Shelf team security system?

1 General Provisions 1. 1 Scaffolding team is the main body responsible for site construction, production and safety management. In order to further consolidate the safety management of scaffolding team, clarify responsibilities, ensure the safety of construction and production, and build the basic line of defense for the safety production of China Hydropower Third Bureau, this system is specially formulated. 1.2 Scope of application Various forms of shelving teams established in the construction of projects under construction. 2. Responsibility of safety responsibility system 2. 1 Responsibilities of safety production team a) Responsible for publicizing and implementing the safety guidelines, policies, laws, regulations and rules of the state, industry and higher authorities; B) Be responsible for organizing the establishment and improvement of the safety management system of the team, and defining the division of labor and responsibilities of departments and personnel; C) Organize the formulation of safety objectives, and review the safety management system, assessment methods and safety assurance measures; Organize three-level safety education and training for employees. D) Hold regular meetings to study and deploy safety production, solve safety problems existing in construction and production, and formulate and implement rectification measures for potential safety hazards. Organize a safety inspection once a week to find out potential safety hazards, put forward rectification measures, and urge each team to rectify in place. Hold group meetings regularly, analyze and rectify the safety accidents of the shelving team according to the principle of "four don't let go", find out the cause of the accident, analyze the responsibility of the accident, educate the operators, implement the rectification measures e) conduct three-level safety education and training for employees. F) Formulate safety production measures and safety production management system for shelf team. G) Organize safety accident investigation, and report to 2.2 Captain's responsibility for production safety according to the accident level; A) Take full responsibility for the safety production of the pipe section under its jurisdiction, and be the first person responsible for the safety production of the shelf team; B) Be responsible for publicizing and implementing the national, industrial and superior safety guidelines, policies, laws, regulations and rules; Be responsible for establishing and perfecting the responsibility system for production safety of the construction team and ensuring its implementation. C) Responsible for implementing the investment in production safety and organizing safety education and training; Guide and supervise the work of safety personnel, and give corresponding rewards and punishments. D) Organize the safety inspection of the team, preside over the safety production meeting, and organize the safety assessment, rewards and punishments; Report the safety management work to the superior regularly; E) Organize emergency rescue and report of accidents, actively cooperate with the investigation, analysis and handling of casualty accidents, and be responsible for implementing corrective measures. 2.3 Party branch's responsibility for production safety a) Participate in the decision on production safety; B) Take safety in production as the content of striving for excellence within the Party, and insist on carrying out activities in party member safety responsibility area. C) Do a good job in safety publicity, commend advanced models, and introduce advanced experience and accident lessons. D) Responsible for coordinating the relationship between production and operation, trade unions, the Communist Youth League and other organizations in the management of * * *, supporting them to independently carry out various activities and give full play to their respective advantages. E) Supervise the implementation of rules and regulations and safety production input. 2.4 Safety production responsibilities of the technical supervisor a) Take technical management responsibility for the safety production of the shelf team, be responsible for formulating safety technical measures, and organize the safety technical disclosure of the team; B) Be responsible for the safety technology education, training and assessment of employees. C) Organize the implementation of the emergency rescue plan issued by the project department, or refine the team-level emergency rescue plan, organize the disclosure and training of the emergency rescue plan and emergency measures and methods, and urge the drills. D) Organize relevant technical personnel to inspect and accept the implementation of on-site safety technical scheme and the installation of safety protection facilities. E) Participate in accident investigation, organize relevant personnel to conduct safety technical research and technical innovation, and solve safety technical problems. 2.5 Safety production responsibilities of safety officers a) Participate in the hazard identification and evaluation of the team, and determine the high school risks and their hazards; Participate in the preparation of construction safety technical measures, and make safety technical disclosure to shift operators; For high-risk operation activities, carry out follow-up operations. B) Be responsible for daily safety inspection, participate in regular safety inspection, urge employees to implement safety operation procedures, stop illegal operations, and urge the team to rectify existing problems. C) Be responsible for the implementation of safety warning signs and publicity slogans in construction sites and dangerous places. D) Be responsible for establishing the certified account of special operations personnel of the team and regularly checking the certificates of special operations personnel; E) Supervise the team to make pre-shift speeches and check before, during and after work; F) Be responsible for the safety technology education and training of employees; Conduct team-level safety education for newcomers, and conduct safety technology and pre-job education for workers. G) Supervise relevant personnel to timely distribute and reasonably use protective articles, health food and heatstroke prevention and cooling drinks. 