Self-made pen container

Tools/raw material glue, art knife, pencil, several pieces of colored paper, ruler Step/Method Mark lines with a width of 0.5- 1cm on the edge of colored paper with a ruler, which will be used as the scale of paper cutting.

Press the ruler hard, and then cut the paper with a paper cutter to cut out a piece of paper 15-20cm long. Take out a piece of paper first, then roll it into a tight roll, and glue the edge of the paper roll with white glue until it dries.

Tip: At this time, you can also roll it up with a toothpick, and then carefully take the tightly rolled roll off the toothpick. In this way, 60 tight rolls are always made.

Repeat step 1-3, and then gently flatten one end of the paper roll by hand, thus obtaining a teardrop-shaped paper roll. According to five teardrop-shaped paper rolls, a paper flower is formed, and the teardrop-shaped paper rolls can make four flowers in total.

Two flowers and 24 tight rolls are used as one side of the pen container, while the other adjacent side of the pen container only needs 6 tight rolls. All the parts are stuck together.

According to the above idea, after all the paper rolls are combined, you can get a pen container for spreading paper. Unfortunately, the bottom of the pen container is not sealed. If you want to seal, you can make several paper flowers and stick them together to achieve the effect of sealing the bottom mouth.

Do you know that?/You know what? At the beginning of the 20th century, Jingdezhen porcelain painters in Jiangxi Province reformed the traditional pastel painting method and used pastel raw materials to draw Chinese paintings on porcelain, forming a famous porcelain painting school represented by "Eight Friends of Zhushan".

Do a 250-word pen container composition

On Sunday, after I finished my homework, I saw all kinds of pens everywhere on the desk, which looked messy. I made a 250-word pen container composition. Suddenly my eyes lit up and I made a pen container and put it away! I prepared an empty plastic bottle, a piece of white paper, a pair of scissors, glue, a red cardboard and a marker. I started doing it. I'll cut off the plastic bottle mouth first and put it aside. Then I drew a love on the red cardboard, cut it out with scissors and stuck it on the white paper. Then I drew some patterns in the blank of the heart with a watercolor pen. Finally, I stuck the patterned paper on the bottle body with glue, and cut off the excess parts with scissors. One. The composition for the second grade of primary school is "Make a 250-word pen container". Looking at the finished pen container, I feel that there is room for the pen and the desk can be neat. I smiled happily. Small lilac: Grade One and Grade Two in Panzhihua East District, Panzhihua City, Sichuan Province.

How to make a pen container

This pen container is a bit complicated, but it is absolutely pleasing to the eye. I'll teach you how to do it for a few minutes today.

Tools/raw material glue, art knife, pencil, several pieces of colored paper, ruler Step/Method Mark lines with a width of 0.5- 1cm on the edge of colored paper with a ruler, which will be used as the scale of paper cutting. Press the ruler hard, and then cut the paper with a paper cutter to cut out a piece of paper 15-20cm long.

Take out a piece of paper first, then roll it into a tight roll, and glue the edge of the paper roll with white glue until it dries. Tip: At this time, you can also roll it up with a toothpick, and then carefully take the tightly rolled roll off the toothpick.

In this way, 60 tight rolls are always made. Repeat step 1-3, and then gently flatten one end of the paper roll by hand, thus obtaining a teardrop-shaped paper roll.

According to five teardrop-shaped paper rolls, a paper flower is formed, and the teardrop-shaped paper rolls can make four flowers in total. Two flowers and 24 tight rolls are used as one side of the pen container, while the other adjacent side of the pen container only needs 6 tight rolls.

All the parts are stuck together. According to the above idea, after all the paper rolls are combined, you can get a pen container for spreading paper.

Unfortunately, the bottom of the pen container is not sealed. If you want to seal, you can make several paper flowers and stick them together to achieve the effect of sealing the bottom mouth.

How to make a pen container (picture) by hand

Preparation materials: used paper tubes, glue and colored paper.

1 First, we found several paper tubes with different heights, as shown in the figure below. 2, and then find a few pieces of colored paper, according to their favorite color to choose to match, as shown in the figure below.

3. Then use glue along one edge of the colored paper, without too much glue. 4. Then put the paper tube on the colored paper and roll it up from the beginning, as shown below.

5. Fix the seams of colored paper with glue after rolling up, as shown below. 6. Finally, decorate the favorite group on the paper tube. If you want to make a combined pen tube first, you can fix three paper tubes together, as shown in the figure.

.

How to make a beautiful handmade pen container, made of cardboard.

Point 1: clean short coke bottles, plaid cloth, lace, hot melt adhesive, scissors, needle and thread, and screwdriver.

It is worth noting that the short coke bottle is chosen because the high coke bottle has a high center of gravity and is easy to pour. It can be hung on the wall, as long as it is suitable for the length of storage items. Point 2: Remove the top half of the Coke bottle with a knife and start cutting at 0.5- 1cm on the label paper.

Use a screwdriver or other tools to punch holes evenly on the edge above the label paper. Here is a simple way to teach you. Heating metal chopsticks with hot sol will make holes faster, but be careful not to burn your hands.

