How to write a self-inspection report on potential safety hazards (selected 6 articles)

How to write a self-examination report on potential safety hazards 1

School safety work is a major event in school work and the top priority of school work. Our school has always attached great importance to safety education , often confused about safety work. According to the spirit of superior documents, our school has established a safety hazard inspection and self-inspection team, headed by the principal and composed of members from the Safety Office, General Affairs Office, etc., and conducted a detailed and in-depth inspection of all aspects of the school's work. Through the inspection, we believe that the school Safety work has been carried out meticulously and solidly, and certain results have been achieved, but there are indeed some problems that cannot be ignored. The self-examination situation is now reported as follows:

1. Guarantee of conditions for the start of school:

Our school can start classes and classes on time. All teachers and students of the school return to school on time, and no students drop out of school. Before the start of the school year, our school has carried out maintenance on each functional room of our school to ensure that each functional room can operate normally. At the same time, we have also carried out maintenance on the school's network, multimedia and other teaching equipment and living facilities to ensure that the teaching equipment can operate normally. Normal use. Secondly, in order to better carry out campus safety education activities, our school has put the "Code for Primary and Secondary School Students" on the wall and screen, and scrolled it on the campus big screen. At the same time, each class held a themed class meeting on safety precautions. Finally, our school has also implemented the national student financial aid policy.

2. School building safety management:

Before the start of the school year, the Safety Office has conducted an inspection of our school buildings and found no school buildings with potential safety hazards. At the same time, since our school does not have tap water in the canteen, there is no inspection on the safety, hygiene and epidemic prevention of food and drinking water in the school.

3. Campus safety management and safety education:

Our school strictly implements the construction of "three defenses", and human defense, physical defense and technical defense are all in place. At the same time, the school attaches great importance to campus safety management and education. Our school arranges security and duty personnel to be on duty every day to ensure the safety of the campus. Therefore, there have been no illegal intrusions into the school that resulted in student casualties or student drowning. accidents, as well as school bullying and violence management.

XXXX Primary School

How to write a self-inspection report on potential safety hazards on August 26, 2021 2

In order to better implement the Municipal Education Bureau's "About We conscientiously eliminate safety hazards and do a good job in safety work in the winter, summer, and autumn gardens, further standardize and improve various systems, and establish a safety work ledger. At present, the school is safe and stable, and the teaching order is in order. The school's safety inspection in May is as follows:

1. Publicity and education

In accordance with the spirit of the document and the principal's instructions, we will further implement rectifications, improve the system, and clarify responsibilities. We first carried out publicity and education. The school's political and educational office and safety and security department used flag-raising ceremonies, campus broadcasts, bulletin boards, class blackboard newspapers, theme class meetings, etc. to enable teachers and students to master safety prevention knowledge and consciously do "fire prevention, anti-skid, Preventing crowding and stampeding, preventing electric shock, preventing theft, preventing drowning, and preventing gas poisoning" and other tasks.

The "Safety Briefing" issued by the Municipal Bureau was posted, and at the flag-raising ceremony, the safety committee members of each class were required to coordinate with the class safety officer (dormitory director) to do safety precautions and strictly prohibit students from "pranking" occurrence of behavior.

2. The safety inspection team concentrated on inspecting various parts of the campus in summer, winter, and autumn to see if there are aging power lines, various electrical facilities in the school, fire safety and evacuation passages, and evacuation Whether the signage is clear, whether the lighting in the stairwell is complete and effective, etc. More than 10 winter, summer, autumn and autumn plans were formulated, and 2 summer plans were selected for drills, which further improved the safety awareness and emergency, self-rescue and self-protection capabilities of teachers and students.

Third, the administrative penalty procedures and traffic safety measures have been strengthened. Our school has recently drawn a zebra crossing at the school gate and set up obvious warning signs to remind drivers and students to enhance safety awareness, abide by traffic rules, understand and master traffic safety common sense, and take strict precautions against various winter, summer and autumn hazards.