2.6 Safety production responsibilities of operators a) Responsible for formulating safety measures for test work and participating in safety knowledge education for employees; B) Operate the test instruments and equipment according to the operating procedures, and place the instruments and equipment and test supplies as required. 2.7 Technician's safety production responsibilities a) Participate in the preparation of safety technical measures and safety technical disclosure; Participate in the formulation of safety technical measures and safety operation procedures for high-risk construction tasks in the four new projects; B) Participate in production safety inspection; C) Responsible for targeted safety technology education in the "three-level" education of employees. 2.8 Responsibility of Material Engineer for Safe Production a) Implement the system of safe operation of material delivery, loading and unloading and warehouse. B) When using or transporting toxic substances and various dangerous goods, it is necessary to obtain relevant performance specifications, determine the scope of use, and issue them for use after putting forward the precautions for use. C) Check the materials and tools regularly, and recycle them in time if they do not meet the safety requirements, or report them to the superior for handling. D) Regularly check the safety protection of all kinds of material warehouses, and solve problems in time when found. E) Be responsible for the daily safety education of the personnel who transport and store materials. F) Distribute labor protection articles on time. G) Be responsible for checking the entry of labor protection articles and the safety status of seeds used. 2.9 the builder's responsibility for production safety a) accept the safety technical disclosure organized by the project department and participate in the safety technical disclosure of the team. B) Arrange each production process reasonably, strictly observe the discipline of construction organization, and avoid mutual interference; Reasonable arrangement of labor force, according to the characteristics of employees' body, age, technical proficiency and so on. C) In the process of construction, always check the safety production situation and correct the illegal operation of "three violations"; If unsafe factors are found, report to the person in charge of the site immediately; In case of emergency, first inform employees to leave the dangerous area, and take corresponding safety protection measures, and then report to the superior for handling. D) Have the right to refuse the leader's illegal command and force employees to take risks, and report to the superior leader in time. E) Supervise the team to implement the pre-shift safety speech and the system of "three inspections and one handover". 2. 10 shift leader's safety production responsibilities a) Carry out construction according to the requirements of shelf captain, technician and safety officer, and strictly implement rules and regulations and construction safety measures. B) Be responsible for the safety speech before class, organize the safety inspection before class, during class and after class, correct the illegal operation, and immediately do a good job of on-site emergency treatment and reporting when unsafe factors and emergencies are found; C) Arrange the production processes reasonably to avoid mutual interference; Reasonable arrangement of labor force, according to the characteristics of employees' body, age, technical proficiency and so on. D) Be responsible for the handover work and keep the handover records. E) Be responsible for organizing regular safety education and training for employees of this class and supervising the correct use of labor protection articles by employees of this class; F) Have the right to refuse the illegal command of the leader and the instruction to force employees to take risks, and report to the superior leader in time. 2. 1 1 operator's responsibility for production safety a) consciously obey the organization arrangement of the builder and the team leader; B) Use labor protection articles correctly and operate in strict accordance with work instructions and safety operation procedures; Criticize unsafe behaviors at any time and report to the monitor; Have the right to refuse illegal command and report to superior leaders; C) Take the initiative to receive safety education and training. New employees must receive "three-level safety" education, and they can only take up their posts after passing the training; Special operations personnel must hold relevant certificates. D) Always check the tools, equipment and working environment you use, and report the unsafe factors to the monitor, the safety officer on duty or the leader of the project department in time. 3 working procedures and requirements 3. 1. 