Enterprise credit self-inspection report

Enterprise credit self-inspection report (select 5 articles)

How time flies! The work is over. Looking back on the work during this period, the existing problems are worth summarizing. Therefore, we must make a summary and write a self-inspection report. Before writing, you can refer to the model essay. The following is the enterprise credit self-inspection report (5 selected articles) I collected for you, hoping to help you.

Enterprise credit self-inspection report 1 The content and format requirements of the self-inspection report on the implementation of environmental protection of enterprise construction projects are as follows:

A, the content of the self-inspection report

(a) the basic situation of the construction unit and the general situation of the project.

The basic information mainly introduces the general situation of the construction unit; The general situation of the project mainly includes: project composition, main construction contents, environmental impact assessment (when to entrust which unit to prepare the environmental impact assessment report, when to get the reply from the environmental protection department, etc.). ), when the project starts and is completed, when the trial production is approved by the Municipal Environmental Protection Bureau, the total investment of the project and environmental protection investment, etc.

(2) Brief description of project process flow (process flow chart is preferred)

(three) the implementation of the EIA approval

This paper mainly introduces the implementation of EIA by the construction unit and its reply:

1. Implementation and supervision of environmental protection measures during construction (brief introduction of industrial projects, with emphasis on ecological projects);

2. Various environmental protection facilities or measures (water, gas, noise, solid waste and hazardous waste, etc.). ) construction implementation, operation status since trial production or trial operation;

3. Whether the nature, scale and location of the construction project or the production technology adopted have changed, and if so, whether to apply for change or resubmit the EIA document;

4, the implementation of environmental impact assessment and other requirements for approval.

(four) environmental protection agencies, environmental protection facilities operating procedures, environmental protection rules and regulations, environmental emergency plans, monitoring and testing institutions. ;

(five) the existing problems, causes, rectification measures and the next environmental protection work plan.

Second, the self-inspection report format

The self-inspection report must be provided according to the following requirements:

(1) cover page

1, Title: Environmental Self-inspection Report of xx Project

2. Signature: xx construction unit (seal)

3. time: XX, xx, xx.

(two) the inside page (including the five parts of the above requirements)

(iii) Annex

1, discharge pollutants such as waste water and solid waste. , entrust others to treat, should be attached to the entrusted treatment agreement and other relevant supporting materials, which can be a copy;

2. Layout of each process workshop in the plant area

To apply for the acceptance of environmental protection after the completion of a construction project, the following conditions must be met:

1, the environmental protection examination and approval procedures in the early stage of construction are complete, and the technical data and environmental protection files are complete;

2, environmental protection facilities and other measures have been completed or implemented according to the requirements of the approved environmental impact report (table) or environmental impact registration form and design documents, environmental protection facilities have passed the load test monitoring, its pollution prevention and control ability can meet the needs of the main project;

3. The installation quality of environmental protection facilities conforms to the professional engineering acceptance specifications, procedures and inspection and evaluation standards promulgated by the state and relevant departments;

4. Have the conditions for the normal operation of environmental protection facilities, including: the operators are qualified after training, the post operation rules and corresponding rules and regulations are sound, the supply of raw materials and power is implemented, and other delivery requirements are met;

5. Pollutant discharge shall meet the requirements of the environmental impact report (table) or the standards specified in the environmental impact registration form and design documents and the approved total pollutant discharge control indicators.

2 XX food co., ltd. enterprise credit self-inspection report:

According to the notification requirements of Shaanxi (20xx) No.37 document, carry out self-inspection and self-correction activities of enterprise safety production. The leaders of our company attach great importance to it, actively organize relevant personnel to do a good job in organizing and launching, and seriously carry out self-examination and self-correction, leaving no dead ends. In view of the existing problems and weak links, according to the principle of fixed personnel, fixed time, fixed measures and fixed funds, the rectification plan is formulated, and the rectification measures are implemented to prevent accidents. The self-inspection situation is summarized as follows.

First, strengthen management and clarify responsibilities.

