What is the reverse flow of air conditioning water?

Air conditioning water backflow mainly has the following reasons:

1. After treatment and collision, the water tray shifts. Just reset the water tray.

2. When the system is short of fluorine, the evaporator is semi-blocked, and the system is seriously short of fluorine, the refrigerant will vaporize in 2-3 long U-shaped pipes near the input pipe when entering the evaporator, so it is necessary to add refrigerant.

3. Installation problems lead to water leakage, mainly concentrated in new loaders or air conditioners installed in winter, because the installation is not horizontal or the drain pipe and connecting pipe joint are not wrapped well. Contact the staff to reinstall.

4. If the air conditioner is used for a long time, the water guide tank and the drainage pipe may be blocked by dirt, resulting in water leakage. Need to be cleaned with tools.

5. The filter screen is dirty and blocked, and the low wind gear is used in wet environment. If the air volume is too small, it will reduce the evaporation temperature in the machine, and the evaporator will frost or even freeze, resulting in water leakage. The filter needs cleaning.

6. The aging of the drainage pipe is not strict, and the drainage is not smooth, which leads to the dripping of the air conditioner. Need to replace the new drain pipe.

7. The aluminum sheet of the evaporator of the air conditioner is deformed and touches the edge of the drip tray, resulting in that the air-conditioning water cannot flow to the drip tray and the air-conditioning water flows backwards. Need a professional master to repair it.