Inspection process slogan

◆ Production site publicity slogan (Class K): K0 1 Think carefully and operate strictly; Strict inspection and careful verification.

K02 Everyone has the ability to improve, and everything has room for improvement.

K03 always pursues efficiency improvement, and pays attention to methods and skills in everything.

K04 Communication from top to bottom requires * * * knowledge, and coordination from left to right requires progress.

K05 A careless person is very busy, everyone is very careful, and it goes smoothly.

K06 preventive maintenance can be done on time, and smooth production can't be wrong.

K07 instruments and equipment are frequently maintained, and the production is naturally smoother.

K08 eyes, hands, heart, bad nature can't run away.

K09 frontline workers, please note that quality and efficiency depend on you.

K 10 Pay more attention and ask less questions.

The products produced by K 1 1 have no quality, which is equivalent to making useless garbage.

K 12 Do a good job in product packaging to ensure the final quality of products.

K 13 Strengthen team building and improve work efficiency.

K 14 Everyone proposes innovation, and the cost is naturally reduced.

K 15 would rather check beforehand than rework afterwards.

K 16 old problem, to be cured; Pay attention to small problems.

K 17 Strive to do it well at one time and strive for the greatest benefit.

K 18 is an error-free expert, moving towards zero defects.

K 19 If you don't work hard today, try to find a job tomorrow.

K20 use electricity safely and save water; Fire fighting facilities, regular maintenance.

FIFO is the basis for observing the storage principle of K2 1.

K22 chemicals are dangerous, so be careful when storing and using them.

K23 Feed and discharge should be clearly remembered, and the management of several accounts should be more clear.

K24 cherishes materials and attaches importance to quality; Reasonable planning and clear identification.

◆ Slogan of production process control (Class P): P0 1 Control every working procedure and complete every product.

P02 Strengthen on-site process management and strictly control process factors.

P03 The first article inspection is not sloppy, and the process is stable and error-free.

P04 Report the problems in time and handle them in time.

P05 Think about improvement measures and make unremitting efforts.

P06 Zero defect production process, 100% quality products.

P07 More investment, better methods, and naturally higher performance.

P08 Keep the operating standards in mind, and you will be comfortable.

P09 It's no trouble to borrow your brain, and it's no effort to exert yourself.

P 10 you see, I use my brain, and it is difficult to increase production.

P 1 1 insist on education and training, and online operation can't be wrong.

P 12 It is better to act at once than to say a hundred empty words.

P 13 analyze the reasons carefully and solve the problem thoroughly.

P 14 old problems and small places are often fatal to varieties.

P 15 everyone checks the quality of work, and the quality of products is also checked layer by layer.

P 16 efforts to achieve QCC, the work will not be bitter.

P 17 process quality control point, product quality lifeline.

P 18 The next process is our customer.

Company slogan:

No.: TL0 1 The first lesson of management is to manage yourself first.

No: TL02 management is action, and management is setting an example.

No.: TL03 Manage people in advance and manage people with style.

No: TL04 adheres to first-class management, produces first-class products and provides first-class services.

Number: TL05 Correct Boot+Enforcement = Management

No.: TL06 What cannot be implemented+Who cannot be implemented = implemented.

No.: TL07 Good leader: guidance before work, supervision during work and counseling after work.

No.: TL08 Good employee: Think about business, do practical things, and know nothing.

No.: TL09 People who can't do small things can never do big things.

No.: TL 10 Only by doing things with your heart can you achieve great things.

No.: TL 1 1 Ideas determine ideas, and ideas determine the way out.

No.: TL 12 Find a solution to the problem, not an excuse to escape.

No.: TL 13 The work should be simplified, but not simplified.

No.: TL 14 Three elements of work: person in charge, time limit and result.

No.: TL 15. I can't see that the problem is the biggest problem.

No.: TL 16 If there are no problems, progress will stop and retrogression will begin.

No.: TL 17 The purpose of the meeting is to solve problems, not to repeat them.

No.: TL 18: discussion is required at the meeting; If we discuss it, we must decide; If you decide, do it; If it is done, it will be fruitful.

No.: TL 19 Strengthen communication and promote support and cooperation.

No.: TL20 Success and failure coexist, and competition and transcendence coexist.

No.: TL2 1 success = hard work+correct method+less empty talk.

No: TL22 Zero inventory, zero waste, zero defect, zero failure.

No.: TL23 smashing the rice bowl of an enterprise is smashing the rice bowl.

No.: TL24 How much water a barrel can hold is determined by the shortest wooden board.

No.: TL25 Only unexpected things, nothing impossible.

No.: TL26 First time right, first time right.

No.: TL27 Thought+Completion+Completion = 100.

Production slogan:

No.: TG0 1 Old problems, small places, often fatal quality injuries.

No.: TG02 Carefully analyze the reasons and solve the problem thoroughly.

No.: TG03 You see, I use my brain, and it is difficult to increase production.

No.: TG04 is worry-free when using brain, and effortless when using force.

No: TG05: More investment, better methods and higher performance.

No: TG06 controls every working procedure and completes every product.

No: TG07 strictly controls the production process to ensure that all products are qualified.

No: TG08 zero defect production process, 100% high quality products.

No.: TG09 process quality control point, product quality lifeline

No.: TG 10 The quality of work is guaranteed for everyone, and the quality of products is guaranteed at all levels.

No.: TG 1 1 Pursuing Excellence and enjoying perfect results.

No: TG 12 pursues the ultimate goal of seven zeros endlessly.

No.: TG 13. Put an end to all waste, pursue excellence and make continuous improvement.

No.: TT0 1 Eliminate unnecessary actions, and the action distance should be the shortest.

No.: TT02: Benefiting from action analysis, the limited resources are optimally allocated.

Code: TT03 IE's three principles: simplicity, specialization and standardization.

No.: TT04 Optimize the production operation process to maximize efficiency and benefit.

No.: TT05 promotes management by engineering method, and plans the project with management concept.

No.: TT06 is based on technology and cooperates with scientific management to find, solve and prevent problems.

No: TT07 IE is a scientific method to improve efficiency, cost and quality.

No: TT08 reduces costs and improves production quality and efficiency.

No.: TT09 Minimize the resources occupied by enterprise production.

No.: TT 10 Minimize the management and operation costs of enterprises.