1 Establish a safety management leading group. Shelf team set up a construction safety leading group, which is the safety management organization of the team. Team leader of safety leading group: team leader, deputy team leader: branch, technical supervisor and vice captain, and team members: safety officer, technician, quality engineer, material engineer, tester, foreman, foreman, etc. 3. 1.2 Establish and improve the safety management system, divide responsibilities and authorities, sign safety responsibility letters with the operation team, and establish a safety reward and punishment mechanism. According to the safety management system and engineering characteristics of the project department in the work area, the shelf team should further refine, formulate corresponding safety management systems, clarify responsibilities, implement the safety management responsibility system, timely assess and cash rewards and punishments. 3. 1.3 Conduct security analysis and hold regular security meetings. 3.2 job requirements 3.2. 1 safety technical measures 3.2. 1. 1 before the project starts, the team leader and technical director shall organize technicians, safety officers, builders, material engineers, electromechanical technicians and team leaders to confirm this according to the results of hazard identification and evaluation released by the project department and the determined high and medium risks, combined with the construction characteristics undertaken by the team. During the construction period, according to the changes in the construction site and the existing safety problems (especially the recurring problems), update the high and medium risks and their hazard sources in time. 3.2. 1.2 In view of the high and medium risk of our team, the technical director shall organize technicians and safety officers to prepare (or obtain from the project department) special construction plans, safety technical measures for main processes, work instructions, types of work of main machines and equipment, and safety operation procedures; According to the high school risks and their hazards, determine the dangerous posts and formulate detailed operating procedures for dangerous posts. 3.2. 1.3 in view of high-risk accidents or emergencies, combined with the emergency plan issued by the project department, the technical director shall organize to refine or supplement the emergency measures of the team, especially the emergency procedures and emergency rescue methods of front-line operators. 3.2. 1.4 The special construction scheme, safety technical measures, work instructions, safety operation procedures (including operation procedures for dangerous posts) and emergency plan organized by the scaffolder team shall be signed by the preparer and reviewer, and implemented after being approved by the project department. 3.2.2 Safety Technical Disclosure 3.2.2. 1 After the operators enter the site, before the start of construction, the technical director shall organize technical personnel and safety officers to make written safety technical disclosure for the construction personnel, shift supervisors and shift operators in terms of disciplines or processes and main types of work. For the transferred personnel and workers who enter the site sporadically, corresponding safety technical disclosure can be made in combination with pre-job safety education. 3.2.2.2 safety technical disclosure content must be complete and targeted. The disclosure shall at least include sub-items or processes, main types of work, main hazards of dangerous posts, special safety technical measures, safety operation procedures (including those for dangerous posts), emergency methods, etc. , and inform the main hazards in operation, the correct operating procedures, requirements, precautions, emergency measures in case of emergency and the hazards of illegal operation. The contents of all kinds of safety technical disclosure in 3.2.2.3 must be recorded on the unified printed form, indicating the project location and time of disclosure, and signed by the disclosure person and the person being disclosed. Each disclosure form shall be held by the disclosing party and the disclosed party respectively. 3.2.3 Safety education and training 3.2.3. 1 According to the construction organization arrangement and personnel mobilization plan of the team, the team leader shall preside over the formulation of the team-level safety education and training plan, which shall be incorporated into the overall training plan of the team and published in writing. Safety education and training should include pre-job safety education and training, special safety technology training, special operations personnel training, regular safety education, etc. 3.2.3.2 team-level safety education and training shall be organized and implemented by team leader, technical supervisor, technician and safety officer. , the operator can only work after passing the examination; Education and training account should be established, and education and training materials should be filed in time. The main training contents include: a) the construction characteristics of the team and the basic knowledge of construction safety, including the basic knowledge of working at heights, mechanical equipment, electricity safety, fire prevention, disinfection, dust prevention and riot prevention, and the knowledge of safe handling and evacuation in case of emergency; B) Safety management system, regulations and matters needing attention of the team; C) Process safety technical measures and safety technical operation procedures; D) Basic knowledge of distribution standard and use of protective equipment. E) accident cases, etc. 3.2.3.3 team daily safety education is organized by each team monitor. The main contents of the training include:

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd