What color reflective sticker is suitable for white cars?

Black is the first choice and versatile. Secondly, it is suggested that gold, dark green, dark blue and brown are all suitable for white cars.

Stick it on the side along the upper car board or the lower car board, and each interval can be 10-30 cm, and stick it around the back of the car board, and each interval can be 10-20 cm!

The car body reflective logo has the following outstanding advantages: wear resistance, scratch resistance and impact resistance. Resistant to washing, gasoline, diesel and other solvents. Good flexibility and simple construction.

The uniquely designed adhesive has the characteristics of high strength, low temperature resistance, non-corrosion of paint surface and repeated pasting. This product has super-reflection performance and good wide-angle performance. Good weather resistance, normal performance at -40℃-70℃.

1 The body reflective logo is made of strip reflective material with alternating red and white units. The unit length ratio of two color materials should not be greater than 2 or less than 0.5, and the continuous length of any color material should not be greater than 450mm or less than150 mm.

2 The width of body reflective marking material should be selected from the following values: 50 mm, 75 mm, 100 mm.. When some types of vehicles can't paste the 50-mm-wide body reflective logo, two 25-mm-wide body reflective logos can be pasted in parallel.

3 N2, N3, full trailers and semi-trailers shall be equipped with body reflective signs at the rear. The reflective sign of the rear body should reflect the rear width of the vehicle, and the minimum height from the ground is 380mm. When the first-class car body reflective sign is used, the sum of its area with the rear reflector should not be less than 0.1m2; When using the secondary body reflective sign, the sum of its area with the rear reflector should not be less than 0.2m2.

Cars, trains and trucks with a length greater than or equal to 10m shall be provided with body reflective signs on the side. It is allowed to interrupt the side body reflective signs, but each continuous part should be longer than 300mm and contain at least one unit of red and white body reflective signs. The total length of the side body reflective signs should not be less than 50% of the vehicle length, and the sum of their areas with the side reflectors should not be less than 0.2m2 per side.

Car body reflective logo, also known as car body sticker, has super reflective effect, which can help identify the model, size and outline of the vehicle at night, improve the day-and-night visual recognition effect of the vehicle and greatly improve the safety factor of the vehicle. It is mainly used for reflective signs of freight motor vehicle bodies and warning signs of dangerous goods transport vehicles, and is a personal guardian of vehicle safety. Specifications and dimensions:

5cm×50m, and the spacing between red and white is 15cm. Can be customized according to customer requirements. How to use:

1. Clean the parts with radiation reflection signs, and keep the job site clean without dust, oil stains, rust and warping paint; 2. Wash with non-corrosive solvent, then rinse with clear water and wipe off water stains with clean soft cloth; 3. Tear off the back paper, stick it on the designated position gradually and evenly, and flatten it with an instrument; 4, humidity is greater than 50% or rainy weather should not be pasted.