Must the automobile dust-free film be operated in the "dust-free construction room"?

Many people ask whether the car film must be operated in the "dust-free construction room".

In the past, due to the limitation of conditions, many automobile decoration shops generally pasted films in the outdoor environment. In recent two years, a so-called "indoor dust-free film" has become popular. The so-called "dust-free film" environment is only improved compared with the past outdoor film, and it is operated in a closed room.

The working environment is much better than outside, which helps to ensure the quality of the film. Therefore, dust-free construction room is very necessary for film pasting.

But this dust-free construction room is dust-free, and strictly speaking, it is not dust-free. Only when the air is filtered in pharmaceutical, precision electronics and other industries to achieve a certain level of purification and dust removal can the environment be truly clean.

Although the environment has an important influence on the quality of automobile explosion-proof thermal insulation film, it is not the only condition. Most of the dust spots on the film are not from the air, but from the car itself. If the installation level of film pasting workers is not high, it is difficult to ensure that there are no dust spots on the film even if it is pasted in a real clean room.

There is no "dust-free film" in the operation specification of International Window Film Association (IwFA). Therefore, as long as the operation is carried out in a clean and sealed professional film pasting room, dust is sprayed before film pasting, and professional tools and standard process flow are used to assemble and paste, the film pasting requirements can be met. The concept of "dust-free film" has a certain commercial speculation component.

What are the conditions for a clean workshop?

Each terminal service workshop must have an independent dedicated clean film room, which can accommodate at least one special tool and equipment with complete vehicle structure and equipment.

The requirements of dust-free film room are as follows: space size: net size: width not less than 4m, length not less than 6m. The minimum space is not less than 24 square meters.

Decoration:

Wall: Waterproof treatment.

Floor: waterproof and anti-slip treatment, surrounding the drainage pipe.

Ceiling: do effective treatment and don't splash dust from high places.

Spray system: The spray system or dust suppression equipment required by Ke Mei film shall be provided.

Tools and equipment:

Tool carts, special tools and supplies, special towels, Bosch digital display baking guns, a full set of Ke Mei brand special tools for film pasting (special scraper, special blade, special cleaning liquid and special installation liquid), and lubricating fluid: Johnson &; Amp Johnson baby shampoo (excluding natural honey), DuPont non-woven fabric, Ke Mei brand special seat cover for film pasting, Ke Mei brand special instrument frame cover for film pasting, trash can (used for placing waste films at corners, etc.). ).),