Is it okay to use a wash basin without glass glue?

Is it possible to use a wash basin without glass glue?

Is it possible to use a wash basin without glass glue? The wash basin is the place where we wash our hands and receive water every day, so the wash basin is also a place in the bathroom. It is an important appliance, but over time problems will often occur with various furniture. Sharing below: Is it okay to use a wash basin without glass glue? Is it okay to use a wash basin without glass glue? 1

Required.

All bathroom cabinets, sinks, bathtubs, door frames, toilets, etc., where they are in contact with the floor and walls, must be closed with glass glue to prevent water from seeping through the gaps. Most craftsmen can seal the bathroom well with glass glue.

Glass glue must be moisture-proof and mildew-proof, so it can last longer. Once there is serious mold, it cannot be washed away, so you have to replace it all. The edges around door frames and countertops, as long as they are in contact with walls and floors, must be edged with glass glue.

Notes:

1. The glass glue used in home decoration is divided into two categories, neutral and acidic. However, many people do not understand the performance of glass glue, so it is easy to use neutral glass glue and acid glass glue in reverse.

2. Neutral glass glue has a smaller viscosity and is generally used in places that do not require strong viscosity. Therefore, neutral glass glue is used more often in home decoration. Another reason is that it does not corrode objects, while acidic glass glue is generally used in the dumb areas on the back of wooden lines, and the adhesive relay is relatively strong.

3. The most common problem with glass glue is that it will become moldy and turn black. Even if waterproof glass glue is used, mold and other problems cannot be completely avoided. Therefore, it is not suitable to be constructed in places where there is water for a long time or is soaked in water. .

4. When using glass glue, the bonding surface must be clean and free of dirt and residue. Otherwise, the bond will be weak or fall off after the glass glue solidifies. Is it possible to install the wash basin without glass glue? 2

Do I need to apply glue to install the wash basin drain?

1. The current basin drainage is designed for quick installation without glue. However, for safety reasons, you can use raw material tape to block the leak. Just place it directly under the basin, tighten it with a large nut, and then put the water pipe on it.

2. Floor drains on the market are mainly made of stainless steel and plastic. Stainless steel drainage pipes are characterized by good anti-rust and anti-corrosion properties and long service life. Plastic drainage pipes are characterized by their strong flexibility and low price. When purchasing, it depends on personal needs.

3. If the basin at home is a double-layer basin, it is best to choose a drain with an overflow outlet, because the design of this overflow outlet can prevent water from overflowing and overflowing the basin. As long as the overflow level is exceeded, water will flow out of the gap in the basin.

4. Before installation, do some processing on the damaged sewer pipe. What needs to be noted here is that the glue and debris at the mouth of the basin must be cleaned up to ensure that there is no leakage during later installation.

What kind of glue is used to drain the water from the washbasin?

Glass glue is usually used for sealing. Sealing method:

1. Check whether the spare parts of the basin drain assembly package are complete;

2. Remove the locking nut of the main body of the basin drain assembly;

3. Wipe around the basin drainage hole, apply a circle of waterproof glass glue on the bottom of the drainage hole, then insert the basin drainage plug into the basin drainage hole, and press the mating surface tightly;

4. Place the basin on On the countertop, install the locking nut from below and lock the basin drain body tightly on the basin;

5. Finally, lift the boom, lock the lock at the bottom of the boom, and select the appropriate boom. (There are many small holes on the lock piece that can be adjusted), use the card to clamp the passing lever, and through the lock piece, the installation of the entire pull-up basin drain is completed.

How to remove a wash basin stuck with glass glue

1. Because the glass glue is still very sticky, it requires a series of steps to remove it. . First, we can wet the glass glue with water, or choose xylene solution to wipe it. Additionally, banana water also contains this ingredient.

2. Sprinkle banana water evenly on the joints of glass glue. After reaction for a period of time, we will remove it with a scraper.

At this point, you will find that removal is very easy.

3. When disassembling, hold the washbasin with one hand to prevent it from falling. When all the glass glue is peeled off, the entire wash basin can be removed. Is it okay to use glass glue on the wash basin? 3

1. What can be used to glue the cracks in the glass of the wash basin? 1. Use glass glue to repair the glass.

The glue is squeezed into the cracks. After the glass glue solidifies, the cracks will be repaired. However, after the basin is repaired in this way, it looks unsightly, so many people do not like to use this method to repair the basin. Under normal circumstances, only some public places will use this method.

2. Repair with repair agent

First, thoroughly clean the inside and outside of the basin. There should be no residue on it, otherwise it will affect the repair effect. Then we have to use a sander to sand the area that needs to be repaired, which needs to be very rough. Then wipe the polished area clean with rubbing alcohol. We need to be careful not to use our hands, because if the oil on our hands gets on it, it will affect the repair effect. Finally, apply the mixed base material and curing agent. During the application process, we take care to remove air bubbles. This completes the entire repair process.

2. What to do if the wash basin is cracked

1. If the crack is not large, you can use white cement to repair it and apply it directly to the crack evenly. Can.

2. If the crack is relatively large, you can also use glass glue to directly apply it to the crack. After curing, you need to use a knife to remove the outer glue marks. Or you can use ceramic metal repair agent to repair it. The operation method is the same, and the beauty of the basin will not be affected after repair.

Note: When using glue, it needs to be prepared in a certain proportion and mixed with water. After the preparation is completed, be sure to stir it evenly, and then use a small brush to evenly apply it to the gaps. The thickness should not be too thick. At the same time, it should not be too thin, and it can be operated repeatedly until there are no bubbles on the surface. And it cannot be used immediately after the repair is completed. The glue can only be used after it has completely solidified, otherwise it will easily affect the repair effect.

3. Why cracks appear in the wash basin

1. Cold cracks

Mainly occur at the interface of the wash basin. During the manufacturing process It was not handled properly during the process, resulting in cracks at the interface. Thermal expansion and contraction promote cracking.

2. Thermal explosion

Due to uneven heating of the basin body and glaze, cracks occur.

3. Material

Pottery is a material with low thermal conductivity. When hot water is poured into it, its parts will expand rapidly. The thermal conductivity of ceramics is low, and heat cannot be transferred out quickly, causing a large temperature difference between the two and causing cracks. This phenomenon occurs more frequently, especially in winter when temperatures are cooler.

4. How to choose a bathroom wash basin

1. Choose the bathroom area; if you plan to buy a style with a cabinet, before purchasing It is necessary to measure the pre-installation position and calculate the opening angle. If the bathroom is smaller, you can choose the one with a larger wash basin and retracted cabinets below. Generally, the best installation height of basin is 75-85cm.

2. Choose according to personal preference; if you particularly care about the effect and aesthetics, choose an above-counter basin; if you particularly like cleanliness, from a practical point of view, choose an under-counter basin; if you want to save space There is also the option of a pedestal basin.

3. Touch and observe: Currently, most basins use ceramics. You can touch the ceramic surface with your hands. It should feel delicate and smooth. You can also sprinkle some water drops on the basin to quickly slide off the basin without leaving any residue, making it easier to clean in the future and less likely to attract stains.