The first lesson of starting work: 5 personal comments.

In order to do a good job in the safety production of production and business units that have resumed work, effectively improve the safety quality of employees and ensure the safety of returning to work, the Provincial Safety Committee Office organized a special lecture on "the first lesson of starting work". The following collected five articles, telling my personal feelings about the first lesson of starting work. I hope I can help you.

The first lesson of starting work, personal feedback, article 1

Safety is everyone's innate consciousness, but people have different understandings of the scope and importance of safety. By studying the safety images of our department, many safety production and fire accidents come to mind. The siren of every accident is so exciting, and every painful accident will leave permanent pain in the hearts of the relatives concerned. By studying and training safety knowledge, we are constantly strengthening our safety awareness, and we can deeply understand the importance of safety, which is closely related to life and property. Therefore, safe operation is everyone's responsibility and obligation.

We should draw lessons from safety accidents and keep a high degree of vigilance, and always think that as our catering industry, we should strengthen safety awareness in those aspects, how to strengthen safety knowledge learning, and implement operational drills of preventive measures, so that everyone should be familiar with safety operation skills, and should abide by the concept that prevention is more important than disaster relief and responsibility is more important than Mount Tai.

However, in real life, some people always show their cleverness. They are happy to break the rules again and again according to their own experience without problems, and even teach others their experience at the expense of their own personal experience, which will eventually plant a time bomb of security risks! We must correct these careless misconceptions and don't leave any luck in safety.

Safety is not a verbal commitment, but a practical work attitude. Therefore, we must start from the details, pay close attention to every link chain, and implement it until people are in place. Rules and regulations are not only for people to learn and remember, but also need to be reflected in practical work.

In short, it is necessary to eliminate ideological obstacles such as resisting negative violations, slacking off and showing off by luck through the awakening of many safety accidents, so as to enhance our safety awareness.

The first lesson of starting work, personal feedback, the second part

202 1 The pace of the Spring Festival has gradually drifted away, and some people may still be immersed in the festive atmosphere. It is necessary to give employees the first lesson after the festival, make a good start and do a good job in safety education. On March 5th, the Power Workshop of Fengshan Chemical Company of the Chemical Division held the "First Class of Starting Work" after the festival.

The first lesson "talking" is conducive to starting work. By talking about safety, we can let workers know where and what is dangerous in their daily construction work and how to stay away from it. By constantly ringing the alarm, we can let safety awareness enter our ears, brains and hearts. Only when we have safety awareness can we create a safe working environment. At the same time, in view of the situation that individual employees' safety awareness is weakened and their thinking is paralyzed, we should seriously rectify "this hidden danger, that hidden danger and ideological hidden danger are the biggest safety hidden danger" through "heart-to-heart talk", firmly establish "red line awareness", consciously practice the concept of "zero tolerance", strengthen employees' safety awareness and build a solid ideological defense line for safety production by strengthening responsibilities and tightening safety switches.

The first lesson of "doing" is beginning. Through "doing", employees can develop good safety habits, master the necessary preventive skills, and get out of the "annual flavor" atmosphere. Don't be distracted at work, but concentrate. Through "doing", employees can develop good safety habits and effectively prevent the occurrence of safety accidents. At the same time, employees can master the necessary prevention skills, actively save themselves in case of accidents, and minimize the harm.

Let's begin the first lesson "Check". Do a good job of safety inspection through "big inspection" In the inspection, we should "not let go of any hidden danger or any dead angle". Only when the operation conditions are met can the construction be carried out. If the safety conditions are not met, we must never take the "sick" operation. We should educate everyone to actively protect safety in production, monitor and focus on prevention throughout the process, and strive to be a solid screw on the safety firewall.

Start the first lesson on the first day, build a solid ideological defense line for employees, weave a solid safety production protection net, and keep "safety in mind, carry it on your shoulders, and implement it in practical work" to walk with us safely.

The first lesson of starting work, personal feelings, the third chapter

Safety concerns all aspects of our lives. It is our responsibility to emphasize safety. Recently, the factory department has conducted many in-depth safety knowledge trainings and examinations for employees. After learning these safety knowledge and video cases, it has had a profound impact on me, which will never be erased. ...

It is precisely because of these safety accidents that I understand that in daily production, we should strengthen our awareness of self-prevention, improve our ability to prevent accidents and improve our execution.

