forgeries, impersonations, etc.

3. Tourists who have been reviewed accurately should have a stamp of approval stamped on their tickets.

4. When conducting security checks on passengers, security personnel should guide passengers through the security gates one by one.

5. When passing the security alarm, passengers should repeat the door-to-door inspection or use a hand-held metal control test or manual personal inspection, and the release inspection can only be done after any doubts are eliminated. Security gate inspections are generally carried out by the same person; female passengers must be carried out by female security personnel.

6. Passengers who still have questions about the manual personal inspection can, with the approval of the on-duty leader of the security inspection department, be taken to the security inspection room for strict inspection by security personnel of the same gender.

7. Passengers’ checked and unchecked baggage must be inspected by security inspection equipment. Suspicious items should be opened and inspected at any time if necessary. When checking boxes (packages), the shipper or carrier of the suspicious items should be present.

8. If the passenger declares that the items carried are not subject to public inspection, the security inspection department may conduct inspections on appropriate occasions based on the actual situation.

p>

9. International air cargo should be subject to security inspection or storage for 24 hours, or other safety precautions approved by the Civil Aviation Administration of China.

Warm reminder: Security personnel. It is one of the important positions at the airport. If there is no inspection by security personnel, some contraband will be transported to various places by plane, which will be very harmful.

Related reading:

Salary and benefits of airport security inspectors

Beijing entry policy regulations before and after July 1, 2021

Guangzhou Metro face-scanning security inspection

The first batch of Shanghai-Shenzhen Circuit Inspection Office Security Check

What can you see in the X-ray machine security screen at the airport?

The job content of the airport security inspector

The job content of the airport security inspector 1

Before passengers board the plane, a "body search" and baggage inspection are conducted to check whether there are prohibited items prohibited by civil aviation regulations on the passengers and their belongings, which serves as a security check.

Of course, there are also some security inspectors who may be sent to important crossings and entrances of the airport to conduct identity and security checks on people entering and exiting the flight restricted area.

But there are also some. The hardest work is for those who are assigned to guard the aircraft. To ensure the safety of the aircraft, they sometimes have to stand under the aircraft in the scorching sun and cold wind.

The training content is essential for new security inspectors. , much of which has been included in various commercial training software packages, such as: Current Terrorism: Terrorist organizations and their causes, linking from terrorism to other dangerous activities; Why Air Transport: Why Targeting Air Transport and Not Others Modes of transportation; Attacks on the aviation industry: A review of the various attacks on the aviation industry, focusing on the varied methods of attack; International, national and local regulations: Exploring the various parameters that determine the type of passengers and analyzing how people travel Causes, anticipating possible scenarios Passenger profile: the types of dangers each passenger may pose; Behavioral analysis: how we cope with the stress of an emergency; Explosives: the composition of bombs and how they are concealed; Identifying weapons: Identify various types of weapons and their hiding methods; Principles of X-rays = Advantages and limitations of X-rays Baggage inspection: Develop baggage inspection skills; Body search skills: How to search and use magnetic metal detection; Equipment use and maintenance: The use and daily maintenance of X-ray scanners and magnetic metal detectors; the application of new technologies: CT scanning, odor tracking, detection, wave scanning testing, in-body scanning; security inspection methods: various types of scanning methods; management of passageways: identity verification Access, identity documents and their use; Defense of aircraft: threats to aircraft on the tarmac; Security checks on aircraft: ways to ensure that aircraft are free of explosives; Security checks on cargo to ensure cargo safety Emergency measures: how to deal with bombs and Other emergencies; security inspection and service: how to achieve the best combination of high-quality security inspection and excellent service.

Other more advanced courses will also include the following: Handling of travel documents: Checking passports and visas from a security point of view: Identification of forged documents: Various signs of forged or altered documents TRlNING; Inspection of air tickets; Checking from a security point of view Air tickets; Questioning skills: How to extract information from passengers. The ultimate goal of training is to enable trainees to understand the threats faced by the aviation industry and master the necessary technologies to prevent threats from becoming a reality, but this does not mean that X-ray machines The operator must be able to identify every item in the baggage, just the items that pose a potential threat. Four. The purpose of evaluating a practical exercise is to emphasize the importance of security screening and the possible consequences of carelessness. For the organization, this allows management to evaluate the effectiveness of the entire training program; for individuals, since terrorist activities are rare, the drill can motivate employees as part of continuous on-the-job training ~ part of the X-ray machine training drill One method is hazmat projection. The Commonwealth Defense Evaluation and Research Agency (DERA) has conducted extensive investigations in this area. Currently, the system software has been installed into existing X-ray machines so that images of dangerous goods can be scanned during normal scanning. The image is displayed to the X-ray machine operator, and the operator also knows that he is constantly being tested, so he will treat each piece of luggage as a dangerous item and each operator's performance of their duties will be scored accordingly. By counting ID numbers, shortcomings in the work will also be discovered, such as grenades being caught during inspections. This technology is still in its infancy, and research on its effects is also ongoing, and a dangerous goods image library is also being developed. However, even at this early stage, the dangerous goods projection method also provides great help for actual drills. In short, the pre-selection of chief base officers should be consistent with the training provided by i. Let the security inspectors know how to complete the tasks as required, but also let them understand why they do it and what will happen if they don't do it. The security inspectors must keep this in mind. At the same time, the training must be real, and computer-assisted training classroom teaching should be combined with on-the-job training. Combine training and use actual drills and supervision and inspection methods to continuously conduct follow-up evaluations; finally, an unmotivated security inspector cannot be a good security inspector. Merely motivating security inspectors by increasing their income is not enough. Security inspectors should be motivated based on their 'Hire and reward them based on their work performance.

