What types of energy-saving heaters are there? What kind of energy-saving heater is better?

With the continuous improvement of people's requirements for living environment and household goods, various brands and types of furniture and household appliances have been born. Faced with a wide range of products, how should consumers choose correctly? Today, Bian Xiao wants to talk to you about energy-saving heaters. I believe many people should have heard of them or are using them. There are also various types of energy-saving heaters. Next, Bian Xiao will analyze various types of energy-saving heaters for you.

1, Youting energy-saving heater

Also called oil-filled electric heater. This electric heater is filled with a new type of heat transfer oil. When the power supply is turned on, the heat transfer oil around electric heating tube is heated, and then the heat is radiated along the heat pipe or radiator. When the oil temperature reaches 85℃, its temperature control element will automatically cut off the power supply. The heat transfer oil of this electric heater can be used for more than 5 years without replacement, and the price is generally between 400-500 yuan.

There are 7 fins, 9 fins, 10 fins, 12 fins, etc. The power can be adjusted by selecting the number of fins. The greater the power, the higher the heat. Therefore, for users with different temperature requirements, it is convenient to choose an oil heater to adjust the heat.

Advantages: the oil heater emits a lot of heat, and it will keep a certain temperature for a long time even in the case of sudden power failure. At the same time, it will not produce harmful gases, and there is no noise from the operation of electrical appliances, so it is relatively safe.

Moreover, the surface temperature of the oil-filled radiator heater will not be too high, and even if it touches the human body, it will not cause burns. Suitable for heating in places where the human body may be in direct contact. Of course, if you have children at home, you should be careful not to go near the equipment.

Besides being clean and having good heating effect, oil heaters are also suitable for bedrooms and bathrooms. Some products are also equipped with shelves for drying clothes at the top, and users can also bake clothes on them. In this case, rainy weather is also very practical.

Disadvantages: the oil heater has a long preheating time, too much power, and the household with small electric meter capacity or low voltage cannot use it. In addition, the oil heater has a disadvantage similar to heating, that is, it is easy to dry the indoor air. But at present, many new oil heaters have humidification function, which makes up for this deficiency. Although it can't guarantee that the air is moist enough, it is much better than before without humidification function.

2. Halogen tube heating energy-saving heater

Halogen tube is a kind of sealed light-emitting heating tube, which is filled with halogen element inert gas, which can inhibit the evaporation of tungsten wire and prolong the service life of tungsten wire, thus prolonging the service life of heater. There are two kinds of tungsten wires in the middle, white and black, but the cost of white tungsten wire is much higher than that of black tungsten wire, so it is not popular in the market. At present, most halogen tube heaters in the market use black tungsten wires.

Halogen tubes have the advantages of high thermal efficiency, non-oxidation when heated and long service life. Some models also have functions such as timing, rotation and humidification. Halogen tube heaters radiate heat by emitting light. Generally, 2~3 halogen tubes are used as heating sources, and the power consumption is about 900~ 1200W, which is more suitable for rooms with an area of about 12 square meters. Some advanced products have the functions of automatic power failure and automatic shaking of the head when falling, and the design is simple and practical.

Advantages: Halogen tube has the advantages of high thermal efficiency, no oxidation during heating and long service life. Some models also have functions such as timing, rotation and humidification. Halogen tube heaters radiate heat by emitting light. Generally, 2~3 halogen tubes are used as heating sources, and the power consumption is about 900~ 1200W, which is more suitable for rooms with an area of about 12 square meters. At present, some advanced products have the functions of automatic power-off and automatic shaking, and the design is simple and practical.

Disadvantages: halogen tube heater will produce strong visible light when heated, so it is not suitable for use in bedroom; The glass tube in the heater is easy to burst when heated by cold water, so this heater is not suitable for use in the bathroom.

3. Electric heating wire energy-saving heater

Heaters using electric heating wires as heating materials are mainly more and more traditional heaters on the market. Its heating element is an electric heating wire, and the heat generated by the electric heating wire is blown out by a fan. Then there is a new product on the market now: it looks like an electric fan. The heating wire is wound around the ceramic insulating seat to generate heat, and the heat energy diffuses into the room through the reflecting surface.

Like the electric fan, this heater can automatically rotate the angle to heat the whole room, which is suitable for small rooms below 8 square meters. The new product also has the functions of ultrasonic humidification, releasing oxygen-carrying negative ions and broad spectrum. Disadvantages are that the temperature drops quickly after shutdown, the heating range is small, and oxygen is consumed, and the heating wire is easy to break after long-term use. Because the cost of the heating wire itself is relatively low, the wire body is broken, and the maintenance will not be overburdened. General power consumption is about 800 ~1000 w.

Advantages: it can automatically rotate the angle, and some new products have the functions of ultrasonic humidification, releasing oxygen-carrying negative ions, broad spectrum and so on. The electric heating wire heater is durable, not easy to age, and spreads the heating point to the whole surface of the heater, and is evenly heated; Stepless temperature regulation, accurate temperature control, low power consumption, very energy-saving and electricity-saving,

Disadvantages: the temperature drops quickly after shutdown, the supply range is small, and oxygen consumption is high. The heating wire is easy to break after long-term use, and it is only suitable for rooms below 8 square meters.