In order to effectively strengthen the leadership of our company's safety production work, the company has adjusted and enriched the company's safety production work leading group, striving for clear goals, implementation of responsibilities, and work in place to prevent problems before they happen.

Second, detailed measures, put in place

Fully implement the policy of "safety first, prevention first" and the spirit of relevant documents of municipal safety production, adhere to management according to law, strengthen supervision, strictly check, urge rectification, eliminate hidden dangers and control accidents. Focus on supervision, prevent general safety accidents, put an end to serious safety accidents, and ensure the safety of employees' lives and property.

Third, whether the work content and measures are appropriate.

1. Strengthen the publicity and education of safety knowledge, and strive to improve the safety awareness of all employees in the company. Conscientiously carry out publicity and education on safety production laws, regulations and policies, advocate and do a good job in safety culture construction, and enhance employees' awareness of safety production. In accordance with the relevant requirements, our enterprise actively sends personnel to participate in the safety training and retraining organized by the higher authorities, earnestly pays special attention to the training of employees' knowledge and skills of safety in production, and strives to ensure that the certificate-holding rate of special operations personnel and employees reaches 100%.

2. Strengthen safety responsibility management and establish and improve various rules and regulations. The first person responsible for the safety work of this unit is the person directly responsible for the safety production work of this unit, and must earnestly perform their duties, strengthen supervision and inspection, eliminate all kinds of safety hazards in time, and prevent all kinds of safety accidents. First, earnestly implement the responsibility book for target management of safety production signed with the company, so as to have posts, positions and responsibilities. Second, the company's production safety leading group regularly organizes personnel to inspect and supervise the implementation of various departments and register the situation as the scoring basis for the year-end comprehensive assessment. Third, all units should formulate and improve various safety production rules and regulations according to their own reality, and strictly implement them, put an end to the phenomenon of "three violations", and earnestly ensure that safety production has rules to follow.

3. Highlight key points, pay close attention to implementation, and intensify the investigation and rectification of hidden dangers.

A. conducted a comprehensive safety inspection. The enterprise safety production leading group organizes a comprehensive safety production inspection every quarter, urges the workshop to formulate rectification measures for major hidden dangers, arranges special personnel to supervise the rectification, and files the rectification of hidden dangers; Each workshop and safety responsible unit shall organize a safety inspection once a month, find hidden dangers, formulate measures, designate special personnel, make rectification within a time limit, and report the situation to the enterprise safety production leading group in time.

B. investigation of potential safety hazards in the workshop. Standardized the workshop electricity consumption, established the use file of temporary overlapping wires, and organized the electric power maintenance department to inspect the power lines in the workshop to ensure the safety of workshop electricity consumption. Second, focus on the inspection of production equipment, and the workshop director will take the lead in rectifying the hidden dangers, and record them, and make corresponding adjustments to the classification planning of workshop items, requiring classified and standardized storage of related materials, products and mechanical spare parts. Improve the safety signs such as fire signs, precautions and indicating signs in the workshop.

Four. Existing problems and deficiencies

1. Enterprise employees (workshops) have weak awareness of safety production, and publicity and education on safety laws and regulations need to be strengthened.

2. Insufficient investment in safety production.

Although some achievements have been made in safety production, there is still a certain gap from the requirements of higher management departments. We will carry forward our achievements, find out the gaps and make up for the shortcomings in our future work. We will firmly establish that safety is the guarantee and safety is the benefit. Grasping safety means grasping development, and grasping safety means taking care of the overall situation. Further enhance the sense of responsibility and urgency, establish the guiding ideology of "production must be safe, and safety is for production", earnestly perform their duties, sound the alarm bell, and make unremitting efforts to ensure the company's safe production and economic development.

Enterprise credit self-inspection report 3 I. Overview of pharmacies

Our store was established in xx month of 20xx, located in XXXX, with a business area of XX square meters. The pharmacy currently has XX employees, including XX pharmacists, XX pharmacists and XX pharmacy graduates. Operating Chinese patent medicines, chemical preparations, antibiotics, biochemical drugs and other ***XX varieties, with annual sales of XX million yuan and fixed assets of XX million yuan. The pharmacy has established a relatively perfect quality management system, which has been well implemented, and no counterfeit or inferior drugs or other illegal acts have ever occurred.