Every time when school is out in winter, summer and autumn, the Political and Education Office and the Safety Office always pay attention to traffic safety in summer and autumn.

Fourth, the use of special equipment was inspected, and the training and management of boilers were strengthened. The boilers used in the school complied with national regulations, and the operators were certified and operated under strict regulations.

5. Strengthened the management of dangerous chemicals in the laboratory

The rules and regulations have been improved, and the management of dangerous chemicals has been strengthened. There are strict procurement, storage, account establishment, storage, There are systems for borrowing and returning items, and flammable, explosive, radioactive, and highly toxic items are strictly stored and managed in accordance with the requirements of the fire protection, health and other departments to prevent accidents and never allow sexual activities in winter, summer, and autumn.

6. Further improve school security on duty

For campus safety, the school gate is the first level and is very critical. We conscientiously implement the guard patrol system and insist on 24-hour patrols. Special emphasis is placed on key areas such as the computer room, financial room, laboratories, and student dormitories. Leading cadres lead the class and strictly enforce the job responsibility system. The personnel on duty can stick to their posts, perform their duties, and deal with problems in a timely manner. There is a teacher every day. On duty and security guard night shift, constantly patrolling every corner of the campus. How to write a self-inspection report on potential safety hazards 3

In order to better implement the spirit of the Municipal Education Bureau's "Notice on Conscientiously Eliminating Safety Hazards and Effectively Doing a Good Job in Kindergarten Safety Work", various systems have been further standardized and improved , a safety work log has been established. At present, the kindergarten is safe and stable, and the teaching order is in order. The kindergarten safety inspection situation is as follows:

In accordance with the spirit of the document and the principal’s instructions, we will further implement rectifications, improve the system, and clarify responsibilities. We first carried out publicity and education, using broadcasts, bulletin boards, class blackboards, theme class meetings, etc., to enable teachers and students to master safety prevention knowledge and consciously do "fire prevention, anti-skid, anti-crowding and anti-trampling, anti-electric shock, anti-theft, and anti-drowning" , Preventing Gas Poisoning" and other work.

1. The safety inspection team conducted a thorough inspection of the places where students gather throughout the campus to see if there are aging power lines, various electrical facilities in the kindergarten, fire safety and evacuation passages, and evacuation Whether the signage is clear, whether the lighting in the stairwell is complete and effective, etc. More than 10 safety emergency plans and activity plans were formulated, and 2 of them were selected for drills, which further improved the safety awareness and emergency, self-rescue, and self-protection capabilities of teachers and students.

Second, traffic safety measures have been strengthened. Our school recently drew a zebra crossing at the school gate and set up obvious warning signs to remind drivers and students to enhance safety awareness, abide by traffic rules, understand and master traffic safety knowledge, and strictly prevent various traffic accidents.

3. The use of special equipment was inspected, and the training and management of boilers were strengthened. The boilers used in kindergartens comply with national regulations, and operators are certified to work and operate in strict accordance with the regulations.

Fourth, the management of hazardous chemicals in laboratories has been strengthened.

The rules and regulations have been improved, and the management of dangerous drugs has been strengthened. There are strict systems for purchasing, warehousing, accounting, safekeeping, borrowing, and returning, etc., and strictly control flammable, explosive, radioactive, and highly toxic drugs. Items are strictly stored and managed in accordance with the requirements of the public security, fire protection, health and other departments to prevent accidents, and students are never allowed to participate in dangerous activities.

5. Further improve the kindergarten safety and security duty

For campus safety, the school gate is the first level and is very critical. We conscientiously implement the guard patrol system and insist on 24-hour patrols. The staff on duty can stick to their posts, perform their duties conscientiously, and deal with problems in a timely manner. There is a teacher on duty and a security guard on night shift every day, and they constantly inspect every corner of the campus.

6. Comprehensive inspection without leaving any blind spots. The kindergarten safety inspection team conducted two inspections of potential safety hazards before this to prevent various accidents from occurring.

