What are the characteristics of Anwar faucet?

There are all kinds of faucets, and different brands have different functions and performances. Before buying, you should know more about the selection and installation of faucets. The following is the characteristics of Anwar faucet and how to choose and install it. You can choose the faucet according to these details and go to the faucet shop to choose the faucet suitable for the decoration style.

1. What are the characteristics of Anwar faucet?

1, water-saving and energy-saving Anhua faucet is a very water-saving and energy-saving faucet, reaching the national faucet output, about 9 liters/minute. Therefore, the purchase of Anhua faucet can also save hundreds of yuan in water charges for one year.

2. Easy maintenance, scale prevention and no blockage. If the faucet with poor quality is easy to produce scale, it will be blocked after a period of use, and the water flow will not be smooth, while Anhua faucet will not scale, block and need no maintenance.

3. Health and safety Anhua faucet is a very healthy and safe faucet. The products are mostly made of all copper and the quality is guaranteed, so there is no need to worry about safety.

4, easy to use Anhua faucet is very convenient to use, because its outlet pressure and water volume are suitable, and it needs to meet the market demand of users. Moreover, Anhua faucet has a variety of water outlet modes, and the design is very humanized. It can adjust different water outlet modes at will, which is not only convenient to use, but also allows people to experience life experience.

Second, how to choose the faucet

1, weighing. Most faucets are made of pure copper, so they are relatively heavy. If you hold them in your hand, you will feel heavy and full of weight. Due to the limited cost, it is difficult for inferior products to have the same material and weight.

2. Look at the appearance. Most faucets are finely processed, and the surface metal coating has a good finish, which is close to the mirror effect. Seen from different angles, the reflected curve is smooth.

3. Turn the handle. Gently turn the handle of the faucet, you should feel that there is no gap between the faucet and the handle, the switch is free, the resistance is appropriate, but it will not slide.

4. Listen to the sound. A good faucet should be made of cast copper as a whole, and it sounds dull when knocked. If the sound is crisp, it is stainless steel, and the quality is one grade worse.

5. Look at this sign. For faucets produced by regular manufacturers, the detailed address and contact information of the manufacturer should be clearly written on the box. The products of informal manufacturers or fake and shoddy products often have only some paper labels, and the address of the manufacturers is mostly not specific, so you must pay attention when buying.

Third, how to install the faucet.

1. Before installing the faucet, you must flush the water, clean the sediment and impurities in the water pipe, remove the impurities in the installation hole, and check whether the accessories in the box are doped with impurities to avoid blocking or wearing the ceramic valve core.

2. No matter where the water pipe is installed, connect the water pipe with a metal hose. Put the faucet hose into the faucet mounting port and tighten it by hand. Try pulling to see if the connection is firm. Then fix other fasteners that need to be assembled before fixing to the faucet.

3. Then pass the assembled faucet hose through the basin, connect the fixing pieces, and then fasten them with screws. Pay attention to debugging during the period to see if the faucet and basin are connected tightly and loosely.

4. After fixing the faucet and basin, put the basin in a fixed position, and then connect the other end of the hose with the water inlet pipe interface. When taking over, if you divide hot water and cold water, remember that hot water is on the left and cold water is on the right. This basically completes the installation.

The above is the introduction of Anwar faucet for everyone. You can negotiate the style and brand with the designer. After all, you have rich experience in this field.