Second, the self-examination situation

(1) Management responsibilities:

In one year's operation, our store has always adhered to the principle of quality first, operated in strict accordance with drug laws and regulations, and engaged in drug business activities in accordance with the business mode and business scope approved according to law, which fundamentally put an end to all kinds of illegal events. At present, our quality posts are sound, our responsibilities are clear and our functions are well played. GSP quality management system is the code of conduct for drug management in pharmacies. Therefore, according to the requirements of GSP and its detailed rules for implementation, our store has formulated XX management systems such as quality policy and objectives, drug procurement management, first enterprise and first variety quality audit management, drug maintenance management, drug acceptance management, drug display management, drug sales management, prescription deployment management, unqualified drug management and personnel training, hygiene and personnel health management. Learning and system implementation are included in the comprehensive assessment, and the system implementation is checked once every quarter, and the inspection is recorded. Formulate improvement measures for the problems existing in the inspection, and order relevant posts to make rectification within a time limit to ensure the implementation of the system.

(2) Personnel and training

XXX, the person in charge of quality, and XXX, the prescription auditor, are in compliance with GSP regulations. XXXXXXX, the person in charge of the enterprise, has participated in XX trainings in the city. For those who have direct contact with drugs, a health examination is conducted once a year, and health records are established. No patients with diseases that may contaminate drugs were found.

In order to improve employees' understanding of GSP implementation and improve the quality of all employees, we have carried out multi-content and multi-form learning and training in professional ethics, laws and regulations and professional knowledge. And establish employee training files, train new employees in pre-job professional skills and regulations, and take up their posts after passing the examination. Through a series of education and training, employees' quality awareness, professional quality, legal concept and legal concept have made great progress and improvement, laying a solid foundation for our store to implement GSP.

(3) Facilities and equipment

After renovation and construction, the business premises and ancillary facilities of our store XX have reached the requirements of GSP. Spacious, bright and clean, equipped with fire-fighting and anti-theft equipment that meets the requirements, and establish regular inspection, maintenance and use files. It ensures the quality of drug management and meets the requirements of GSP.

(4) Procurement and acceptance

In order to prevent counterfeit and inferior drugs from entering our store, our store has focused on strengthening the qualification examination of suppliers' sales staff, the legality examination of purchased drugs, contract management and rectification reports. The first is to select and review suppliers, and clearly stipulate that goods must be purchased from regular production enterprises and operating enterprises with legal qualifications and complete "licenses". Secondly, carefully review the legitimacy and quality reliability of drugs, and strictly follow the requirements and regulations of GSP to review purchased drugs and imported drugs. Focus on reviewing the first camp varieties. Signing a procurement contract in strict accordance with the requirements, with clear quality terms and a product certificate attached to the drug; Drug packaging meets relevant regulations and cargo transportation requirements; All the drugs purchased have legal bills, and the records of drug purchase are established according to the regulations, so that the tickets, accounts and goods are consistent.

In the process of drug quality acceptance, inspectors inspected the purchased drugs batch by batch according to the legal standards and the quality clauses agreed in the contract, and inspected the packaging, labels, instructions, product certificate and appearance quality of drugs one by one according to the sampling principle stipulated in the Quality Management System for Drug Acceptance. The imported drugs carefully checked the copies of the Registration Certificate of Imported Drugs and the Inspection Report of Imported Drugs, as well as the Chinese instructions stamped with the original seal of the supplier's quality management agency, and accepted the first camp. The drug quality acceptance record shall be established according to GSP regulations, and the record shall be complete, detailed and standardized.

(5) Display and storage

The quality and packaging of drugs displayed in the store meet the requirements, and they are displayed according to their uses. The thought report model shows that prescription drugs and over-the-counter drugs, internal drugs and external drugs, drugs and non-drugs are displayed and stored separately as required. The removed drugs are stored at the removal counter, and the original packaging and labels are retained. Disassembly records are detailed. Check and maintain the drugs on display regularly every month, record the quality inspection in detail, and establish instruments and equipment for drug maintenance.