How to write a self-inspection report on potential safety hazards Part 4

Recently, school safety accidents have occurred frequently, which has attracted the attention of departments at all levels. They need to strengthen student safety education and ensure that the political level of teachers and students is further improved. On April 19, the school district held an on-site safety work meeting at Yunhe Primary School to make arrangements for the recent safety work in the school district. It also requested that several recent safety accidents be used as lessons to increase the publicity of safety work, actively take effective measures, and resolutely Prevent similar accidents from happening.

After the meeting, our school held a team meeting. In accordance with the requirements of the school district and the actual situation of the school, we conducted an in-depth analysis of the current status and existing problems of school safety work, formulated measures, plugged loopholes, strengthened responsibilities, and actively rectified .

1. Raise awareness and strengthen awareness

Enhance the sense of crisis and urgency in safety work, urgently convene a class teacher meeting, promptly convey the spirit of relevant superior documents, and require a firm establishment of the belief that responsibility is more important than Mount Tai. We should not be sloppy or paralyzed in safety work. Each class must actively carry out various forms of publicity and education so that safety awareness is deeply imprinted in everyone's mind.

2. Actively take effective measures to formulate and further refine relevant systems and implement them.

1. "Regulations of Sangyuan No. 1 Junior High School on Strengthening School Traffic Safety Management", firstly, strengthen the publicity of traffic law provisions and conscientiously abide by traffic rules; secondly, strictly enforce school arrival times and cancel late releases. Afterwards, the students will be cleaned to ensure that students leave the school as soon as possible to prevent students from gathering at the door due to waiting for others; third, the leaders on duty, security personnel and guards will be responsible for the guidance around the door.

2. The "Regulations of Sangyuan No. 1 Junior High School on Prohibiting Students from Eating Snacks in School" firstly explains the dangers of eating snacks; secondly, the Moral Education Department and the head teacher will manage this phenomenon.

3. "Regulations of Sangyuan No. 1 Junior High School on Severe Punishment of Discipline-Disobeying Students".

3. Strengthen the investigation of potential safety hazards, ensure the safety of facilities, and provide a safe and harmonious learning and working environment for teachers and students.

On April 22, the principal personally took the lead and organized the Moral Education Office, General Affairs Office and relevant technical personnel to inspect the electrical lines, electrical facilities, fire-fighting equipment in the teaching building, as well as the fitness equipment, sports equipment, The large characters on the roof, stair handrails, walls, etc. were comprehensively and carefully inspected. During the inspection process, we must check the facts clearly, vertically and horizontally, never miss a blind corner, and promptly rectify the identified problems. After this investigation, 6 switches, 3 sockets, and 1 gate were replaced, and there are no other problems.

In view of the recent safety incidents in the school and the problems discovered through inspections, it has sounded the alarm for our future safety work, indicating that our safety work is not monolithic, and there are still safety hazards around us. We must learn lessons, strengthen prevention, increase investigation efforts, strengthen safety awareness, take precautions, prevent problems before they occur, and actively build a safe and harmonious campus. How to write a self-inspection report on potential safety hazards 5

The company received the "Notice on Carrying out the "Hidden Hazard Investigation and Management Month" Activities of China National Building Materials Group in 20xx" and further deepened the national "Safety Production Month" activities. Carry out in-depth investigation and management of potential accident hazards, combined with the actual work of the company, require all employees to study carefully and deeply understand the spirit of the "Notice", further strengthen the company's safety production work, comprehensively improve the company's safety production management level, increase safety production inspections, and effectively Prevent and resolutely curb the occurrence of safety production accidents, and consolidate and promote the current overall good safety production situation of the company.