As a member of the company, I realize that we should create an atmosphere of "everyone is safe, everything is safe and always safe", and always adhere to the policy of "safety first, prevention first". In the normal production process, we must abide by the relevant "safety technology operating rules", constantly carry out safety education and training, eliminate fluky psychology, and understand and master the necessary emergency safety protection measures. In daily production, we should actively respond to the inspections, regulations and inspections of safety units at all levels, so as to make self-examination and rectification from time to time, learn from time to time and pay attention to it from time to time.

After this safety examination and training, as a team leader, I have made my goal more clear: for the safety of my work and the happiness of my family and colleagues around me, in my future work, I will start from small things and start from the side, and urge employees to seriously implement the Technical Regulations for Safe Operation, fundamentally put an end to the phenomenon of "three violations" and make efforts for safe production!

The first lesson of starting work, personal feedback, article 4

At present, the production and business units in the province are in the stage of resuming work. In order to tighten the string of safe production at all times and effectively prevent accidents, the Emergency Management Department of Hebei Province organized a safety lecture on "Building the First Lesson" in the whole province on February/February 15, 2007.

"What is the particularity of the safety of returning to work? What is full-time security control? How to develop safety habits? " In Shijiazhuang Junlebao Dairy Co., Ltd., Liu Hongde, a senior engineer of Hebei Safety Science and Technology Center, gave a vivid on-site class to more than 200 employees in Junlebao. All production enterprises in the province organize cadres and workers to watch online simultaneously through the webcast platform.

The Provincial Security Committee Office requires that all units at all levels should choose their own time to watch the "First Lesson of Construction" in real time for special reasons. All localities should make careful arrangements, carefully organize and continuously carry out relevant training and education to ensure that production and business units carry out production and business activities under the premise of safety.

The first lesson of starting work, personal comment, article 5

"Safety is the foundation of life, and violation of regulations is the source of accidents". Safety is an eternal topic, and safe production is an important guarantee for the survival and development of enterprises. In the safety production activities of enterprises, people usually refer to the requirements of managers for employees' safety standards as "I want to be safe" and the conscious safety behavior of employees as "I want to be safe".

1. Responsibility in place. As the first person in charge of production safety, leaders should personally check the preventive measures and rules and regulations of production safety.

2, publicity in place, make full use of publicity columns, safety banners, LED and other media as propaganda means, in the unit to create an atmosphere of "everyone should be safe, everyone should be safe".

3. Measures are in place, and the key point of doing a good job is to start with details and focus on small things. Any small mistake and negligence may cause safety accidents, and the levee of a thousand miles is destroyed by the ant nest.

4, put in place, all departments should attach great importance to, layers of implementation. We must unswervingly implement various rules and regulations.

Undoubtedly, the standardization of operation in front of the furnace is the basis of ensuring safe production. All blast furnaces and employees carry out skills training and competitions, and discuss and learn from each other. For example, various blast furnace workshops in the factory department carry out skills competitions in front of the furnace to enhance the enthusiasm, organization and cooperation of the team. Use the "one-shift" training to train the precautions for replacing drill pipes, wear labor protection articles correctly, and prevent the drill pipes from being scalded; The operator should take good care of the hydraulic system of the opening machine to avoid mechanical damage caused by misoperation of the opening machine; Before unloading the lever manually, make sure that all actions of the opening machine have stopped. Through the study, the operation skills of team work are improved, the safety awareness of employees is strengthened, and the feasibility guarantee for safe production is provided.

The responsibility for safe production lies on the shoulders. Enterprises always adhere to the concept of "people-oriented, safe production", and no major safety accidents have occurred in recent years, which proves that enterprises have a complete plan for safe production and resolutely abandon the wrong idea of "emphasizing production and neglecting safety". Only when you learn how to be safe can you be truly safe. Only when the sense of responsibility and safety awareness complement each other can the safety behavior be conscious and concrete, and the safety production can be effectively carried out; Only when everyone develops good safety work habits can we really eliminate potential safety hazards, avoid illegal operations and improve safety efficiency. Life is short and fragile, precious because it is short, and cherished because it is fragile. Safety comes from vigilance, and accidents come from paralysis; If you have more responsibilities, your family will feel more at ease. Let us always remind ourselves that safety is above everything else! Safety comes from good work habits!