(6) Sales and service

In the sales work, pharmacies engage in pharmaceutical business activities in strict accordance with the legal mode and scope of operation, and hang pharmaceutical business licenses, business licenses and professional certification materials as required. In the process of drug sales, the performance, use, contraindications, taking methods and other precautions of drugs are correctly introduced to customers in strict accordance with the instructions. Tools for unpacking drugs and packaging bags are clean and hygienic. Pharmacists are responsible for consulting over-the-counter drug use services, wearing uniform clothes and badges during working hours. There are service conventions, supervision telephones and customer complaints in the business room, and the opinions reflected by customers are handled and recorded in time according to procedures. For the convenience of customers, a 24-hour service system is implemented. According to the quality management system, check and record the implementation of the quality management system every quarter, formulate improvement measures for existing problems and rectify them in time. There has never been a drug quality accident in the sales and service of pharmacies.

Our shop operates according to law, strictly controls the quality and wins the trust of customers with excellent service attitude.

Third, the main problems and corrective measures

In order to better implement GSP, our store conducted a comprehensive self-examination through reporting, field visits, consulting materials, investigation and inquiry. Through self-examination, we believe that the requirements of good manufacturing practice and its detailed rules for implementation have basically been met, but there are still some gaps in some aspects:

In view of the above problems, our store has carried out serious analysis and research, and formulated measures to require all post personnel to strengthen their awareness of business learning, strive to master various business knowledge in a short time, and strive to improve service quality. At the same time, we will take this GSP certification as an opportunity to further enhance the awareness of quality management, intensify quality management, constantly strengthen and improve the hardware construction and software management of stores, and strive to gradually modernize, standardize and institutionalize quality management to ensure the drug safety of the general public.

Enterprise credit self-inspection report 4 According to the requirements of the Notice of xx Construction Enterprise Management Station on Carrying out Special Inspection of Construction Market Behavior in xxx Years, our company attached great importance to it and made research and deployment on carrying out special inspection of market behavior in time.

In terms of safety in production:

1. Our company strictly implements the guidelines, policies, decrees and safety technical regulations of the party and the state on production safety, establishes the responsibility system for construction site safety, improves the safety organization, and is responsible for the management of safety work while managing production. All kinds of technicians and workers are responsible for the safety production of their production posts.

2, the construction site safety management regulations, equipped with full-time security officer, and in each team equipped with part-time security officer, all projects must have a construction organization design and targeted safety technical measures before start working, the construction site should have a written technical disclosure system.

3, the construction site management personnel must wear certificates or cards to prove their identity, and regularly check the safety system and safety inspection records. Hidden dangers of accidents must be implemented to people, time and measures, and the notice of rectification of hidden dangers of accidents should be filled in. It is necessary to establish a safety education system, conduct three-level safety education for new workers, have safety education content, and conduct annual training and assessment for full-time safety officers. Establish and record the system of pre-shift safety activities, with safety signs and layout on the construction site.

4. When construction personnel enter the site, they must provide "three treasures" personal labor protection articles. Each employee must carry out civilized construction, keep the site clean and tidy, keep the materials neatly stacked, set safety signs on the site, roads, drainage ditches and dangerous places, and have fire control measures, systems and fire-fighting equipment in the dormitory on site. Establish a guard system and have safety slogans on site. For living facilities: canteen staff should have employment certificate, health certificate and so on. Ensure the drinking water hygiene of the supplier.

5, all kinds of mechanical operators should be trained in accordance with the provisions, after passing the examination and certification rear can operate. It is forbidden to work without a license, and the electrical equipment on the construction site must be organized according to the electrical regulations. Protective measures must be taken to use electricity on site, three-phase five-wire system must be adopted, and the regulation of "one machine, one brake, one leakage and one box" must be implemented. Non-electricians are not allowed to pull and connect randomly. Installation, maintenance and dismantling of temporary electricity projects must be completed by electricians, who must hold relevant certificates.

At the same time, in the management of migrant workers' use, our company pays migrant workers' wages in strict accordance with the Labor Law, the Interim Provisions on Payment of Wages by Employers and Employees and the Minimum Wage Regulations, and pays them on time every month, and never defaults or deducts them. Strengthen target management and actively implement the responsibilities of migrant workers. Establish a work ledger and actively standardize the working procedures of migrant workers. Our company will continue to operate strictly according to the rules, carry out safe and civilized construction, and strive to build quality projects and brand projects.

Enterprise credit self-inspection report 5 1. Conscientiously implement the spirit of political work in the General Factory and deploy annual counter-measures.

At the beginning of the year, according to the actual situation after reorganization, combined with the main points of discipline inspection and supervision work of the General Factory, the opinions on discipline inspection and supervision work of xx Factory in 20xx were studied and formulated, and the discipline inspection and supervision work for the whole year was planned:

First, take various forms to solidly carry out the education of party style and clean government;

Second, the party's discipline should be serious, and leading cadres should be honest and self-disciplined;

Third, strengthen supervision and improve the level of diligence;

The fourth is to intensify the work of letters and visits and resolutely investigate and deal with cases of violation of law and discipline;

Fifth, strengthen system construction and promote the gradual deepening of source governance;

Sixth, strengthen the responsibility assessment and conscientiously implement the responsibility system for building a clean and honest government;

Seventh, do a good job in business training and strengthen team building.

On this basis, in view of the new situation that cadres and workers are active in thinking and prone to problems during the rectification period, in order to strengthen the sense of responsibility of cadres at all levels, the Party Committee of the branch instructed the Disciplinary Committee of the branch to refine the responsibility objectives for the construction of the party's work style and clean government according to the requirements of implementing the responsibility system for the construction of the party's work style and clean government, and decompose them into departments and responsible persons. At the same time, the target responsibility book for building a clean and honest government in Nanyang Branch of xx Factory was printed. The target responsibility book signed by the party and government leaders of the branch and the team members of the branch was 14, and the target responsibility book signed by the team members and the departments in charge was 12. In April, a factory-wide political work conference was held, attended by more than 200 department heads, branch secretaries, discipline inspection and supervision information officers and cadres and workers in key business departments. At the meeting, not only the annual political work was deployed, but also the annual discipline inspection and supervision work was comprehensively arranged, and a letter of responsibility for building a clean and honest party style was signed among team members and between team members and heads of departments in charge.

Two, take various forms to strengthen the education of party style and clean government.

Mainly carried out the following work: First, strengthen pre-holiday education. During the holiday season, all kinds of unhealthy tendencies are prone to occur, so strengthening the supervision of leading cadres and the treatment of holiday diseases is the focus of anti-corruption work during the holiday season. To this end, on the eve of the two festivals, the Disciplinary Committee of the Branch issued a special document, promptly forwarded the notice of the Disciplinary Committee of the CPC Central Committee on strictly observing the rules of honesty and self-discipline and resolutely prohibiting extravagance and waste during the New Year's Day and the Spring Festival in 2005, and put forward six specific requirements in combination with the actual situation of the enterprise: First, all departments should organize their own cadres and workers, seriously study the spirit of the notice, and convey the rules and requirements of their superiors to every cadre and worker. Educate and guide leading cadres in party member to firmly establish a sense of honesty, enhance their sense of discipline and legal system, always maintain a modest and prudent style, and maintain a good atmosphere of hard work, thrift and honesty; The second is to emphasize that cadres at all levels should strictly implement the relevant provisions and disciplines of honesty and self-discipline. Reiterate that leading cadres are not allowed to accept cash, marketable securities and payment vouchers from relevant units and individuals; Third, party member cadres are forbidden to participate in gambling in any form, and the heads of various departments are required to strengthen the education and management of cadres and workers in their own departments. If the gambling problem of party member cadres within the direct jurisdiction is not stopped, the main person in charge of the department and other relevant responsible persons shall be held accountable. Fourth, we must seriously change our work style and earnestly care about people's lives. Leading cadres should go deep into the grassroots and strengthen close ties with the masses. Fifth, advocate a new fashion of civilization and health. We must resolutely resist and oppose all kinds of feudal superstition and illegal activities; Sixth, all departments should organize cadres to do a good job in post-holiday self-inspection, and write a written self-inspection report in combination with studying and implementing the provisions of the Notice. As soon as I went to work after the holiday, all 24 departments reported responsible self-inspection reports.

