Workshop safety hazard investigation and rectification report

Workshop safety hazard investigation and rectification report Part 1

In order to firmly establish the safety production policy of "safety first, prevention first", strengthen the investigation and rectification of safety hazards to ensure that personnel Safety and equipment operation safety ensure the company's safe production.

1. Investigation content

1. Personal safety: Employees in the workshop are fully equipped with labor protection equipment, safety training is provided before starting work, and safety production of employees will be emphasized before work.

2. Equipment safety: All major safety hazards of workshop equipment have been eliminated.

3. Fire safety: The safety warning signs in the workshop are in good condition, fire extinguishers are fully equipped everywhere, and the fire extinguishers are in good condition.

4. On-site safety: Debris and broken glass in the workshop should be cleaned up in a timely manner.

5. Traffic safety: Employees are required to abide by traffic laws when riding to and from work.

2. Existing safety hazards and corrective measures

1. Some employees in the workshop have weak safety awareness, and employees’ safety awareness will be further strengthened through training and class meetings.

2. The equipment point inspection work is not detailed enough. It is necessary to further strengthen the point inspection work of equipment to ensure the safe operation of workshop equipment.

3. The fire extinguisher equipment is not complete enough. The existing three bottles of fire extinguishers in the workshop need to be supplemented. The equipment and supplement must be applied and registered with the company.

4. Sometimes the broken glass on site is not cleaned up in time. We should further strengthen the standards in line with the actual site.

3. Gas Safety

According to the specific conditions of the workshop, the following gas operation procedures and specifications have been formulated to ensure the use of gas safety specifications

1. Natural gas Breathing operation of the bottle

2. Safety regulations for natural gas use

3. Natural gas inspection and maintenance

4. Natural gas leak detection methods and emergency leak treatment.

To ensure the use of gas safety regulations

At this point, the investigation and rectification of safety hazards in the vacuum tube workshop have been completed or reported. In the future work, our vacuum tube workshop will continue to actively cooperate with the company's safety rectification work and strive to do a good job in workshop safety. Workshop Safety Hazard Investigation and Rectification Report Part 2

1. In response to the occurrence of thefts in surrounding units and the special period at the end of the year, the production department has strengthened the visitor registration management system, and unknown persons will never be allowed to enter the production workshop. All doors and windows in the production workshop should be closed during commuting. (The supervisor of each section is responsible for the supervision)

2. All electrical facilities and equipment in the workshop will be powered off when no one leaves. Strengthen the management of the keys of all distribution boxes and assign them to the responsible person. Distribution box doors are not allowed to be opened. (Each team leader is responsible and the section leader supervises)

3. Clear obstacles around all fire-fighting facilities and leave fire escape passages. (The supervisor of each section is responsible for the supervision)

4. Classify the wire ropes and spreaders, and mark the load-bearing tonnage of the wire rope spreaders. (The production department is responsible)

5. Personal workshop supplies (gloves, tea cups, etc.) and auxiliary tools must not be placed randomly. They should be placed on the upper side of the tool box according to the temporary regulations. The surfaces of the machines and equipment in each group should be clean and free of excess. 6. Store semi-finished products in the workshop and make semi-finished product display cabinets (drawings issued by the technical department) to form a unified standard, orderly and tidy uniform. (Supervision by the Production Department)

7. Storage of raw materials in area: Profiles and plates must not be stored beyond the pedestrian passage and must be stored neatly in the specified area according to specifications. (The head of the cutting section is responsible)

8. Cleaning up waste in the workshop. Clean up the waste in the waste box in a timely manner according to the actual situation, at least once every three days. (Each team leader is responsible)

9. Small tools and public tools should be handed over to the warehouse for management in a timely manner after use, and should not be left unattended. (Supervision by the head of each section)

10. Make corresponding category labels in the storage areas of various gas cylinders in the workshop (report to the General Office), and urge warehouse personnel to strictly follow the storage regulations: all gas cylinders must have anti-shock rings, cap.

(Production Department)

11. In all units related to gas operations in the workshop, all types of gas cylinders must turn off the gas source in time when not in use, and all gas cylinders must be placed with anti-dumping devices. (Each section leader is responsible)

12. The storage of standard and large parts in the workshop shall be temporarily placed on the side of the rest area of ??the assembly workshop. They will be stored in the warehouse for unified storage after the warehouse is built.