The company fully recognizes the importance of safety and stability work, conducts publicity and mobilization work realistically, and carries out work in a down-to-earth manner. It clarifies the responsibilities and tasks of the company's safety and stability work, investigates the company's potential safety hazards in an all-round and multi-angle manner, and adopts a series of measures. Practical measures are taken to ensure that the company's safety work is implemented, and the company's safety production instructions are actively invested in the spirit of the company's safety production instructions according to the spirit of the document. The company's safety hazard investigation work is summarized as follows:

1. Attach great importance to strengthening organizational leadership

After receiving the document, the company promptly conveyed the spirit of the meeting on the investigation of potential safety hazards, and arranged and deployed special actions to investigate and control potential safety hazards. Cadres at all levels and heads of departments are required to regard this operation as a major task and set up a leading group in a timely manner to assign responsibilities to each person.

Team leader: Long Jialin

Deputy team leader: Zhou Jiming

Members: heads of various departments

2. Investigation of potential safety hazards And the goal requirements of rectification

1. Have a high degree of awareness, strengthen leadership, and act quickly. The company has always given top priority to the investigation and rectification of potential safety hazards, and carefully studied and implemented the investigation and rectification of hidden dangers.

2. Clarify tasks and implement responsibilities. The person in charge of each department of the company has designated the first person responsible for safety work and has overall responsibility for safety work. Establish and improve an operable safety work responsibility system, detail and clarify the responsibilities of relevant personnel of each safety hazard investigation team, and ensure company safety.

3. Conduct careful investigation and resolutely make rectifications. For every part and every type of hidden danger, a blanket dragnet inspection is carried out, leaving no dead ends. On the basis of this serious self-examination, the existing safety hazards must be carefully sorted out, classified, and corrective measures proposed one by one. Provide guarantee for creating a safe, civilized and harmonious company atmosphere.

4. Adhere to strict discipline to ensure effectiveness. The company attaches great importance to the investigation and rectification of potential safety hazards and requires leaders to truly implement the spirit of the document and achieve practical results without going through the motions.

3. Highlight the key points and pay attention to actual results

In accordance with the principles of "unified leadership of the company, guidance and supervision of departments" and "whoever is in charge, who is responsible", the main leaders of all levels and departments personally intervene , the leaders in charge are responsible for the implementation, and each department acts quickly, performs its duties, cooperates with each other, and fully carries out special actions to investigate and control hidden dangers. In the special action of investigation and management, all levels and departments, with a high degree of responsibility, focused on dormitories, joint workshops, keel factories, and office buildings, and focused on the management of major hidden dangers, striving to improve the management effect. Except for those that were rectified on the spot, all identified hidden dangers were listed and supervised one by one to ensure that people were identified, responsibilities were determined, and rectification measures were implemented on time. Leaders of departments at all levels personally led relevant department personnel to go to the front line to carry out investigation work. The work of the special action to investigate and control hidden dangers has been progressing smoothly. Through these solid and effective practices, the occurrence of production safety accidents has been effectively curbed, laying a solid foundation for the company's sound and rapid economic development.

IV. Careful investigation and strict implementation

Under the unified leadership of the company, departments at all levels work together, cooperate with each other, and work together to manage and manage major hazards. and special actions to investigate and control hidden dangers in the field. The first is to strictly inspect the joint workshops and severely punish illegal conduct such as commanding, taking risks and violating labor disciplines. The second is to strictly check whether special operators and special equipment are complete, and resolutely prevent unlicensed operations and expired equipment without review. The third is to strengthen fire safety and inspection work during the flood season. After these strict implementations, safety production is carried out effectively and orderly on the normal track. However, safety work is a long-term task that requires the unremitting efforts of all employees to achieve safe production in the enterprise and further implement the work of identifying safety hazards.

V. Hidden Hazard Management Situation

1. 2 company leaders and 8 cadres participated in the inspection, and they conducted inspections of major hazard sources and office buildings, dormitories, canteens, joint workshops, The keel factory conducted a special hazard investigation and management, and 18 safety hazards were detected and 14 safety hazards were rectified (4 of which the company was unable to solve). Please see the (attachment) for the implementation status of the investigation and rectification of safety hazards.

