What is the procedure for changing the registration of motor vehicles in Yinchuan?

The circumstances in which an application for change of registration should be made: (1) changing the color of the body of a motor vehicle; (2) Replace the engine; (3) replace the car body or frame; (four) due to quality problems, the manufacturer replaces the whole vehicle; (five) the operating motor vehicle is changed into a non-operating motor vehicle or a non-operating motor vehicle is changed into an operating motor vehicle; (6) The domicile of the motor vehicle owner has moved out of this Municipality or moved into the jurisdiction of this Municipality. Two, under any of the following circumstances, without affecting the safety and identification number plate, the owner of the motor vehicle can replace it by himself, without going through the registration of change. (1) Anti-collision devices before and after installation of small and micro passenger cars; (two) freight motor vehicles equipped with windshield, water tank, toolbox, spare tire rack, etc. ; (3) interior decoration of motor vehicles, etc. ; (four) motor vehicle spraying, sticking signs or body advertising. However, the following regulations shall be observed when spraying, pasting logos or advertising the body: 1. Spraying and pasting car body advertisements must be approved by Beijing Outdoor Advertising Management Office, and advertisements may not be posted on the car body without approval. 2. If the logo is sprayed or pasted on the exterior of the motor vehicle body (excluding the window glass, front and rear windshields and the front and rear parts of the vehicle), the contents allowed to be sprayed and pasted are: company name, enterprise logo, telephone number, address and website address. Painting handwriting should be correct, and the font size should not be greater than10% of the body height; The area of handwriting and logo color shall not be larger than 1/3 of the main color, and the overall body color shall not be changed. The body color registered in the original driving license and motor vehicle registration certificate shall remain unchanged. 3. Heavy-duty and medium-sized trucks and their trailers shall be painted with the same amplification number as the number plate font at the rear of the car body, and the magnification shall be 2.5 times of the number plate font, and the writing color shall have obvious color difference with the car body; The words "van" and "closed truck" are respectively sprayed on both sides of the van body; On both sides of the doors of large trucks and large and medium-sized buses, words such as deadweight tonnage and the number of passengers allowed should be sprayed. Engaged in business, it should spray the name and business number of the business unit, the handwriting should be correct, and the color difference between the color and the body color should be clear. ?