How to write a special report on hidden danger investigation

How to write a special report on hidden danger investigation

In order to further strengthen the construction management, effectively eliminate potential safety hazards and prevent the occurrence of safety accidents, the construction unit organizes the supervision unit and the construction unit to carry out safety inspection activities and carry out hidden dangers investigation and management activities on the construction site. The self-inspection of production safety is now reported as follows: 1. Safety management.

1, establishment and improvement of safety organization.

The project department has established a safety management network with the project manager as the first responsible person, as well as a safety production responsibility system and a safety management system. The quality and safety department of the project department was established, and full-time security officers were responsible for the on-site safety patrol inspection. The labor service company was equipped with full-time security officers to be responsible for the safety inspection of the construction site, forming a top-down safety assurance system.

2, the implementation of safety management system and responsibility system

In order to ensure the safety in production, the project department has formulated a detailed safety work plan and guarantee plan, formulated a safety management system, and strictly implemented the safety education system and the safety regular meeting system. , formulated the emergency plan for major safety accidents, formulated the responsibility system for production safety, and clarified the safety responsibilities of various departments and posts. At present, the project department has more than 10 safety rules and regulations, which are complete and operable. Do system constraints, system managers, constantly check the implementation of various safe and civilized construction systems, and correct problems in time when found. Continuously improve the execution of safe and civilized construction system, strengthen the management of safe and civilized construction, and prevent accidents.

3, safety inspection, hidden trouble investigation

In addition to daily safety patrol inspection, the project department also conducts comprehensive safety inspection and special inspection on a regular basis according to the work plan, and timely rectifies and improves the problems and hidden dangers found out, or issues a notice of hidden dangers rectification, and makes rectification within a time limit. If it is unqualified, it will be punished according to the safety management regulations of the project department. In addition, according to the site conditions, prepare various safety warning signs and construction signs, and place corresponding warning signs at the entrance of the construction site, on scaffolding, near the access opening and electrical equipment to remind staff to pay attention to the safety protection of themselves and others and eliminate potential safety hazards.

4. Safety education and training

(1) The Project Department provides timely safety education and training to new managers and workers from time to time. With the development of construction, comprehensive safety education, training and assessment have been carried out for special operators one after another, so that workers can master the knowledge and skills of safety production in this position.

(2) Safety team education activities carried out by various construction teams.

(3) Make safety technical disclosure to workers in time. Strengthen safety education and safety technical disclosure, so that workers can understand and master the dangerous points and aspects of various construction operations, and work in strict accordance with operating procedures to avoid safety accidents.

Second, the site construction safety inspection items and inspection situation

1, whether protective measures are taken for aerial work and whether protective caps and ropes are worn.

At present, the construction site of this project does not involve aerial work.

2. Whether the external wall guardrail of the elevator shaft is missing.

There is no such project.

3. Whether the scaffold meets the mechanical requirements.

Scaffolding does not involve the current construction site of this project.

4, lifting goods, forklift handling goods, whether the operator fully understand the safety operation procedures.

There is no such project.

5, wall demolition work, whether there is removed from the bottom.

There is no such project.

6. When there is lifting operation at the height, is there someone standing nearby to supervise?

There is no such project.

7, whether to install grounding line protection and grounding line quality.

There is no such project.

8, rainy days or when there is water on the ground, whether the workers engaged in electrical work wear insulating gloves and insulating rubber shoes.

All the workers work according to the safety operation rules.

9. Whether there are ungrounded electrical equipment, bare wires, switches, insurance, etc.

Meet the requirements of relevant specifications.

10, residual current action protection device is invalid.

There is no such project.

1 1. Does the elevator manufacturer have elevator manufacturing license, installation qualification certificate and other qualifications?

There is no such project.

12, whether the elevator safety protection device is missing or out of order, and whether it is put into use after acceptance.

There is no such project.

13, whether to arrange full-time personnel to operate the elevator, and whether there is a special equipment operation certificate.

There is no such project.

14. Is the elevator regularly maintained and found problems to eliminate hidden dangers in time?

There is no such project.

15. Whether there is overloaded transportation or illegal manned elevator.

There is no such project.

16, whether to formulate and implement elevator safety operation procedures.

There is no such project.

17, whether the speed limit sign is posted on the site and whether the wide-angle lens is installed in the corner of the site.

There is no such project.

18, whether to formulate vehicle safety management requirements on the construction site.

Meet the requirements.

19. Is there a phenomenon of building dormitories with foam colored steel plates on the construction site?

number

20. Is there a shower in the dormitory? Boil water quickly and charge the dormitory with an electric car.

number

2 1. Whether there are workers smoking in places where building materials are scattered and piled up.

number

22. The on-site fire control facilities are missing or expired.

number

23. Communicate with the gas group and water supply company before the rain and sewage diversion and road network reconstruction project starts to obtain the line drawings.

Before construction, we have communicated with relevant responsible units to ensure the construction of underground pipelines.

Three. Problems existing in safety management

(1) Individual personnel have weak safety awareness, and there are still habitual violations on the construction site.

(2) The building materials are scattered and need to be further standardized.

(3) Check the equipment regularly and improve various systems; However, the inspection data and records of the equipment itself are incomplete; Need to be further improved.

Fourth, the corrective measures taken

In order to ensure the safety of engineering construction and eliminate all kinds of potential safety hazards, aiming at the main problems existing in the process of self-inspection, the project department puts forward the following rectification measures:

1, the project department will strengthen supervision, conduct safety education in batches, educate and publicize safety knowledge and regulations for workers through daily inspections, inspections, meetings, safety education and training, etc., so as to improve workers' safety awareness and responsibility awareness and prevent safety accidents.

2. Continue to pay attention to the problem of electricity consumption in construction, strictly investigate the phenomenon of illegal electricity consumption in staff quarters, and arrange the on-site lines in a unified and standardized manner.

3, increase the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must improve employees' safety awareness ideologically.

4, improve and perfect the system, promote the comprehensive safety management work rules-based, put in place. Implement the responsibilities of all levels and departments in strict accordance with the safety responsibility system.

5, in a timely manner in accordance with the provisions of the project department, regularly carry out safety inspection and hidden trouble investigation and management, do a good job in the construction site safety hidden trouble search and rectification.

In short, through this self-inspection, we found some shortcomings and omissions in the safety work of the project department. The project department carried out rectification in time, which was effectively controlled, but the safety work is a long-term work. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of employees, better implement the work and requirements of safety management, further enhance the awareness of safety responsibility, clarify their respective responsibilities, and provide safety guarantee for the smooth progress of engineering construction.