Instructions for the use of the remote control of the road gate

The road brake remote controller is an intelligent multifunctional manual and wireless remote control device designed by digital technology, which has good intelligent judgment function and high reliability. It is the first choice of automatic control equipment in electric road braking system at present, and can be widely used in remote control of road braking in residential areas and parking lots. It has the characteristics of small size, simple use and reliable performance, and can reach150m at the farthest.

Code checking mode

The way to check the code of the road gate remote controller is to press the check key on the cover, and the indicator light will light up. Press any key on the remote control twice, the indicator light flashes quickly and the code is aligned successfully. Repeat to learn another remote control. You can learn up to 20.

Clear code

At the same time, press the two key indicators on the top row of the remote control and flash once, and then flash for about 2 seconds, indicating that the removal is successful. After clearing, press the four buttons of the remote control, the indicator lights will flash only once, and then go out.

copy

Place the original remote controller and the duplicate remote controller side by side (it is best to hold the duplicate remote controller in your right hand), and press any key of the two remote controllers at the same time. The indicator light of the duplicate remote controller flashes to indicate that the copy is successful. Only 1 sec can copy successfully. Copy the other three key pairs in the same way in turn.

recover

If the useful code is cleared by misoperation, you can press the two buttons in the lower row of the remote controller for 2 seconds at the same time before copying other remote controllers, and then the indicator light flashes quickly to recover successfully.