13. Improve the process trolley to prevent the center of gravity from endangering personnel safety when placing the carriage (welding section) Workshop Safety Hazard Investigation and Rectification Report Part 3

In order to standardize the production workshop On-site management, personnel management and production process control, the Xiangjia Nanchang office workshop rectification report is as follows:

1. Workshop inventory management

1. The warehouse will count the existing finished product inventory. Organize and file.

2. The workshop will collect statistics on existing material inventory and organize them into files.

3. Business and procurement refer to the existing inventory in the workshop and warehouse, and note the inventory quantity when receiving the order.

4. After placing orders in famous stores, complete workshop operations on time and strictly control the completion level of daily orders.

5. When the workshop receives an order and ships out of the warehouse, the inventory quantity must be reduced and submitted to finance for timely statistics.

6. Carry out warehouse inventory in a timely manner every month, and conduct financial verification and accounting.

7. Gradually control working hours and reduce overtime.

8. Control material loss, check the production quantity to the final shipment quantity, and find the reasons for material loss.

9. The workshop must issue a warehouse receipt for warehousing, and the warehouse must issue a warehouse receipt for shipment. If replenishment occurs, a replenishment document must be issued, and the reason must be noted and signed by the supervisor before the warehouse can Provide replenishment.

2. Workshop 5S management

1. The workshop director is responsible for supervising the implementation of workshop sanitation work and monitoring the health status of workshop workers. Workshop staff shall do a good job in cleaning and sanitation of the area as required.

2. Arrange and place equipment, tools, finished products, raw materials, etc. according to the workshop placement regulations.

3. The floor is clean, no dust, no garbage, no stains, no water accumulation, and no dead corners.

4. The walls (corners) and ceiling are clean, free of pollution, no cobwebs, and no dead corners.

5. Doors and windows are bright and clean, with no dust, stains or cobwebs.

6. Lighting and sterilizing lamps should be kept clean and free of dust accumulation.

7. Keep tables and stools clean and items neatly stacked.

8. The pools and underground sewers are clean, the drainage is smooth, and there are no obstructions.

9. The stairway is clear.

10. The responsible area around the workshop is clean, free of garbage and cigarette butts.

11. Keep toilets and hand-washing areas clean, with no accumulated water on the floor and no stains on the walls.

3. Inspection and Assessment

1. The workshop director is responsible for conducting internal inspections on the hygiene work in the workshop, supervising employees to make corrections if problems are found in a timely manner, and including them in the individual's monthly performance appraisal .

2. The office conducts a health inspection of the production area once a week. If the inspection fails, the relevant responsible persons may be punished. Workshop Safety Hazard Investigation and Rectification Report Part 4

Strengthen the investigation and rectification of safety hazards, and firmly establish that "safety is the eternal theme of the enterprise, safe production is an important part of enterprise management and is the basis for the healthy development of the enterprise." Concept, gradually form a healthy corporate safety culture and create a strong safety atmosphere to ensure personnel safety and safe production of the company.

1. Investigation content and investigation situation:

1. Personal safety: All employees in the workshop wear safety protective equipment neatly and receive safety training before starting work. Employees are required to be safe during pre-shift meetings. homework and regular safety lectures.

2. Equipment safety: Major safety hazards in workshop equipment and special equipment have been eliminated.

3. Fire safety: Warning signs are in good condition throughout the workshop, and fire extinguishers are fully equipped everywhere.

4. Site safety: The workshop safety guardrails are complete, materials are stacked uniformly, the mountain flood interception ditch and main flood drainage ditch behind the high-level pool and roller mill are unobstructed, and after screening, it is a bulwark to prevent water and soil erosion. Under construction.

5. Traffic safety: The company requires employees to abide by traffic laws when riding motorcycles to and from get off work. It is strictly prohibited to drive on the road without a license or license plate, speeding or overloading.

6. Food safety: The food safety and hygiene in the canteen is qualified.

7. Construction safety: Check the safety ropes and safety belts of all employees working at heights in the workshop and construction team.

2. Existing safety hazards and corrective measures:

1. The safety guardrails of the ball mill are damaged and need to be repaired, and the slope of the guard ladder is too steep and needs to be improved.

2. There is too much debris in the ball mill and roller grinding positions, requiring post personnel to sort it out.

3. The cable trenches at old line ball mills, roller mills, and CH880CH870 need to be covered.

4. The high-altitude cables under the broken 14# belt need to be laid underground and the wires connected by the external construction team are required to be handled in a standardized manner.

