What is mobile phone coating?

Which brand of mobile phone has the best painting?

Everyone is used to cell phone film, but they haven't realized the harm of cell phone film. They think that mobile phone film can't prevent scratches. In fact, the average service life of mobile phones is changed once every two years. For fast-moving consumables, film protection has no benefits except preventing scratches, such as light transmittance, eye protection and hand sensitivity. If you don't change the membrane for the time being, it is easy to breed bacteria around, which is very unhealthy. The film will also affect the heat dissipation of the mobile phone. For example, most mobile phones now use curved mobile phone screens, and the film can't fit completely, and both sides are easy to start and always change, which is not green and environmentally friendly. The coating technology of "Beautiful as New" nano-mobile phone is to improve hand feeling, touch sensitivity, screen definition and wear resistance, without frequent replacement, which is very green and environmentally friendly. The nano-coating of "Beautiful as New" mobile phone not only protects your mobile phone screen, but also protects your eye health.

Is it true that mobile phones are coated?

The coating of mobile phone is real. There are two kinds of mobile phone coatings on the market, one is waterproof and the other is scratch-resistant and wear-resistant.

Note: Mobile phone coating is similar to the upgraded version of mobile phone film. It is more invisible and feels better, but it also makes users less concerned about its existence. Moreover, if the coating of the mobile phone is scratched, you may need to repaint it as a whole, which is more expensive than the coating of the mobile phone.

The mobile phone coating is removed as follows:

1, nano-coating: the crystalline product is very hard.

2. It must be sanded.

3. Rough polishing.

4. Moderate polishing and polishing reduction.

4. Liquid film: Apply toothpaste to a small handkerchief or towel and evenly apply it to the mobile phone film or mobile phone case (the mobile phone case is soft and most effective). Don't apply too much, just cover the scratches on the phone film or phone case.

5. 1~2 minutes later, wipe it with a towel or handkerchief and leave it for one night, and these mobile phone liquid films can be removed.

What are the advantages of coating mobile phones?

Mobile phone coating can replace the main functions of mobile phone film and mobile phone case, such as scratch prevention, especially the whole machine processing, including slots and jacks.

However, there are also some things that mobile phone coatings can't do, such as particularly serious destructive scars. Mobile phone coatings can only be replaced with new ones, but mobile phone coatings cannot be replaced, so each has its own advantages and disadvantages, and mobile phone coatings have more advantages.

Mobile phone coating machine can really protect more during processing. However, the speed of mobile phones is getting faster and faster, and heat dissipation and power saving are also the key issues, which are related to service life and durability. Mobile phone film and mobile phone case will hinder heat dissipation, block the light of display screen and affect light transmittance.

In order to increase the waterproof effect, more waterproof agents are added to the coating of mobile phones. Disadvantages are like coating a plastic film, the thickness is usually calculated in microns, and the durability and service life are relatively short. The same is true of many automotive coatings. It works well at first, just like online video demonstration, and it is usually a little disappointing after use.

Each has its own advantages and disadvantages, please choose carefully ~ ~ I hope you are satisfied with my answer.

What is the principle of nano-coating on mobile phones?

As we all know, the traditional mobile phone film is made of plastic, and the mobile phone film itself has a certain thickness, which produces a large optical refractive index, which makes the screen gloss of the mobile phone very dull, obviously improving the fatigue of the eyes, and the surface of the plastic film is very easy to breed bacteria. Everyone uses mobile phones all the time in their daily lives, so your mobile phone is the biggest breeding base for bacteria.

Scientists have confirmed that the bacteria on mobile phones are 18 times that on toilets. Different from the traditional film, it is not a film, but a liquid. This liquid is not magic water, but silicon dioxide purified from quartz sand. This nano-silica can directly penetrate into the gaps between mobile phone molecules, increase the density and hardness of the screen, and can play the roles of scratch resistance, wear resistance, fall resistance, brightness enhancement and high definition. It also uses advanced nano blue light blocking technology to effectively prevent blue light and greatly reduce the eye fatigue of mobile phone users.

What is the principle of nano-coating on mobile phones?

As we all know, the traditional mobile phone film is made of plastic, and the mobile phone film itself has a certain thickness, which produces a large optical refractive index, which makes the screen gloss of the mobile phone very dull, obviously improving the fatigue of the eyes, and the surface of the plastic film is very easy to breed bacteria. Everyone uses mobile phones all the time in their daily lives, so your mobile phone is the biggest breeding base for bacteria.

Scientists have confirmed that the bacteria on mobile phones are 18 times that on toilets. Different from the traditional film, it is not a film, but a liquid. This liquid is not magic water, but silicon dioxide purified from quartz sand. This nano-silica can directly penetrate into the gaps between mobile phone molecules, increase the density and hardness of the screen, and can play the roles of scratch resistance, wear resistance, fall resistance, brightness enhancement and high definition. It also uses advanced nano blue light blocking technology to effectively prevent blue light and greatly reduce the eye fatigue of mobile phone users.

Is it true or not that the mobile phone is coated with shatterproof film?

Sticking a toughened film on a mobile phone is a very familiar measure to protect the screen. With the beginning of the era of using smart phones, mobile phone film has become a new industry. The earliest film pasting to the most popular tempered film are all protective measures for users to ensure the safety of mobile phones. With the progress of science and technology, a new nano-coating technology for mobile phones has become popular in the market. I also conducted my own experiments some time ago, and it is really good to objectively evaluate the mobile phone film.

I saw this booth on the pedestrian street. The stall owner is demonstrating the screen hardness enhancement test with a hammer. The onlookers are very popular and the paint business is getting better and better. I had to wait in line until six or seven people did it before I made this coating for my mobile phone.

The game is highly free, and you can choose the development plan.

advertisement

While waiting, I also observed the hammer that the boss smashed the mobile phone. This is really a real mobile phone hammer and a real hammer. It can be opened and slid. The boss clicked on the game on the spot to prove that his mobile phone was ok.

I was also curious, so I remembered the brand of Membrane Best, found the information of Nanotechnology of Membrane Best on the Internet, and learned the coating principle of Membrane Best mobile phone through communication with technicians.

The core of mobile phone coating is nano-coating solution. This brand of nano-coating liquid is made of silica purified from agate, which is three times harder than the first generation ivory coating liquid and can be crystallized. This is amazing. After the mobile phone screen is constructed, the molecules in the nano-coating liquid will penetrate into the gaps of the screen and fill the gaps around the screen to increase the hardness of the screen. Finally, a nano-coating with the thickness of 12 micron is added to the screen.