Fire hydrant instruction slogan

Fire signs include fire equipment system signs, fire engine room signs, fire facilities signs and equipment management signs.

Fire signs can be divided into suggestive signs, warning signs, indicative signs and prohibitive signs according to their functions.

Its installation requirements and functions are: 1. Public facilities (1) floor light signs and floor stop number signs are installed in the elevator halls of each floor to remind people on the upper and lower floors. (2) Emergency indication signs, which are respectively installed at the corridors and stairs of each floor of the residential building, are used for emergency lighting in case of fire and indicate the safe evacuation direction of the personnel area. (3) No smoking sign. No smoking signs are installed in public places and elevator boxes in the community to remind people that smoking is not allowed in public places and to prevent fires in civilized offices. (4) Fire-fighting equipment signs, the direction of fire extinguishers installed on each floor, are used to remind people that there are fire-fighting equipment in this direction, and they should be used in time in case of fire. (5) Fire alarm telephone signs. Fire alarm telephone signs are installed in each floor passage to remind everyone to remember the fire alarm telephone number at all times and call the police in time in case of fire. 2. Signs of fire-fighting equipment system (1) Signs of fire-fighting water supply pipes. All the fire-fighting water supply pipes in the building are red according to the requirements of specifications, and the pipes have clear numbers, indicating that the pipes are water supply areas of fire hydrant systems or shower systems. (2) signs of fire hydrants. The words "fire hydrant" are printed on the doors of all fire hydrants in the community to remind people that there are fire hydrants there. (3) Signs of smoke exhaust system of high-rise and middle-high-rise buildings. A smoke exhaust window is set at one side of each corridor, and a smoke exhaust window control device is set at the corresponding position, marked with the words "Press the red button in case of fire". (4) Signs of pressurized air supply system: In the fire elevator room on each floor and on the stairs in the fire-proof building, pressurized air supply shutters are set, so that in case of fire, positive wind can be sent to the area to avoid smoke and fire from entering, and people can be evacuated smoothly. (5) Fire elevator sign. The fire elevator room on each floor is marked with the words fire elevator, indicating that the elevator is a fire elevator. 3. Fire engine room sign (1) Fire pump sign, each pump is marked with the words such as pump number and power. (2) The sign of the fire water tank is the limit sign indicating the fire water storage capacity on the water supply tank. (3) All fire fans in the community are marked with exhaust fan signs, with words such as "P", "S" and power. (4) The brand of the monitoring center is placed at the gate of the monitoring center, and the brand of the monitoring center is hung. On the console of the duty room, there are special signs such as power supply system signal indication and control operation button. 4. Fire control facilities and equipment management sign (1) Fire control equipment inspection and maintenance record sign. (2) Fire fighting equipment commissioning record mark. (3) Fire-fighting equipment fault maintenance sign. (4) Signs of various management systems related to fire control in the monitoring center. (5) Fire fighting scheme and fire fighting command system diagram. (6) Fire pipeline signs and plan. The general requirement for setting fire signs is that buildings should be equipped with various fire-fighting equipment and facilities, and signs should be installed in appropriate and eye-catching positions. Pay attention to the specific settings: 1. Set a sign in the field of vision. 2. Use safety colors, safety symbols and safety signs according to national standards. 3. When you must use words, you must be few and precise, and no one will read more. 4. The height, density and width of characters must be adapted to the visual field distance. Check it every once in a while, and update the damaged ones. 6. All kinds of signs shall not be arbitrarily used for other purposes, and the responsible departments shall conscientiously implement them in accordance with the provisions of a comprehensive survey once a month to ensure that all kinds of signs are in good condition.