How to install the cabinet? Example of wardrobe and cabinet installation

In our daily home life, we will buy many cabinets, which may be TV cabinets or bathroom cabinets in the living room. They can not only play the role of aesthetic decoration, but also play the role of storage and storage. However, these cabinets are often not installed at the time of purchase, but some scattered accessories need our manual operation. So how should we install cabinets? What precautions should be paid attention to in the specific operation process? What I recommend for you today is the process steps, including suggestions and skills, which I believe will be of some use to you.

First, how to install the cabinet?

First of all, the back panel of the cabinet must be made of wood with a thickness of 9mm (or more). After determining the installation position, first drill holes around and in the middle of the cabinet back plate by hand.

Then drill a hole on the wall at the corresponding position with an impact drill and add a wedge; The position of drilling holes in the wall with an impact drill must be the same as the position of the holes in the back panel of the cabinet.

Then screw it in with a tapping screw aiming at the position of the wedge. The number of drilling holes depends on the size and weight of the cabinet. Generally, there are more holes on the top, and the holes on the bottom are mainly used to fix the position, so you can make fewer holes.

Second, how to install the fabric wardrobe?

Check the package

First of all, when you receive the goods, whether it is express delivery or direct purchase, you must check whether the packaging is seriously damaged. If so, the steel pipe inside is probably crushed, so you must never sign for and buy such goods. Be sure to check it out.

Check accessories

Open the package, and then check whether the accessories inside are complete. There is an instruction book. Check it against the instructions. If it is less, it is estimated that it can't be packed without packing. Therefore, count clearly in advance to avoid waste. When installing, please be sure to wear gloves and read the instructions carefully.

Install the bottom first.

First, install the one with a gap at the bottom, take out the four-way joint with a high bottom and connect it with the short pipe in the middle. Then install four-way joints on both sides, then install pipes on both sides and decide where to put them. Then install the base cloth on both sides at the same time, and then install a tee joint around them.

Wardrobe cloth cover

After installing the bottom, insert six short steel pipes, and then put the whole wardrobe cloth on the holes around it. Then put a partition like the bottom on the six steel pipes.

Short edge floor

If the wardrobe is divided into two sides, first install the short-side floor, first insert the side steel pipes, then install the partition cloth, then connect the four-way joints, then install two horizontal steel pipes, then install the partition cloth, and then make up the four-way joints on both sides. Repeat the installation of the partition until it is installed on the top floor.

Long-side steel pipe

After installing the short-side partition, the long side is a vertical clothes hanging area, and the middle is connected with two long pipes through a tee to the top.

Top-mounted steel pipe

After the two sides are installed, they are directly connected with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high to be squeezed, it is recommended to push it sideways to avoid being installed. At the same time, the clothes hanging steel pipe can also be installed with hook joints, which is relatively simple.

Wardrobe cloth cover

When the big cover is at the top, it is best to pull the bottom to the top, so that there is room to pull it to the upper corner of the diagonal installation. At this time, you can pull down the cloth cover. So the wardrobe is installed. After installation, I feel that the whole wardrobe is so big, almost like Bian Xiao. It took an hour to install it. As long as you are careful, you won't make mistakes.

Tips:

When installing, plug in the short pipe that needs to be wide first. When installing four tubes, it is best to install the wide side of the wardrobe first, and then install the long side, which is convenient for installation, otherwise the width is limited and it is not convenient for installation. The length can be extended, but the width cannot be extended. Remember!

What is highly recommended above are the suggestions and skills in the installation process of bathroom cabinets or wardrobes and some TV cabinets. From this, we can know that, generally speaking, whether we buy cabinets from physical stores or online, we will receive some scattered accessories. We need to install according to the instructions. In this process, we should first measure and calculate to determine whether they are consistent with the area structure of the room. Secondly, we should choose the appropriate size and some corresponding tools and materials. With the help of auxiliary equipment, we can achieve satisfactory results, and we should adjust them in time after successful installation.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~