Second, vigorously carry out the study, publicity and implementation activities of "Outline of Establishing and Improving the Punishment and Prevention System with Equal Attention to Education, System and Supervision" and "General Factory System Compilation". The implementation outline is a guiding document to carry out the work of building a clean and honest party style at present and in the future. In order to enable party member cadres in the whole plant to fully grasp the basic spirit and main contents of the Outline, incorporate the establishment and improvement of the punishment and prevention system into the overall planning of enterprise development, and lay a solid ideological foundation for the implementation of the Outline, the Disciplinary Committee of the Branch Company took the study, publicity and education of the Outline as the focus of its work in the first half of the year. On the one hand, we purchased 100 copies of the "Implementation Outline" and distributed it to middle-level and above cadres together with the "System Compilation" of the General Factory, so that cadres at all levels in the whole factory can be familiar with the contents of the outline and keep it in mind. On the other hand, I bought the CD-ROM of the "Implementation Outline" recorded by the propaganda classroom of the CPC Central Commission for Discipline Inspection, and concentrated on screening and observing. At the same time, in order to test the learning effect of cadres, in mid-June, the branch discipline inspection commission organized all middle-level and above cadres to carry out the knowledge test of learning the Implementation Outline and the System Compilation, which well mobilized the learning consciousness of cadres at all levels and received good results. The excellent rate of examination is over 95%, which really achieves the purpose of promoting learning through examination.

Three, serious party discipline, promote the work of leading cadres' honesty and self-discipline.

The honesty and self-discipline of leading cadres is the key to carry out the construction of party style and clean government and the anti-corruption work in depth. This year, we have focused on the following aspects: First, in view of the fact that the reorganization has entered the substantive operation stage, we reiterated that leading cadres at all levels in the factory must conscientiously abide by the "Several Provisions on the Integrity of Leaders in State-owned Enterprises (Trial)", strictly abide by the eight requirements of the four disciplines, and strictly abide by the 12 requirements of the provincial party Committee on the integrity of leading cadres at all levels. At the same time, it is particularly emphasized that we should strictly abide by the five disciplinary requirements put forward by the Disciplinary Committee of the General Factory during the rectification period, and clearly put forward that the whole factory must maintain a high degree of consistency with the Party Committee and the Factory Department of the General Factory in terms of ideology, politics and actions, and conscientiously implement a series of principles, policies and resolutions, as well as the decisions and work arrangements of the Party Committee and the Factory Department of the General Factory on the production, operation, management, reform, stability and development of enterprises, so as to ensure the smooth implementation of government decrees. At the same time, we also require leading cadres at all levels to carefully check and correct themselves in time according to the requirements of the General Factory. In particular, it is necessary to strengthen the management of spouses, children and staff around them. We should regard the process of inspection and control as a process of party spirit exercise, start with the details, prevent delays, constantly sound the alarm, and establish the image of hard work, honesty and diligence for the people among the broad masses of cadres and workers.

Second, continue to implement the regulations that leading cadres are not allowed to accept cash, marketable securities and payment vouchers from relevant units and individuals. This work is tied up with the treatment of holiday diseases, starting from three aspects: pre-holiday education, mid-holiday supervision and post-holiday inspection, and focusing on strengthening post-holiday supervision and inspection. Especially after the Spring Festival, a traditional festival, the factory discipline inspection and supervision office issued a notice asking all departments to report the self-inspection report on implementing the spirit of superiors and implementing relevant regulations during the festival. Judging from the briefing, all departments can strengthen ideological education, conscientiously implement the spirit of the party group of the provincial company, and all cadres and departments can strictly abide by the six requirements put forward by the factory discipline inspection commission. The two departments registered the condolences given by the institutions and found no misappropriation.