2. Effectively carry out investigation and rectification of hidden production safety hazards, strengthen the implementation of the production safety responsibility system, and ensure a stable production safety situation. We promptly found out that the raw materials in the workshop were stacked in disorder and fire-fighting equipment was not in place. We once again conducted safety production knowledge training and safety awareness education for employees. Summer has arrived and the weather is hot. We must do a good job in preventing infectious diseases and accidents, and strictly guard against fires and food poisoning. Accidents happen.

3. Effectively carry out "three-level safety education" to nip potential safety hazards in the bud. Provide "three-level safety education" to new employees entering the factory in a timely and effective manner. The company's safety inspection team organizes a safety inspection every week, and the team organizes a safety study every week and keeps records carefully. We also use various forms such as publicity slogans and organizing on-site analysis by employees to actively publicize, promptly eliminate safety hazards in the production area, and strive to implement safety work.

6. Existing problems

First, in some production situations, the main responsibilities are not implemented, there are systems that are not implemented, and there are prohibitions. They ignore the work requirements put forward by the regulatory authorities and go their own way. , focusing on production, neglecting safety, focusing on efficiency, and neglecting management; secondly, individual departments and employees do not pay enough attention to the special actions to investigate and control hidden dangers, and they often replace special actions with daily work, and the investigation and management of hidden dangers are tightened for a while and relaxed for a while. Third, some employees lack corresponding safety production skills and have weak safety awareness, and accidents occur from time to time. Fourth, some employees still have the phenomenon of "three violations" and insufficient labor insurance, which shows that the supervision of department heads is not in place and safety work has not been further implemented, and needs to continue to be strengthened.

7. Next steps

1. Implement rectifications one by one for existing problems to prevent similar situations from happening, and continue to carry out in-depth investigation and management of hidden dangers. In the future, we must further strengthen leadership, promptly summarize and analyze the problems existing in the investigation and management of hidden dangers at each stage, carefully identify existing problems, clarify tasks, implement responsibilities, effectively increase the intensity of investigation and management, and comprehensively promote the orderly development of all work on safety production. .

2. Further strengthen supervision and management, carefully inspect and supervise the implementation of safety supervision responsibilities at all levels, improve the system, refine measures, and comprehensively implement the organizational leadership and supervision management of the investigation and management of safety production hazards. Efforts should be made to build a regular, institutionalized and standardized long-term mechanism for the investigation and management of hidden dangers in production safety, and we must effectively increase the efforts to rectify hidden dangers in production enterprises.

3. Highlight the key points and effectively carry out safety inspections of various departments and employees. Focused monitoring and inspection must be implemented on joint workshops, keel factories, dormitories, canteens and other areas with prominent safety hazards and prone and frequent accidents.

Although the company has done a lot of work in this safety hazard investigation, there is still a certain gap between the requirements of superior leaders. The company will carefully summarize the good practices in the safety hazard investigation and find weak links. , in accordance with the company's system and next work measures, pay close attention to implementation, strive for greater results in hidden danger investigation actions, and promote the stable improvement of the company's safety production situation.

4. Safety hazard investigation report

Based on the actual situation of production safety in XX City, the Municipal Safety Committee Office will take the lead and organize the Municipal Work Safety Bureau, Housing and Urban-Rural Development Bureau, Fire Brigade, XX Town The government and other departments formed a special inspection team to conduct special inspection and rectification of production safety in employee dormitories at construction sites across the city from March 16 to 23, 20xx.

The inspection situation is now reported as follows:

1. Work situation

In this special inspection of production safety in employee dormitories at construction sites across the city, we focused on the safety of employee dormitories at construction sites across the city. Special inspections were conducted on fire protection, safe use of electricity, etc. During this inspection and rectification, *** inspected six construction site employee dormitories including the XX Project Department of XX Branch of XX City of XX Construction and Installation Engineering Company, and *** issued an inspection 5 submissions.

2. Potential safety hazards discovered during the inspection

From the special inspection, it was found that most of the employee dormitories at construction sites in our city have the following problems:

1. Employees' fire safety awareness is weak

Construction units employ temporary migrant workers with high mobility and have not undergone strict management and fire safety knowledge training. They have weak fire safety awareness and do not understand or master basic fire protection knowledge. Fire extinguishers are used to put out initial fires, but they do not call the police or organize personnel evacuation. Especially for migrant workers whose construction time is short and their work is scattered, it is difficult to implement fire safety management.

2. The management does not have adequate fire safety management

The electricity consumption is large, the laying of electrical lines is not standardized, the illegal installation of electrical equipment, and the unauthorized connection of electrical lines are more serious. Some also install power distribution devices directly on combustible components. The construction unit ignores the management of cigarette butt ignition sources, such as migrant workers' dormitories and building material storage yards. There are many combustible and combustible materials, and the temporary migrant workers and outsiders hired smoke at will. Once cigarette butts are discarded in places with fire hazards, the risk will increase over time. long and can easily cause fire.

3. Measures and Suggestions

In response to the safety hazards discovered during the inspection, the inspection team put forward rectification suggestions on the spot and required construction sites with safety hazards to make rectifications immediately. In order to do a good job in safe production at construction sites in our city, the following suggestions are hereby put forward:

1. Strengthen the safety of construction sites, indoor and outdoor decoration project construction sites, workers’ dormitories, warehouses, woodworking processing plants, Fire safety management of key fire prevention areas such as canteens, power distribution rooms and open fire operations. Reasonably configure a sufficient number of fire-fighting equipment to ensure complete and effective fire-fighting facilities, smooth fire evacuation channels, and set up eye-catching fire signs. Establish an inspection and inspection system for enterprise leaders and personnel on duty. Clarify emergency response methods, implement fire safety and security work to specific positions and specific personnel. Personnel on duty will be on duty 24 hours a day, conscientiously carry out inspections and inspections, and be proficient in using fire extinguishing equipment and alarm facilities, so as to prevent disasters before they occur. , to ensure that fire safety work is foolproof.

2. Strengthen the management of electricity consumption at the construction site and employee dormitories. The construction unit shall determine an electrician with a special operation certificate who has been trained in production safety and fire safety to correctly and reasonably install and maintain electrical equipment. Frequently check the operation of electrical lines and electrical equipment, focusing on checking whether the line joints are in good condition and whether there are any Safety device, whether there is short circuit heating, insulation damage, etc.

3. The construction authorities should carry out extensive publicity, education and training on fire protection, production safety laws and regulations, and basic common sense in the construction industry, and publicize laws and regulations on fire protection, production safety and fire protection, The common sense of production safety has further improved the employees' awareness of production safety, fire safety awareness and fire prevention and fire-extinguishing skills, forming a situation of fire protection and production safety with group prevention and group management.

4. The Municipal Housing and Urban-Rural Development Bureau, the Public Security Fire Department and the Municipal Work Safety Bureau should strengthen supervision, inspection and guidance on the safety production and fire safety work of the projects under their supervision according to their respective division of functions. Responsible units that do not conscientiously perform their fire protection and production safety responsibilities and create hidden dangers of major fire safety accidents and major safety production accidents must be seriously investigated and punished. If necessary, measures to suspend production and rectification shall be taken, rectifications shall be made within a time limit, and the hidden dangers shall be completely eliminated.

How to write a self-inspection report on potential safety hazards Part 6

Our school firmly establishes the concept of "life first, safety first", effectively strengthens organizational leadership, clarifies responsibilities, acts quickly, and refines various prevention and response measures. , ensure campus safety. According to the spirit of the District Education and Sports Bureau’s Education Document No. 97, our school carried out a special investigation and management of safety hazards in the entire school on December 31, 20xx. The special self-examination work is summarized as follows:

1. Raise awareness and establish an organization

The school attaches great importance to safety work, carefully studies the documents, clearly implements the safety accident accountability system, and establishes it in a timely manner Work leadership group. The details are as follows:

