How noisy is the heat exchange station? Distance will not affect the heating of your home.

45 decibels, the distance exceeds 10 meter.

Thermal power stations are divided into direct supply stations and intermittent supply stations according to the form of heating. For water-water heat exchange stations that need booster pumps or mixed pumps to heat water, the pumps should be set according to the analysis results of external network hydraulic conditions, and the hydraulic conditions of other users should not be affected. When there are two or more user systems, a distribution manifold or branch cylinder should be set. 、

When the heating medium is steam, the main steam pipeline in the station should be equipped with automatic cut-off valve and safety valve, and the steam inlet of each heat exchanger should be equipped with cut-off valve and regulating device.

Extended data:

Matters needing attention in the use of heat exchange station:

1. Before using the equipment, check whether the compression bolt is loose and whether the compression dimension A meets the dimension specified in the manual. Otherwise, tighten the bolts evenly to reach the specified size.

2. Before use, the equipment shall be subjected to water pressure test, and the cold and hot sides shall be tested separately. The test pressure shall be 1.25 times of the working pressure, and the holding time shall be 30 minutes. Only when there is no leakage in each sealing part can it be put into use.

3. When the equipment is used in food industry or pharmaceutical industry with high hygiene requirements, the equipment should be cleaned and disinfected before use, and the oil stains and sundries in the equipment should be disinfected.

4. When the working medium contains a lot of sediment or other sundries, a filtering device should be placed in front of the equipment.

Baidu encyclopedia-heat exchange station