Point 3: Cut the plaid cloth. The width of the cloth and the length of the cut part are 1cm, which is longer than the circumference of the coke bottle 1cm. Fold the plaid cloth away from the long side of the bottle, fix the position with a pin and sew the edge to make a hemp rope groove with elastic opening.

Point 4: Sew plaid cloth on the coke bottle, pass the needle through the small hole made in the second step, and sew several needles to make the coke bottle bear more weight. After sewing the cloth on the coke bottle, remember to sew the seam on the short side of the cloth.

Point 5: Cut the lace into the same length as the circumference of the coke bottle, and stick the lace at the joint between the cloth and the bottle with hot melt adhesive to hide the traces of needle and thread sewing and beautify the appearance of the pen container. After pasting the lace, wait for the hot melt adhesive to dry a little before proceeding to the next step.

Sixth point: put the pen in the pen container to test it, and then put a small hemp rope on the hemp rope groove made in the fourth step as the bullet hole, and tie the bullet hole tightly to prevent dust from falling in. Hemp rope makes the British atmosphere more intense.

If you have a friend in need, you can also hang a rope on the pen container, which is more convenient to hang on the wall. Make a simple, lovely and strong pen container. If it is dirty, don't bother to replace it. Flexible use of common waste products at home will make our life more environmentally friendly and low-carbon.

Besides pens, you can put other decorations to decorate your home. Of course, the decorations should not be too heavy. For many writers, a small pen container is usually not enough. For families with children at home, a single pen container is not enough. You might as well make a practical and beautiful combination pen holder yourself.

The more complicated the manufacturing process of the pen container, the better.

Production method:

1. The cardboard is cut to size: 20* 15CM to make a pen container, and the bottom of the pen container is fixed with transparent tape. I chose to use the toothpaste box directly instead.

2, 9.5CM+8.6CM+9.5CM+8.6CM wide and 4. 1CM high, combined with scotch tape to form a drawer, and added the bottom to make two drawers.

3, 5.6 cm+10cm+10 cm+10 cm+5.6 cm wide,10 cm high, combined with transparent tape into the main body, stuffed into "back" cardboard.

4. According to the size of the main body, make two "drawer partitions", fold them inward into an N-shape, and fix them with white glue on both sides.

5. Make a roof with a width of 8CM+8CM and a height of 13CM, and cut out the position where the pen container can be inserted.

6. Stick a piece of cardboard on the bottom of the main body to make the thickness consistent. The wrapping paper should be attached to the periphery of the main body first and cut at the corners. Then stick the inner wall of the main body inward and cut four corners. Stick the side edge inward first, then stick it back and forth, and stick it to the top appropriately in the same way.

7. Cut a square wrapping paper and stick it on the top of the main body, cut the center with a knife, stick it inside in order, and then stick it on the bottom.

8. The roof, drawer and pen container are respectively pasted with wrapping paper.

9. Drill two small holes with the spacing of 1.6CM in the front of the drawer, take three beads and thread them into the iron wire, then thread them into the drawer from the front, fold them inward in the drawer and fix them with adhesive tape.

10. The roof is fixed on the top of the main body with double-sided adhesive tape, and the pen container is fixed in the concave position with double-sided adhesive tape. Just stuff it into the drawer.

How to make a beautiful pen container by yourself? /?

You can use a tissue tube, wrap it in some beautiful wrapping paper or stick it with beautiful cloth, or cut some small petals with colored paper and stick them on it, or make some bows with cloth, or make patterns you like. You can also cut off half with a beverage bottle, or cut off half with a can, or cut off half from a milk box with a knife, and then use colored paper, or wrapping paper or beautiful cloth such as a tissue tube. There are many beautiful flowers on Taobao. Colored paper stationery stores sell it, and you can also buy some special paper to make special lines. For example, if you want to be more beautiful, you can go to Taobao to buy Japanese Chiyoyo paper, which is super expensive but super beautiful. If necessary, you can decorate it with some pigments, or stick some beads or sequins to give it a shiny feeling. Because there are too many patterns, you'd better tell me what kind of colors, patterns, themes and so on you like.

Steps of manufacturing method of pen container

Empty and clean cans (28 ounces)

Drawing paper (12* 18 inch)

scissors

Zhang Xiao white paper

Color marker pen

glue stick

Class photos

Color hand-made adhesive tape

20# wire (length 15 inch)

postcard

Exercise:

1. Carefully peel off the logo on the can, use it as a board, and cut out a slightly larger rectangle on the art paper.

2. Cut a piece of Zhang Xiaobai paper, write your blessing and stick it on the previously cut drawing paper (near the middle).

3. Cut out the class photos and stick them on the drawing paper at will. Draw some flowers next to each photo with colored pens, and then draw roots and leaves. Wrap the painted paper on a can and stick the edges with a glue stick.

4. Stick colored tape on the top and bottom of cans and bottles.

5. Roll the wire into a whirlpool, cut a 3*5 inch drawing paper, wrap the postcard with it and seal it with a small sticker (or stick it with a glue stick and draw some decorations). Insert the wrapped card into the wire, and then fill the wire with a paper tube filled with pens and pencils.