Management system for the use of safety warning signs on the construction site?

In order to standardize the setting of safety warning signs and ensure the safety in the production process, our company has formulated a system. I. Management Rules for Safety Warning Signs 1. Site safety signs are used to express specific safety information, remind people of unsafe factors, and play a warning and safety role in preventing accidents. 2. The signs purchased and made by the project department must meet the requirements of civilized construction site standards. 3. The height of the signboard should be consistent with the height of human eyes as much as possible. The angle between the signboard plane and the human eye's line of sight should be close to 90 degrees, and the maximum angle of the observer at the maximum observation distance should not exceed 75 degrees. 4. Construction signs should not be placed on movable items such as doors, windows, shelves, etc., so as to avoid invisible signs after these items move, and do not place obstacles that hinder reading before signs. 5. The sign layout of the construction site must be designed in advance and then arranged. The person in charge of technical safety of the project shall design targeted and reasonable safety signs, floor plans and other safety and civilized signs required by the owner according to the actual situation on site, and make corresponding arrangements. 6. Safety signs on the construction site shall not be moved at will. If it is really necessary to move, it should be approved by the project manager, and all employees should be informed in time after filing. 7. Check the signs at least once a month. If deformation, damage, fading and other nonconformities are found, they should be repaired or replaced in time. 8. The Project Department will assign special personnel to manage the site signs, and those who damage or steal the signs will be dealt with severely. 9. After the completion of the project, the project department shall collect and keep the signs in a unified way for the subsequent projects to continue to use. Two. Set the location and principle 1. Safety signs must be set up in conspicuous places to remind people of safety. 2. In public places with crowded on-site personnel, signs of "safe passage" must be set at emergency exits, evacuation passages and stairwells. Stay away from the safe passage, the arrow of the "safe passage" sign must point in the direction leading to the emergency exit. 3. In the construction of roads or other places where non-construction personnel often pass, appropriate safety warning signs should be set according to relevant traffic laws and regulations. 4. The setting of the near-edge hole of the building meets the requirements of Technical Specification for Safety in Working at Heights. 5. The setting of temporary electricity signs shall conform to the standards of relevant electricity consumption codes. 6. The mark setting of all machinery shall comply with the regulations of relevant professional machinery. 7. During line construction, a warning line shall be set around the hole excavated by earthwork, warning signs shall be set, and warning lights shall be hung at night. When the construction site is on the road, warning signs or traffic guidance should be set at a certain distance from the construction site according to traffic regulations. 8. During on-site construction, safety warning signs should be set at the entrance of the construction site, scaffolding, openings, stairs, holes, bridge opening, tunnel openings and foundation pits. 9. Set up obvious safety warning signs in high-voltage lines, high-voltage telephone poles, high-voltage equipment, lightning strike high-risk areas and places where explosives, harmful and dangerous gases and liquids are stored. 10. Other places where safety signs are set. 1 1. Safety warning signs must conform to the national standard GB 2849- 1996 safety signs and GB16179-1996 safety signs instruction and GB 2893-200/kloc-0. Attachment: safety colors and safety signs 1 interpretation. Safety warning signs include: safety colors and safety signs. 2. Safety color refers to the color that conveys the meaning of safety information, including red, blue, yellow and green. (1) Red: indicates prohibition, stop, danger, etc. (2) Blue: indicates the instructions and regulations that people are required to abide by; (3) Yellow: indicates the idea of reminding people, and all devices, equipment and environment that warn people to pay attention should be indicated in yellow; (4) Green: It means providing people with permission and safety information. 3. Contrast color is the contrast color that makes the safety color more eye-catching, including black and white. 4. Classification of safety signs: prohibition signs, warning signs, indication signs and prompt signs. (1) The basic form of the prohibition sign is a circular border with diagonal lines; (2) The basic type of warning signs is regular triangle frame; (3) The basic form of indication sign is circular border; (4) The basic form of the prompt sign is a square border.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd