Safety operation procedures for tower crane workers?

It is very important for tower crane workers to operate safely. The original intention of formulating safety operation procedures is to better ensure construction safety, so as to achieve the expected construction effect. Zhongda Consulting will explain the safety operation procedures of tower crane staff to you.

1. Before getting on the computer, the tower crane staff should first check the power supply control insurance system of the machine and distribution, and check whether there is any abnormal phenomenon and the upper and lower power cords are in good condition before getting on the computer. 2, enter the operating room, a look at the rotating power insulation layer, two check each indicator light, three try each part of the controller, four listen to the warning sound device, solve problems in time. 3, out of the operating room, check the rocker arm rotating lifting device and wire rope, limit automatic device, sliding power cord, etc., in the case of ensuring intact, can back to the room to boot. 4. When lifting any object, the hook must be locked, and the personnel on board must leave the scene before lifting. 5. The various rolling, sliding and lifting parts on the tower crane arm should always be lubricated, and the rolling wire rope should be kept burr-free, smooth and flat. 6. The objects hoisted on the ground must be stored at a point where the personnel on board can see clearly and have a clear goal. It is forbidden to have obstacles in the middle of things. Stop the machine, and it is forbidden to hang objects on the hook. It is beneficial to lift them to the level of the staff, and then pull them inward for three meters away from the studio. 7. Before coming off work, turn the boom studio to aim at the upper and lower handrails. In case of storm, the boom should stop in the downwind direction. Guard against accidents, then turn off the power and lock the operators. After getting off the tower, pull down the main power supply and lock the distribution box. Certification materials for ensuring safety production input Management measures for safety production input In order to ensure the physical and mental health of all employees, nip in the bud, increase investment in safety production, and accelerate the upgrading of safety products, this method is formulated: 1. The company authorizes the Safety Management Department to assign special personnel to ensure the use and supervision of the investment funds for safety production, and directly report the implementation to the deputy manager and general manager in charge. 2. All departments and project departments should actively cooperate with the Safety Management Department to check, register and record the safety production equipment, and record the updated and unqualified equipment and the safety replacement products that must be eliminated in detail and report them to the board of directors of the company to ensure the full payment of investment funds for safety production. 3, the finance department should give priority to ensure the safety in production investment funds, earmarking, for safety in production investment funds, no one may misappropriate, once found, depending on the seriousness of the case to do serious processing until legal responsibility shall be investigated. 4. Safety in production is a prerequisite to ensure the normal and orderly production and operation of enterprises. On the premise of ensuring the special funds for safety in production, the company will increase the investment in safety in production and improve the safe working environment of employees with 5, yuan of funds every year. Annual safety capital investment plan and implementation increase investment in safety production, ensure the effective use of safety production expenses, plan and make good use of the expenses included in the project budget for safety production working environment and safety construction measures, and improve safety production conditions. 1. From 23 to March 24, we invested 28, yuan to completely eliminate the construction hoisting machinery and equipment prohibited by the state and the province, replaced steel pipes and fasteners to build 5 hoisting tic-tac-toe frames, 9 construction hoists (model: JK--1.5, motor 7.5), purchased 9 sets of SMZ--15 self-opening gantry cranes, and added 15 sets of safety protection appliances. 2. Establish and improve the safety production responsibility system and safety education and training system. The company invests 5, to 6, yuan in safety education and training funds every year to provide annual safety education and training for managers and employees, so as to improve the safety quality of all employees. More than 6 people have been sent to participate in the training courses on safety production and construction management held by provinces and cities, and obtained the qualification certificate, which ensured the operation and construction safety of special posts and eliminated unnecessary safety hazards. 3. Safety protection for work near the edge and hole, climbing and hanging is an inseparable part of eliminating construction safety hazards and improving the working environment. According to the requirements of the safety technical specification of JGJ89--91, 8, yuan is invested every year to improve the protection facilities, improve the safety operation coefficient of edge, hole, climbing and hanging, and increase the safety protection. 4. The company invested 8, yuan annually to transform the temporary electricity consumption on the construction site according to JGJ46--88〉, achieving three-level power distribution and secondary protection, implementing one machine, one brake, one box and one lock, and setting up and hanging eye-catching warning signs, which made the electricity consumption on the construction site meet the safety technical specifications. 5. Rules, regulations and publicity atmosphere are powerful guarantees to ensure construction safety. The company invests 5, yuan every year for the production and publicity and education of safety rules and regulations placards on the construction site, so that every employee can establish a firm concept of safety production, forming a situation in which everyone stresses safety and everyone pays attention to safety among all employees, and improving safety awareness from the surrounding environment.

for more information about the engineering/service/procurement bidding, and to improve the winning rate, you can click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd