5 templates for annual work summary of petroleum technology

column selection: "Annual Work Summary of Petroleum Technology", welcome to read.

As time goes by, the work has ushered in a new year. Now we will make an annual work summary of the past work. We should know that work summary can directly show the gains and losses of a year's work. How to write a work summary can leave a good impression on people? Please read our annual work summary of petroleum technology for you and me. I believe you can find something useful for yourself. Annual Work Summary of Petroleum Technology (Part 1)

Summary of Technicians' Work in 2xx Petroleum Company

XX year is about to pass. Under the guidance of the leaders of the center and with the care and help of the masters and colleagues in the process room, I have been strict with myself ideologically, worked hard and diligently, actively learned from the masters and colleagues, and successfully completed the tasks arranged by the leaders and departments. The report of 2XX is summarized as follows:

1. In terms of ideology, we should seriously study and deeply understand the basic knowledge of the Party and the study of relevant political and ideological documents and books, and at the same time, seriously study the recent important documents of the Party and regard them as the ideological program and the guide for action; Actively participate in various political learning and educational activities organized by the Party branch of the Central Committee, and understand their responsibilities; Play an exemplary role in the work, strive to be an example for the broad masses of workers, and constantly improve their theoretical level and comprehensive quality.

2. At work, 2XX was my first complete year in the technical department. During this year in the process group, the leaders of the technical department gave full care, and the master and colleagues of the process group gave me guidance on my work, so that I could get into the work as soon as possible and have a certain understanding of heavy oil technology. The master and colleagues gave detailed guidance on my design and summary materials, and explained the construction curve.

3. Research and support related technologies such as steam huff and puff, profile control, sand control, fracturing, acidification, etc. of heavy oil in Shengke Management Area, timely track the effect of measures wells, timely analyze the effect of wells with poor measures, and put forward suggestions for the next step; In this year, more than 5 process designs were completed and a number of summary materials were completed; I have a certain understanding of various technologies in Shengke management area and a general grasp of the block situation.

3. Actively participate in various technical activities and competitions, improve their practical working ability, participate in the rally of young scientific and technical personnel of the Bureau and successfully enter the finals. At the spring exploration and development technical symposium of the 2XX Petroleum Development Center, the paper "Application Analysis and Evaluation of Injection-Production Integration Technology in Extra-heavy Oil Blocks" won the third prize; In the qc Excellent Achievement Competition of Petroleum Development Center in 2XX, the book "Improving sand control efficiency of heavy oil thermal recovery wells" won the second prize of excellent achievement.

4. Constantly improve the understanding of sand control, profile control, mechanical recovery and other technologies for heavy oil, insist on following wells in key construction, and master first-hand information; Always maintain a rigorous and serious work attitude and meticulous work style, diligent and hard-working.

5. While constantly learning professional knowledge, actively develop one's hobbies and specialties, actively participate in various central cultural and sports activities organized by the Youth League Committee, and win the honor of outstanding youth league members of the Petroleum Development Center; In terms of style, I always demand myself by party member standards, abide by the rules and discipline, unite with my colleagues, be realistic and optimistic, carry forward the fine tradition of hard work, hard work, and helpfulness in my life, always bear in mind party member's responsibilities and obligations, and be strict with myself.

6. Adhere to the correct outlook on life and values, at the same time, strengthen the study of relevant theories, strengthen your own beliefs, be self-disciplined, be innocent and do things honestly.

With the step-by-step construction of the million-ton center, I know that the future work will be more arduous and demanding. At the same time, I have short working hours and lack of experience, and I have a lot to learn and master. Therefore, I will work harder, learn more from the leaders, masters and colleagues in the technical department and process room, and constantly learn to expand my knowledge and strive to improve my various work skills. Contribute to the development of the center

2XX annual work plan for technicians of oil companies

We should do everything well in the process of oil production, do every job meticulously, and complete all tasks with high standards, high quality and high efficiency.

1. learn from the advanced working methods of investigation and study, carry out the work policy of the unit, study and practice Scientific Outlook on Development seriously, and strive to improve the comprehensive management level of the oil production brigade.

2. Improve the internal information of the oil production brigade, combine the actual work of the oil production brigade, sum up the gains and losses of the work, formulate the management methods suitable for the actual work of the brigade, and put them into practical work.

3. Strictly implement various management systems, assessment systems and management methods, refine the assessment methods of oil production brigade, consolidate work responsibilities and improve work efficiency.

4. actively seek the scientific development path, strictly control the production cost, and strive to complete various production tasks.

The production and operation of the oil industry can't be completed by one or two people. It needs the cooperation of teams to complete all kinds of things. A drilling crew needs everyone to take part in dismantling, moving, installing and drilling equipment in one day. Any problem in any link will affect the overall efficiency.

The same is true for production units. Everyone needs to do their part in data acquisition, collation, analysis, formulation of corresponding measures and engineering construction. Everyone is busy with their work. Annual Work Summary of Petroleum Technology (Part 2)

Time flies, and inadvertently our steps have reached the end of 2xx.

In 2xx, the technical department operated normally with the correct and effective guidance of the company leaders and the support and cooperation of other departments, and strictly implemented the company's management system and responsibility system. The following is a brief summary of the work of the technical department in 2xx years.

1. Main work completed in 2xx

(1) Scheme design and technical disclosure

1. Survey, design, medium-voltage defense line and earthwork quality supervision. By the end of the year, more than 4 buildings have been surveyed and designed;

2. Complete the branch line of the main medium pressure pipeline in the west of Nanxin Street for more than 25 meters;

3. Compiling the overall and sub-projects for more than 28 times;

4, according to the actual project progress, complete the technical disclosure and operation guidance for each construction team.

(2) Collation and approval of technical data

1. Up to now, * * * has completed 34 volumes of project completion data in 2xx and 2xx (143 volumes in total), and all of them have been submitted for approval, and 27 volumes of project completion data in 2xx have been completed;

2. Send the monthly report of natural gas statistics to Xianyang Development and Reform Commission for 17 times;

3. Collect engineering material certificates and technical data and bind them into a book.

(3) On-site technical service and quality control

1. Technical disclosure was issued before construction, so that the construction process was strictly controlled according to the design, specifications and technical disclosure. After completion, all kinds of technical data could be filled in in in time to assist other departments in monitoring the construction team together. During the construction process, a standing-by system shall be implemented to provide technical guidance to the site in the whole process < P >;

2. Be diligent in guidance. Our technicians are diligent in mouth, legs and hands. Mouth-to-mouth refers to speaking more at the construction site, being good at speaking, and correcting and stopping irregularities when seen at the site. The disclosure of each process can be made clear to the construction workers until they are clear, so that the construction workers not only know what to do, but also need to know how to do it well. Leg attendance refers to regular on-site inspection, supervision and guidance, to nip mistakes in the bud, eliminate problematic projects and minimize rework. Hand-service refers to the careful, detailed and timely disclosure to the shift. Every working procedure and link has detailed technical disclosure, which not only makes people understand it, but also makes everyone in the construction understand it.

3. Improve the inspection system. A strict inspection system has been established, so that someone will inspect the place where there is construction and make detailed records. Technicians not only check during the construction process, but also conduct final inspection after the shift self-inspection is qualified; Carry out irregular inspection at any time, so as to better find the problems existing in the construction process and correct them in time.

4. quality control. Strictly control the quality to ensure that every project we do is qualified. Give full play to everyone's subjective initiative, everyone will control the quality, everyone knows the importance of quality, and ensure the quality of the project. There have been no major quality and safety accidents since this year.

(4), project acceptance

After the completion of the project, timely organize relevant departments to conduct the completion acceptance of the project quality and material usage;

(5) Handling other technical work of the company and other matters arranged by the leaders

2. Shortcomings in the work

1. Most of the technicians are new employees, so we need to speed up the improvement of our theoretical level and practical operation.

2. Quality control methods need to be improved. In this year's construction, there are still many shortcomings in quality control, the management ideas of quality control are not clear, and the key points of quality control are not prominent.

Third, the plan and requirements for the next step

1. Enhance the sense of responsibility

Carry forward the hard-working spirit of each technician and enhance everyone's sense of responsibility. Strengthen study after work, treat every job correctly and seriously, attend work on time, make effective use of working time and stick to your post. Ensure that every construction task arranged by superior leaders can be completed on time. We are all young technicians and inexperienced, so we dare not neglect our work at all.