4. Carbon fiber energy-saving heater

Carbon fiber heater is a tubular heater made of carbon fiber as the basic heating material, which uses reflective surface to dissipate heat. Integral vertical barrel type and rectangular floor type: straight-through type generally adopts single-tube heating, and the machine body can rotate automatically to heat the whole room. After turning on the power supply, the temperature rises rapidly, and the body feels hot at 1~2 seconds. The surface temperature can reach 300-700 degrees in 5 seconds, and the power can be adjusted at 600 ~1200 w. Rectangular floor-standing type adopts double-tube heating, which can be used for floor-standing or wall-hanging type, and the power is relatively large, about1800 ~ 2000 W.

In addition to heating function, this kind of products can also play the role of health care and physical therapy. When the heater is heated, it can generate 765.9W/M infrared radiation, which is equivalent to a spectral physiotherapy instrument.

Advantages: fast heating, convenient installation, and health care and physical therapy effects.

Disadvantages: large power consumption, small heating area, no energy storage, heat loss when power is cut off, and high price.

5. Ceramic heater energy-saving heater

Ceramic heating element is a heating element which is fixed by electric heater and ceramic through high temperature sintering. It can adjust the resistance according to the body temperature to keep the temperature at the set value without overheating, and has the characteristics of energy saving, safety and long service life.

This kind of heater does not emit light, has no open flame, consumes no oxygen, and has the function of automatic constant temperature with soft air supply. The output power of PTC ceramic heater is 800- 1250W, the temperature can be adjusted at will, there is no light consumption when working, and there is an automatic switching device, which is efficient, energy-saving and safe.

PTC ceramic heaters are mostly used in bathrooms and some small bedrooms. Ceramic heating speed is slow, but the heat storage effect is good, which is more suitable for families with old people and children.

Advantages: light and thin appearance, protective cover and safe use. Strong mechanical properties, corrosion resistance, magnetic field resistance, no oxygen consumption and no oxidation.

Disadvantages: PTC series heaters are not suitable for use in dirty and dusty places.

6. electrothermal film energy-saving heater

The electrothermal film heater adopts transparent high-temperature electrothermal film as heating material, adopts hot air channel structure, and the heat transfer mode is enhanced convection. The hot start-up speed is fast, and the air outlet temperature can reach above 100℃ within 3 minutes, but it cools quickly after power failure.

Because the electrothermal film does not oxidize when heated, its service life can reach 6.5438+10,000 hours, and it has the characteristics of small volume and beautiful appearance. Siphon heat pipe heater This is a new type of electrothermal film heater, which uses "two-phase closed thermosyphon" as the heat source, with fast temperature rise and high thermal efficiency. No light, no open flame, not afraid of water shower and water vapor corrosion when working, suitable for ordinary rooms and bathrooms, the price is around 400 yuan.

Advantages: safe and efficient, electrothermal film heating, high thermal efficiency, fast temperature rise, more energy-saving and electricity-saving.

Disadvantages: fast cooling, power attenuation, short service life and no electromagnetic shielding, which is not conducive to human health.

7. Convection energy-saving heater

There is an air outlet and an air inlet under the shell of this electric heater. After electrifying, the air around the electric heating tube is heated up and flows out from the air outlet, and the surrounding cold air enters the supplement from the air inlet. This repeated cycle can increase the indoor temperature.

When the water inlet and outlet are blocked or the ambient temperature is too high, the temperature control element will automatically cut off the power supply of electric heating tube. The power of this electric heater is about 800 watts, and the power can be adjusted by increasing or decreasing the number of connected electric heating tubes. The electric heater has high safety performance and quiet operation, but the disadvantage is that the temperature rises slowly.

Advantages: dual-purpose desktop, space saving, temperature control design, simple and clear.

Disadvantages: slow temperature rise, poor safety, no grounding protection, easy to get an electric shock accident.

8. Energy-saving heater with quartz tube heater

The quartz tube heater is mainly composed of sealed electric heating elements, parabolic or arc reflectors, protective strips, power adjustment switches, etc. It uses the timely radiation tube as the electric heating element, and uses the far infrared heating energy-saving technology to make the far infrared emitted by the far infrared radiation element be absorbed by the object and directly converted into heat energy to achieve the purpose of heating, and at the same time, the far infrared can also play a physical therapy role on the human body.

Generally, 2~4 quartz tubes are installed, and some or all of them are put into operation through the power switch. The quartz tube consists of an electric heating wire and a timely glass tube. Quartz tube heater is characterized by rapid temperature rise, but small heating range, easy to produce open flame and consume oxygen. Although it used to sell well because of its low price, it has obviously shown a downward trend.

Advantages: its heating element is an electric heating wire, which passes through the quartz tube, and the quartz tube plays the role of support, protection and heating. The far infrared quartz tube is used for heating, and the heat transfer mode is radiation, which has strong penetration and good heating orientation. Quartz tube electric heater has the characteristics of small and beautiful appearance, fast heat transfer, convenient movement and low price.

Disadvantages: small heating range, suitable for small rooms with an area of about 10 square meter. It glows when heated and is not suitable for use in the bedroom. In addition, quartz tube heaters are rare in the market because of the easy oxidation of electric heating wires. Due to radiation heating, the heat transfer distance is close, the heating wire is easy to deform, and the quartz tube is easy to break if it is not careful.

The above is the knowledge about energy-saving heaters compiled by Bian Xiao. I believe everyone has a better understanding of energy-saving heaters after reading them. In fact, different types of energy-saving heaters have many different advantages and disadvantages. Bian Xiao thinks that friends who need to buy or replace energy-saving heaters should choose according to their actual situation, but there are many chaos in the market now. Bian Xiao suggested that you should choose a regular store to avoid buying fake and inferior products. I hope Bian Xiao's suggestion can give you some help.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~