Tips for purchasing simple bookshelves Process of making simple bookshelves by yourself

Study is an important part of house decoration. Although the study decoration looks simple, if you want to decorate it with satisfactory results, it will be more troublesome, such as the simplest bookshelf. Do you know any tips for buying simple bookshelves? Next, I will bring you an introduction about simple bookshelves. Let's have a look.

First, simple bookshelf purchase skills

1. Simple bookcase-safety first.

Most children are "adventurers". For them, safety is the primary consideration when buying a desk rack. The lines of the desk should be smooth, the edges should be rounded or curved, the switches should be smooth, and the finishes should be exquisite. Keep children away from sharp corners and hard and rough surfaces of desk shelves. In addition, you'd better shake the furniture a few times when you buy it, so you don't have to shake it if the structure is loose.

2. Simple bookshelves-materials should be environmentally friendly.

The books on the desk of children's study are as rich as children's furniture. There are wood, wood-based panels, plastics and so on. These materials have their own characteristics, but they must be based on a solid and practical premise. Specifically, it needs environmental protection and no odor. The surface coating should be indelible and scratch-resistant, and it is necessary to choose a plastic table or other harmless coating for the desk frame, because children often come into contact with these. This is very important.

3. Simple bookcase-scientific size selection

When choosing desks and bookshelves for children to study, we must also choose ergonomics. The size of desks and bookshelves should be combined with children's height, age and figure, which is beneficial to their healthy growth. Generally speaking, the standard length of children's desks is 1. 1 .2m, the height is 0.76m, and the width is 0.55-0.6m. The standard of chairs is 0.4-0.44m. The height is not more than 0.8m..

Second, how to make a simple bookshelf?

1. Prepare appropriate materials and tools. The width of the board is 23 cm and the height is 80 cm. Need two pieces. Four boards with a length of 60 cm and a width of 23 cm are needed, and the corresponding rear panel needs three boards. When ordering, you can set the size of the wooden hole according to your needs. And screwdrivers and screws.

2. Put the short board and the long board together and match the holes. Then insert the screws into the corresponding holes and tighten them with a screwdriver. Then unscrew the remaining three short boards and long boards respectively. When the shielding plate is placed on the rear side, a screwdriver is also needed and the corresponding screws are screwed into the holes. When finished, you can splice and tighten the second long board.

3. Wood of 32,700 *120 *18mm and plywood of at least 2 to 32,700 *1400 *18mm are needed. 3 extra-long screws with screws, paint and varnish. There are puzzles and exercises.

4. The back of the wall-mounted bookcase is a wall, and the shelf can be nailed to the wall and firmly fixed on the wall, which is not easy to replace. The size can be decided by yourself. For example, if you want to enlarge it, the shelf can be 2 meters wide and 2.7 meters high. It consists of 8 shelves, divided into 16 spaces. The shape of the shelf is imaginable.

5. Making brackets and shelves: cut the shape of the board, as well as brackets and shelves. The three boards used to make the bracket need to have the same size and can cut beautiful arcs on the bracket.

6. Narrow the gap. More complicated is the need to accurately see the notch of the shelf assembled with the shelf. Each shelf is cut into three notches, one in the middle and two 20 cm from both ends. The gap on the bracket can be cut according to actual needs. You can also adjust the position of the incision according to the size of the book.

7. installation. After the incision is completed, you can assemble all the plates, check whether they match well, and then disassemble them for painting. Finally, drill holes in the notches to place the top frame, insert screws, and then drill corresponding points through the wood and on the wall for fixing. If you are worried that the wood at the gap is too thin, you can drill holes in the wood above the gap. After all the shelves are installed, it is finished.

The above is the introduction of simple bookshelves that we have brought to you.