What are the safety protection measures on construction sites?

Safety protection measures at construction sites, let’s take a look at today’s article.

Safety protection measures at construction sites:

Requirements for protective materials:

1. Steel pipe: weldable steel pipe with outer diameter 48mm and wall thickness 3.5mm , no serious corrosion, bending, flattening, cracks and welding.

2. Fasteners: Must have factory certification, and fasteners must not have cracks, pores, blisters, looseness or other casting defects that affect performance. When the bolt tightening torque reaches 65N.m, no damage shall occur. The torsion torque of fasteners is generally 40-50N.m.

3. Scaffolding boards can be made of steel or wooden scaffolding boards, with the mass of each piece not exceeding 30kg.

4. Other materials must comply with national specifications, such as safety nets, safety helmets, safety belts, electrical boxes, leakage protectors, cables, etc.

3. "Five Edges" Protection

The "Five Edges" protection refers to the building facing edge, balcony facing edge, roof facing edge, lift opening facing edge, Safety protection facilities at the edge of the foundation pit;

1. A double-layer fence of more than 1 meter or a safety net must be installed for edge protection;

2. Protection for operations at high places near the edge The railings should be closed with a safety net from top to bottom;

3. A protective fence with a height of not less than 1.2 meters should be installed near the excavation of foundation pits, ditches and trenches.

4. "Three Treasures" and "Four Ports" Safety Protection

The "Three Treasures" are the three treasures for the safety protection of construction workers, namely, safety helmets, safety belts, and safety nets; "Enter" protection refers to the safety protection facilities at reserved openings, elevator shaft entrances, passage entrances, and stair entrances of projects under construction;

1. Protective railings should be installed at elevator shaft entrances and stair entrances, and protective sheds should be erected at entrances of passages. , the reserved holes should be equipped with protective railings and covers according to specific conditions;

2. All personnel entering the construction site must wear safety protective equipment correctly, and a dense-mesh safety net should be hung on the outside of the construction project to seal it.

Reinforcement is no small matter, and construction site safety is even more important. Only by taking good construction site protection measures can each building reinforcement project be better completed and completed smoothly.

5. Safety management measures

1. The project team leader or the project installation contractor is the first person responsible for safe construction and is fully responsible for the safe construction on site.

2. Construction site safety managers are full-time personnel responsible for on-site safety construction and are responsible for the supervision and inspection of safe construction.

3. Strengthen the publicity of safe construction and hang slogans and warning signs at prominent locations on the construction site to remind construction workers.

4. Personnel entering the construction site must wear safety helmets.

5. Construction machinery and tools should be inspected routinely before use every day. In particular, performance inspections of wire ropes and seat belts should be conducted once a week to ensure that they are in good condition.

6. During the installation process, the safety protection of on-site machinery, equipment, and completed projects should be taken into consideration. When the wind speed is 10m/s, sometimes the hoisting work should be stopped. When the wind speed reaches 15m/s, all work must be stopped.

7. Wear gloves when installing and handling components and panels.