Safety warning slogan for residential clothes hangers

There are many types of clothes hangers on the market, but according to their stretching function, there are only three. One of the most common is the balcony lifting type. In addition, there are wall-mounted and floor-mounted petty bourgeoisie styles that are more suitable for the north. The following is to introduce the selection, advantages and disadvantages of various drying racks for you. The floor-standing clothes rack suitable for single people to rent is the most classic and fancy. Classical is its shape, completely out of the earliest clothes rack-two pillars and a crossbar; What is fancy is its appearance, high and low parallel bars or X-shaped with wings, which spread out like a pair of flying wings. This kind of clothes rack is very convenient to assemble and disassemble and occupies a small area. The wing-shaped clothes rack can be folded freely and can be placed in the space behind the door when not in use. If you are a renter, it happens that the landlord has not installed a lifting hanger, you can consider it. Because the other three types of clothes hangers are installed, it is inevitable to drill holes in the landlord's wall or ceiling, which makes the landlord unhappy. Another biggest advantage is that you can move out at any time when you move, as long as it can still be used. The biggest advantage is that you can move indoors in rainy and humid seasons, close doors and windows, and clothes are much drier than hanging outdoors. At present, the latest floor drying rack with electric heating function can dry clothes, but it is rare in the market. Tips for buying: No matter the parallel bars or the wings, the load bearing can't be compared with the other two types of hangers. The parallel bars take up a lot of space, but they can be lifted in a short distance. But now the products on the market are basically plastic connectors, which are convenient but not firm, and may fall apart if you are not careful. If the wind is strong, there is still the danger of being blown down by the wind. The stability of wings is very good, but the balance of wings should be considered when drying clothes. Wall-mounted hangers suitable for the north or sun room are not widely used in the south, but they are more suitable for use in the north. Because most houses in the north are closed balconies, and the climate is dry, and there is heating in winter, clothes will soon dry out if they are dried at home all day without sunshine. As the name implies, the wall hanger is installed on the wall and does not occupy a position. Among them, the folding type is installed on a person's chest, which is somewhat similar to the towel rack in the bathroom, but much larger. When you put it down, it will stick to the wall and take up no space. Pick up the clothes when they are hanging. The other is the stretching type, which is also installed on the wall. It can be pushed on the wall at ordinary times and pulled out to hang clothes when in use. If you decide to choose the wall-hanging type because the floor-standing type is too shabby and the lifting type is too common, congratulations on having a sun room or villa. The most suitable places to hang clothes racks are sun rooms and villas. Floor-standing hangers are temporary products as long as they are placed on the ground; The lifting clothes rack must have at least one top to be installed, which can be used for 5 years and belongs to semi-permanent products; Wall-mounted can only be installed on one wall. It is a permanent product with a good quality of 10 years. Most importantly, the wall hanger can completely put clothes in the sun, and the delicious taste is fascinating. However, the folding suspension is too short and unsightly.

Tips for buying: At present, the common material on the market is galvanized steel pipe with plastic-sprayed surface; There are also stainless steel, all-aluminum alloy and aviation aluminum. It is recommended to choose the material of aviation aluminum, which should be smooth when stretched, and it is best not to have screws at the joints. Some quality problems of the lifting type are that the crank is stuck, some wire ropes are rusted and broken, some pulleys are rusted, and some top seats are oxidized, which will be replaced in a year or so. Lifting hangers do have many advantages. The development of clothes hangers makes life comfortable and elegant. Gently shake the lifting hanger, the hanger will slowly come down, hang the clothes, and then gently shake, the clothes will be dried, which completely subverts the action of drying clothes that people have been doing for hundreds of years. Soothing and elegant, it is definitely a classic action of temperament women. On the surface, the lifting clothes rack has no technical content. A crank, two air poles, two steel wires, two pulleys and four top seats. How many skills can you have? Actually, it is not. Why can some of them only be used for one year and some can be used for five or six years? The key is material and installation. Clothes drying rod is the main part of lifting clothes rack, and its thickness is the guarantee of bearing capacity. There are stainless steel, electroplated aluminum and Al-Ti-Mg alloy on the market. Select drying rods or imported stainless steel pipes with the thickness of Al-Ti-Mg alloy above 1.2 mm.. Handle is the core component of lifting clothes rack. Don't buy a plastic handle because it will go bad. Preferably an integrated handle. Although you can't see the bearing inside, you can turn it to see if it is light, anti-shake and noise-free. Pulley is the main transmission part in the lifting process. The pulley quality is not good, and the wire rope is easy to jump off, resulting in jamming or winding. Therefore, try to choose a universal copper bearing pulley with flexible rotation, and also have a device to prevent the wire rope from falling off and jumping. Rust resistance and flexibility of steel wire rope are the first choice. High-quality products use ultra-thick galvanized steel wire rope or stainless steel wire rope, which has oily cotton core, corrosion resistance and is not easy to rust. The top seat is a force transmission component, which is directly related to the service life and appearance of the product. The products on the market are also the most miscellaneous, including plastics, zinc alloys, iron sheets and aluminum-titanium alloys. Of course, the best is high-quality aluminum-titanium alloy, and with advanced surface technology, it will not rust, oxidize, never explode, and be as durable as new. Tips: No matter what type of clothes hanger, the material is always the most critical. It is worth noting that 70% of the failures of hangers are caused by improper installation.