Team leader: Hu Xia

Deputy team leaders: Xu Delin, Zheng Minzhi

Members: Zan Hongfu, Liu Wanshui, Wu Jicheng, Li Zengguang, Chen Zhiliang, Xu Liming, Chen Zhengfang, all class teachers

2. Organize efforts and carefully investigate hidden dangers

(1) Division of work among safety inspection personnel

1. School building safety, Personnel inspecting the security environment of the stair corridors and surrounding campus:

Xu Delin, Zan Hongfu, Liu Wanshui

2. Water and electricity safety inspection personnel:

Zheng Minzhi, Zan Hongfu, Wu Jicheng, Li Zengguang

3. Laboratory and computer room safety inspection personnel:

Zheng Minzhi, Zan Hongfu, Wu Jicheng, Chen Zhiliang, Xu Liming, Chen Zhengfang

4. Construction Safety inspectors of construction sites and school buses:

Hu Xia, Xu Delin, Liu Wanshui

5. Traffic safety inspectors:

Xu Delin, Zan Hongfu, and others Class teacher

(2) Inspection requirements

1. The inspectors shall conduct a comprehensive inspection of the inspection content they are responsible for.

2. Fill in the inspection records truthfully and notify various departments.

3. If any hidden dangers are discovered, notify the office in a timely manner to resolve them without leaving any hidden dangers.

4. Each class teacher immediately carried out a safety education on preventing and dealing with low-temperature rain, snow and freezing weather, focusing on anti-freeze, fire prevention, anti-trampling, and prevention of traffic accidents. Parents should be reminded to pay attention to weather changes and student safety through various means, and to perform their guardianship duties.

5. Publicity and reminders should be strengthened for social vehicles that pick up and drop off students by issuing leaflets, on-site inspections, etc. Drivers are required to take practical measures to prevent low-temperature rain, snow and freezing weather, and overloading, speeding and other violations are strictly prohibited Behavior.

3. To effectively strengthen campus security and ensure the safety of teachers and students’ property.

On December 31, 20xx, Principal Hu Xia led the relevant personnel of the safety work leadership group to conduct inspections of school water and electricity, school buildings, stair corridors, campus surroundings, construction sites, school carports, transportation, and possible hazards on campus. A comprehensive and thorough inspection was conducted to identify potential safety hazards. The overall situation is good. The rupture of the water pipe under the teaching building was repaired in time; the broadcast line was repaired in time; it was freezing and the construction site was reminded to pay attention to safety; students on the bus going to Shuangqiao direction were not excluded from joining the queue. The relevant personnel on duty have been notified to deal with the phenomenon; some students have been riding bicycles side by side, and the class teacher has been notified to provide traffic safety education; there are mobile stalls at the school gate, which must be dealt with; the stairs in the teaching building have become loose, and have been stopped. The office arranges maintenance in a timely manner;

4. Make multiple efforts to jointly manage and promote safety

Safety work is an important guarantee for the stability of the school. Safety work should be based on prevention, and the alarm bell should sound. To this end, we organized a class meeting with the theme of "Winter Safety" in the school, gave speeches on various types of safety under the national flag, and issued the "Traffic Safety Notice for Picking Up Students in Winter at Xuancheng No. 8 Middle School." On December 29, through the campus radio, all teachers and students were educated on the safety of the wind and snow weather in winter, especially in recent days.

At the gate of the campus, considering the geographical location of our school, there are many vehicles coming and going at the gate. We have strengthened our contact with the traffic police team and promptly issued the "Traffic Safety Notice for Picking Up Students in Xuancheng No. 8 Middle School in Winter" to parents who pick up students. Book" to ensure traffic safety. On December 31, five groups conducted a comprehensive self-examination of the school, found problems, and promptly notified relevant personnel to make rectifications. During the New Year's Day, a 24-hour duty system was reasonably arranged with the administration leading the class and teachers participating.

In short, in the process of implementing safety work, teachers and students of our school are clearly aware that safety work does not matter, and everyone works together to create a safe campus.