Four, broaden the channels of supervision, and effectively establish a discipline inspection and supervision information network.

It is an effective channel to give full play to the supervisory role of employees to establish a discipline inspection and supervision information network with employees' participation. This system has been adhered to in Nanyang Branch for many years, and this year it will continue to carry out this beneficial practice. At the political work conference at the beginning of the year, the Party Committee of the Branch made a comprehensive deployment of discipline inspection and supervision information as an important content. The meeting summarized last year's activities, arranged this year's work, and made clear the focus of work. At the same time, three groups of advanced information officers and 2 1 excellent information officers emerged last year were commended. This year, the General Assembly appointed 56 new information officers and re-established the discipline inspection and supervision information network. After the meeting, we also carried out the first annual information collection activity, and 32 information officers provided 52 pieces of various information, which were summarized as 10. This information provides first-hand information for discipline inspection and supervision, and also provides a basis for factory leaders to gain insight into employees' ideological conditions and make correct decisions.

Five, strengthen the sense of responsibility, and earnestly do a good job in the responsibility system for half a year.

Seriously organizing, coordinating, supervising and inspecting the responsibility system for building a clean and honest party style is an important task of the discipline inspection and supervision department and an effective means to strengthen the sense of responsibility of leading cadres. At the beginning of June, according to the annual work arrangement, the branch discipline inspection commission began to organize a half-year self-examination of the responsibility system for building a clean and honest government, requiring all departments to take the ongoing education activities to maintain the advanced nature of party member as an opportunity, and conduct a comprehensive self-examination of the responsibility system for building a clean and honest government according to the responsibilities stipulated in the responsibility system for building a clean and honest government and the actual work of the departments, combined with the contents stipulated in the target book for building a clean and honest government signed with the leaders in charge of the factory. Focus on self-inspection and implementation in five aspects: the work deployment of the Party Committee of the General Factory on building a clean and honest government, the performance of post responsibilities by departments and cadres, and the implementation of various provisions on honesty and self-discipline by departments and cadres. All departments are required to seriously review and summarize the work in the past six months and write a responsible self-inspection report. By the end of June, 24 departments of the whole factory had made a serious self-examination and summary in combination with the actual work. From the inspection and the materials reported by various departments, it can be seen that all functional departments and cadres can strengthen their sense of responsibility, pay close attention to the implementation of their work, conscientiously implement their tasks, and better fulfill the provisions of the responsibility system for building a clean and honest party style. At the same time, all departments can formulate specific measures for the next step according to the actual situation, which has promoted the implementation of the responsibility system for building a clean and honest government.

In the first half of the year, while doing the above work well, we also insisted on seeking truth from facts, made great efforts to strengthen the work of letters and visits, took broadening the source of cases and unblocking the channels of letters and visits as the basic links in investigating cases, and advocated and encouraged the broad masses of cadres and workers in the factory to actively report all kinds of illegal, disciplinary and illegal facts through different channels. However, due to the lack of valuable case clues in the past six months, the investigation of the case has not been filed together. In the second half of the year, we should seriously study the experience of the General Factory in handling cases, actively seek the source of cases, take the initiative to attack, strengthen the investigation and handling of cases, and strive to make a breakthrough in investigating cases.

In short, in the past six months, we have made some useful explorations and carried out some positive work in ensuring the production and operation of enterprises in combination with the actual production and operation of enterprises. However, while affirming the achievements, we also deeply feel that there are still many problems that cannot be ignored in the work of building a clean and honest party style, including: First, some departments and cadres do not have a good understanding of the work of building a clean and honest party style, their positioning is not accurate, their initiative in learning party discipline and rules is insufficient, and there are problems of both hard and soft. Second, some working mechanisms are not perfect, and the depth and breadth of work are not satisfactory; Third, the supervision and inspection efforts need to be further strengthened. In the second half of the year, under the correct leadership of the Party Committee of the General Factory, we should conscientiously sum up experience, find out shortcomings, carry out work in a down-to-earth manner around the annual work objectives, and strive to make positive contributions to promoting the construction of party style and clean government in the branch factory with more full work enthusiasm.

;