5. The New Line Ball Mill Transmission Department requires mechanics to weld protective railings.

3. Safety management:

1. It is necessary to further strengthen the spot inspection of workshop equipment, especially special equipment, to ensure the safe and stable operation of workshop equipment.

2. Regular self-examination and self-correction of hidden dangers, organizing team leaders and other personnel to carry out special inspections of workshop equipment, especially special equipment, and promptly rectifying the identified problems.

3. Safety management should be more comprehensive, solid, in-depth, and pragmatic, penalties should be further increased, and safety measures should be more standardized and refined.

4. The workshop strictly requires team leaders to supervise and guide the process monitoring of various processes and operations on site to ensure that all operations are safe and standardized.

5. Strengthen safety training in the workshop and improve employees’ safety awareness. Vigorously investigate safety defects and hidden dangers, carry out rectification and implementation of the discovered safety hazards and weak links, adopt all feasible methods and measures, and effectively increase the rectification efforts, so as to never let go of any hidden dangers and leave no dead ends. According to After inspecting the situation, we promoted the rectification of potential safety hazards in a planned and step-by-step manner according to priorities, and carefully implemented safety precautions for staff, laying a solid foundation for the long-term and healthy development of safe production work.

In short, safety work is a comprehensive task that relies on the joint efforts of all workshop employees. We must pay close attention to illegal operations, deal with them seriously when encountering problems, and never show mercy. In the future safety work, all employees in the workshop must unite as one, sum up past experiences and lessons, work diligently, continue to carry forward the work style of loyalty, responsibility, dedication and pragmatism, and protect the safe operation of the company's production system. Workshop Safety Hazard Investigation and Rectification Report Part 5

In order to further strengthen and improve the safety production work in the workshop, respond to the call of the center, and effectively protect the life safety and property safety of the majority of employees, our workshop regularly carries out safety self-inspections. Now The self-examination situation is summarized as follows:

1. Correct attitude in mind. All personnel in the workshop should clearly understand the situation, firmly establish the awareness of the main body of fire protection responsibility, and effectively enhance the sense of responsibility and urgency for fire safety work.

2. Strengthen safety awareness education. Safety awareness education was conducted for workshop members, focusing on emergency response plans and handling, and hospital fire protection plans to improve their ability to protect themselves and save themselves.

3. Carry out fire safety and other hidden danger inspections. Actively cooperate with the factory requirements to carry out special inspections of safety hazards within the workshop, and check the fire and smoke prevention equipment settings in the workshop, the use and maintenance of power lines, and cigarette butts and other flammable materials. No abnormalities have been found so far.

4. Strengthen the safe use of power equipment. Workshop members have been trained on the safe use of various electrical facilities. They ensure that the power supply in the workshop is safely turned off before leaving get off work every day. No abnormalities have been found so far.

Safety work is a long-term job. Our workshop will strictly pay attention to safety, lay a solid foundation for safety management, continuously improve the safety awareness of workshop personnel, clarify their respective responsibilities, so that various tasks and requirements of safety management can be better implemented, and ensure the normal and orderly work of the factory. Order provides a sense of security.

Workshop Safety Hazard Investigation and Rectification Report Part 6

In order to effectively carry out the company's safety production work in the second quarter and ensure safe and stable production operations, in accordance with the spirit of the relevant notices of the xx safety meeting and the company's 20xx safety production work arrangements, the company The leaders attached great importance to the notice and quickly conveyed the spirit of the notice to all departments and teams. At the same time, they held a safety meeting of the company's leadership team, arranged and deployed the company's safety workshop production work in the second quarter, implemented various safety measures, and conducted a safety production inspection of the company. Now The self-examination status will be reported as follows:

1. Implementation status of the safety production responsibility system

In order to clarify responsibilities, a company general manager was established as the first responsible person, and each department was mainly responsible Production safety leadership group with human members. In the work, we establish the concept of people-oriented and safety first, and put forward high-level requirements for the heads of each department to manage production and understand production. The company is equipped with full-time safety officers, and has formulated a safety production job responsibility system that suits the company's characteristics. It has decomposed the safety production responsibility system layer by layer, strictly implemented the responsibility subjects, and truly achieved clear responsibilities, assigned responsibilities to each person, and everyone's duties. duties to ensure the smooth development of safety production work.