Job content of airport security inspectors 2

Security inspector job responsibilities

1. On-site security management:

1. Check the safe operation of workshop employees (especially the operation of mechanical equipment, and promptly stop and correct any violations and unsafe behaviors.

2. Check various machinery Check the safe operation of the equipment and promptly report any problems to relevant leaders

3. Check the wearing and use of labor protection supplies by workshop employees while working (it is prohibited to enter the production workshop barefoot or shirtless or wearing slippers, shorts, or vests. .

4. Check the integrity of various safety protection facilities in the workshop, communicate with relevant departments in a timely manner and be responsible for following up on the implementation of rectifications.

5. , Check the safe use of electricity in the workshop, and resolutely stop the illegal phenomena of indiscriminate connection, overloading of cables, and placing tea cups, mineral water bottles and other sundries on electrical cabinets, electrical boxes, welding machines and other electrical devices and equipment. At the same time, we also Check the integrity and use of leakage protection devices and electrical equipment.

6. Check the storage and safe use of flammable and explosive items such as Tianna water, oxygen and acetylene (it is strictly prohibited to use Tianna water, oxygen and acetylene). Oxygen bottles are stored under the sun.

7. Check the safety and fire protection conditions of key fire prevention areas such as paint warehouses, gas warehouses, paint mixing rooms, and spray paint rooms, and deal with existing fire hazards in a timely manner. /p>

8. Check the safe use of lifting equipment in the factory: check the wear and integrity of supporting equipment such as wire ropes and hooks, and whether the operators have violated regulations (inclined lifting, overloading, or people standing under the crane) , if any abnormality is found, please stop using it immediately to prevent accidents.

9. Check whether the motor vehicles inside the factory and outside are speeding, leaking oil, leaking water, etc. (Forklifts carrying people are strictly prohibited.

10. 10. Check whether the working channels in the workshop are clear, whether the materials are stacked neatly and firmly, whether there are any inclinations and over-heights, and whether garbage and scrap iron are stacked separately.

11. 11. Check the mental state and labor and safety disciplines of employees during the production process: whether they are concentrating on operating in strict accordance with regulations, whether they are leaving work, missing work, chasing, playing, sleeping, etc. Violations.

12. Check whether employees cut off the power supply before moving the electric fan, and wait until the blades stop rotating before moving. Pay attention to the safety of electricity.

13. Check whether employees are using electric stoves, electric water heaters and other high-power electrical equipment in violation of regulations in the dormitory, or connecting wires indiscriminately. Once discovered, they will be dealt with seriously.

14. Strictly strengthen the management of fire-fighting equipment and equipment, and frequently check the normal use of fire-fighting equipment and equipment in workshops, warehouses, dormitories and other places (whether the water pressure of fire hydrants is normal, whether fire extinguishers are full, and whether there are There should be no air leakage, no damage to fire hoses, etc., as well as whether fire protection facilities, equipment and fire safety signs are in place, complete and effective, and the registration of fire extinguishers used by each team position should be done to check whether there are blockages in fire escapes and fire protection equipment. Whether the storage location of the equipment is occupied. No one is allowed to use fire-fighting faucets to wash hands or take a shower. Anyone who intentionally damages fire-fighting facilities will be reported to the Safety Committee for serious action.

15. Do a good job of preventing heatstroke and cooling down every day. The work of sending and receiving ice cubes, and carefully recording the violations and other safety problems discovered every day and their handling in the security inspection log

2. Safety training and publicity and education:

1. Assist in safety training for new employees.

2. Regularly organize safety knowledge and fire safety education for on-the-job employees.

3. Through blackboards in the factory and workshops. Publicity boards carry out safety publicity and education for employees.

3. Safety inspections:

Regularly organize and participate in safety inspections at all levels, promptly discover and solve problems, and actively prevent the occurrence of safety accidents.

4. Accident handling:

1. Responsible for on-site emergency rescue and personnel evacuation after work-related injuries, fires and other safety accidents

2. , Responsible for the treatment of work-related injuries and accident investigation.

3. Write written reports for safety accidents that have a large impact, propose improvement measures, follow up on rectification, and provide feedback to relevant departments.

Security inspectors must cooperate with various departments in safety education, try to reduce the accident rate of our company to the lowest point, strictly enforce safety production management, improve safety work, and create a good environment. Safe production environment