2, improve the working methods FZ76.Com

(1), working methods: write down the gains and losses in the work and the problems that appear every time in order to learn lessons, consult relevant information and communicate with others in time when encountering difficult problems, and listen patiently to the suggestions put forward by others.

(2) working method: before each construction task, correct your attitude, set work objectives, and then put yourself into production activities, and always remind yourself not to make mistakes during construction.

3. Keep innovating and be proactive

In the future work, sum up experience in time, learn lessons, actively listen to rationalization suggestions, consult more seniors, boldly carry out technological innovation, abandon old ideas and keep innovating.

2xx's work practice has brought us many lessons. 2xx is a crucial year for the technical department. We should strictly control the quality of the project, make every effort to carry out it quickly, comprehensively promote the work of the engineering department, and finish the tasks assigned by the leaders in time. All departments

work closely together, and Qi Xin will work together to achieve the great goal of Hongyuan Gas. Summary of annual work of petroleum technology (Part 3)

I. Personal profile

From September to July of XX, I studied building environment and equipment engineering (building thermal energy engineering) at Harbin Institute of Technology; From July of xx to the end of October of XX, I worked in Wuhan Gas Thermal Planning and Design Institute for gas and thermal design. I have worked in the company since the end of October, xx.

In September of xx, I participated in and passed the qualification examination (basic subject) of XX national registered public equipment engineer (power); In September of xx, I took part in and passed the qualification examination (basic subject) of national registered public equipment engineer (HVAC) in xx.

2. Performance at work during the probation period

1. Strictly abide by the company's rules and regulations. At the beginning of work, I carefully studied the company's attendance and other rules and regulations, and kept them in mind, always reminding myself to strictly abide by the company's rules and regulations and maintain the company's image.

if I insist on coming to work early every day, I will always remind myself that I represent the image of the company and pay attention to my words and deeds.

2. According to my major, my job is to design power, HVAC. According to the arrangement of the leaders, I have been in contact with the project of Asia Aluminum since the day I came to work. Under the guidance of Master Zhang Fanghao, I mainly do the power design work in this project, mainly including the pressure pipeline design of compressed air, industrial gas, steam, natural gas and other gases. Before that, I have never been in contact with such a project. This project is brand new to me, not only in terms of knowledge, but also in terms of form. The method of doing things is completely different from my previous work, and I suddenly feel an unprecedented sense of pressure and urgency. On the premise of not disturbing Zhang Fanghao's work, I try to consult him as much as possible, and of course I have to learn mainly by myself. In the gap between work, I consult various materials and keep learning about compressed air and industrial gases, so as to do a better job. This project of Alcoa tests whether my knowledge is suitable for this job from all aspects, including language, because the information provided by the owner is in English, which makes me have to improve my English level. At work, I consult reference books to help me understand. After work, I strengthen my English study by learning software, so as to improve my English level. Now the project of Asia Aluminum is still going on. Up to now, I find that I have adapted to this brand-new way of working, and I also feel that I have the ability to continue this project until it is successfully completed.

during these three months, in addition to the project of Alcoa, I have successively completed the following projects: gas project for the staff canteen of Zhongcheng Building, air conditioning project for the newly-added air compressor room and refrigeration room of Changxing (Guangzhou) Electronics, gas project of Nansha in Guangzhou Steel (completed) and preliminary design for the newly-added workshop of Aipai Mould. Through the completion of the above work, I have a more comprehensive understanding of my work, and I also realize that as an engineer in MCC South, I should have a good learning attitude and learning methods, as well as a solid professional foundation and familiar design software operation ability, and dare to put forward my own ideas and plans and dare to innovate! Of course, good language skills are essential to communicate with leaders and colleagues and put forward their own ideas.

III. Shortcomings in my work and the direction of my future efforts

In the past three months, although I have completed some tasks and made some achievements, there is still a certain gap from the requirements of the leaders. I also know that there are some shortcomings: for example, when I first came to work, I could not calm down and concentrate on my work because my emotional problems were not handled well; In addition, the initiative of the work is not enough, the foresight of the follow-up arrangement of the work is not enough, and there is still a certain distance from the requirements of the leaders; In practical work, sometimes I feel lack of professional knowledge and experience. But these shortcomings and deficiencies, in the future.