2. Self-examination status

(1) Fire-fighting facilities: The raw material yard of the company's Marketing Department and each team are fully equipped with fire-fighting equipment, including fire boxes and fire-fighting equipment. Dry powder fire extinguishers are all in Within the validity period. Implement the fire safety responsibility system step by step, improve emergency rescue plans, and strengthen emergency drills. Conduct special inspections and rectifications on fire protection facilities such as offices and production teams. Focus on careful inspection of fire-fighting facilities and fire-fighting equipment to ensure nothing goes wrong. Smoking is strictly prohibited where there are oxygen bottles and acetylene bottles.

(2) Equipment safety: The company organizes personnel to focus on checking whether pressure vessels and pipe network pipes have usage licenses and whether they have undergone regular inspections. The leakage of some power lines in the production workshop discovered during the early inspection without any protection has been improved. The cables in the raw material storage area were crushed or cut by passing vehicles. All of them have been replaced and reinforced. It is necessary to strictly prevent the operation of various facilities with diseases and ensure that special operators have certificates to work and whether the equipment is in good operating condition.

(3) The company office strengthens vehicle management; requires drivers to strictly abide by relevant laws and regulations on urban and highway traffic management, strengthen professional ethics, and ensure driving safety. Timely correct and severely crack down on fatigue driving, speeding and overloading and other illegal behaviors, conduct frequent comprehensive inspections of vehicle safety performance, prevent hospital vehicles from taking the road, equip fire-fighting equipment to prevent spontaneous combustion and fire accidents, and ensure vehicle driving safety.

3. Determination of major hazard sources and emergency situations

Based on the company’s own conditions, through the investigation of unsafe behaviors at work, unsafe conditions of items, and unsafe working environment Risk assessments were conducted on various factors, and major hazard sources were identified. The purpose of preventing accidents was achieved by formulating corresponding emergency plans or management plans. The major hazard sources identified by the company are:

①Working at high altitudes;

②Pipe network burst;

③Mechanical injury;

⑤Flood;

⑥Construction electricity. The company's full-time safety officers regularly inspect key locations such as the hydrolysis workshop, raw material storage yard, power distribution room, tank area and boiler section, and strictly abide by the safety production inspection system, conducting major inspections at least once a month. During the inspection or inspection process We will formulate rectification measures for potential safety hazards discovered during the operation, specify the rectification deadline, and strengthen supervision and inspection to ensure that the rectification of hidden dangers is effective.

The company has formulated special emergency plans for major hazards such as fire, flood control, and pipe network bursts. The rescue procedures and rescue measures in the plans are complete, and the plans are coordinated and closely connected. The company has conducted training and drills on various plans, and ensured that relevant personnel should be aware of and master them proficiently.

4. Insufficiencies

(1) Some of the company’s power supply lines are aging and need to be replaced urgently to avoid fire hazards when the electricity load increases during summer operation.

(2) The company's automatic boiler has been renovated, the operating skills of employees have been further improved, and the training on safe operation knowledge of automatic boilers has been strengthened to ensure the normal operation of the boiler.

(3) The safety awareness and safety quality of some workshop employees need to be further improved. They must continue to adopt various forms to do a good job in safety production publicity, especially to strengthen production safety and fire safety publicity, and further improve The safety awareness of company employees. Workshop Safety Hazard Investigation and Rectification Report Part 7

According to Junjiaobanfa [20xx] No. 92 document, the notice on launching the "National Safety Production Month" activity in 20xx, combined with the actual situation of our school, closely focused on The theme of National Work Safety Month is "Care for Life, Safe Development", and this activity was carried out within the school from x month xx to x month xx, 20xx. The activities of this production safety month are summarized as follows:

1. Leaders pay attention to it and organizational measures are in place.

In order to strengthen the organization and leadership of this safety production month activity and ensure the effective implementation of safety production month activities, Principal Li of our central school is personally responsible for the organization and implementation of this safety month activity. The vice principal in charge of safety Focus on details and all employees will actively cooperate. In early June, the central school organized all teachers to study Junjiaobanfa [20x'x] No. 92 document seriously, and according to the requirements of the document, we carefully organized this activity around the theme of "Care for Life, Safe Development" so that Our school's "Safety Production Month" activities have been on a normal track of organization, leadership, and planning since the beginning, and no safety accidents of any size occurred in the entire school during this safety month activity.

