How to store and manage aggregate sand and gravel at the mixing station site?

At the mixing station site, the aggregate pile usually covers an area of about 58m×50m, and at the same time, it is equipped with two loaders (the specific model is determined according to the actual needs) to pile up the aggregate and load it into the aggregate bin of the main mixer. The silo floor has an inward slope of 4%, and there is a 30cm×30cm drainage ditch outside the silo. The drainage ditch is provided with a reinforced water grate for the loader to pass through. The outer wall and partition wall of the silo are made of M7.5 mortar bricks, with a height of 1.2m and a thickness of not less than 37cm. There is a special additive pool of 2.6m× 1.5m× 1.5m, which is convenient for storage and management. A special pool of 2.6m×5m× 1.5m is set as the standby pool.

At the same time, the professional technical engineer of Great Wall Construction Machinery reminds everyone that in order to ensure the normal work of the mixing station, the aggregate must be sufficient, and a 250kw diesel generator should be reserved.