2. Carry out various forms of educational activities.

At the beginning of June, all faculty and staff were organized to learn laws and regulations related to safety, and through learning to enhance employees’ safety concepts and create a campus safety education atmosphere. In early and mid-June, our school strictly followed the spirit of Document No. 92 and focused on the following activities:

1. Hang the "Safety Production Month" activity slogans on campus and streets, and paste promotional slogans and posters. The class publishes safety blackboard reports and handwritten reports.

2. A safety knowledge lecture was held at the central school, and a safety knowledge competition was organized for senior students. The test questions were mainly based on daily safety knowledge. The test questions are in the form of multiple choice, judgment, and short answer questions, with a total score of 100 points. Exam results: The highest score was 98 points, the lowest score was 83 points, and the average score was 91 points. Passing this exam truly reflects students' mastery of safety knowledge. Prizes were distributed to the winning students who participated in this competition to encourage them.

3. Promotional materials for this production safety month were also distributed to students during the event.

4. Organized all students in the school to take turns watching the self-recorded "Youth Safety Education Activity Film" and achieved good results.

3. Take the safety month as an opportunity to implement rectification of hidden dangers and focus on actual results.

In order to implement the safety month activities, the leaders in charge of our school often conduct safety inspections throughout the campus. Immediately point out any adverse phenomena that occur during the inspection and deal with them immediately. Solve the identified problems if they can be solved. Through inspections, the safety of the school is further improved.

The hot summer has arrived. In order to prevent heatstroke, fire, flood, lightning and infectious diseases, schools have made careful arrangements, and some have also formulated corresponding work plans.

Through this safety production month activity, our school's safety management work has been brought to a new level, and it has also enhanced the sense of responsibility of relevant managers and the safety awareness of teachers and students. It also laid a solid foundation for future safety work. Workshop Safety Hazard Investigation and Rectification Report Part 8

I believe that as a state-owned enterprise, the responsibility for safety production is even greater. In safety management, we should focus on the following six aspects:

1. Leaders’ attention is the prerequisite for good safety management

The key to whether safety production is good or not lies in leadership. Analyzing the causes of major accidents, many accidents are due to the lax safety awareness of a small number of corporate leaders, which will lead to management loopholes. Therefore, we should look at the company's own situation, strive to explore its own gaps, and constantly promote accident risks through comparison. rectifications to prevent similar accidents from happening. At the same time, the leadership's attention is also an objective guarantee for the smooth development of safety management. Only with the leadership's high attention can various regulations be formulated, implemented, and executed, and the inspection, rectification, and monitoring of hidden safety accidents can be ensured.

2. Improving the safety management system and the implementation of the responsibility system are the core

A relatively comprehensive set of safety production rules and regulations and the effective implementation of safety responsibilities are the core for enterprises to do a good job in safety. At the beginning of the year, the signing of the production safety responsibility letter and the risk deposit effectively promoted the implementation of safety responsibilities. It not only mobilized the enthusiasm of employees to participate in safety production, but more importantly, clarified responsibilities and improved safety awareness.

3. Relying on scientific and technological progress and increasing investment in safety are the guarantee for safe production

In the past two years, a number of safety technology transformation projects have been implemented, and equipment updates and safety The management of hidden dangers not only improves the intrinsic safety of equipment, but also provides a solid foundation for safe production.

4. Publicity and education is still an effective method to improve safety production

The improvement of safety awareness and safe operation skills of employees cannot be separated from publicity and education. Publicity is to learn new knowledge. , new thinking, and new laws and regulations. Through various forms such as blackboards, station signs, slogans, and broadcasts, we publicize and organize safety skills training for special operations personnel, team leaders, and new employees entering the factory, which plays a positive role in improving the safety quality of all employees. role.

5. Safety inspection is the most direct means of safety supervision

Only through continuous inspection can the existence of safety hazards be discovered and rectified, so as to nip them in the bud. Adhere to on-duty safety inspections by cadres; inspections by professional safety management personnel and regular and irregular safety comprehensive inspections not only effectively ensure the smooth progress of safe production, but also play a positive role in the management of safety hazards, proactively taking preventive measures and formulating plans. .

6. Adopting advanced management methods is the continuous driving force for safe production

Actively implementing and developing advanced methods is not only the supervision of safe production from different angles, but also the safety technical personnel at all levels. The process of mastering advanced information and gradually learning and improving. At the same time, it increases the diversity of management methods and the breadth of employee safety information, and promotes the continuous progress of safety production management.