Detailed introduction of several common tile sticking technologies in decoration

There are many ways to lay tiles, and the tile materials on the market are also very complicated, and the processing methods of different tiles are also different. This way, which we usually call mosaic technology, is different from the technology. The effect is also different. By choosing, our owners and friends must follow the situation and real needs. The following small lamp will sort out several common bricklaying techniques for you, and you will see how the professional construction process can ensure the construction quality.

Introduction of bricklaying technology? The first process of sticking bricks is to chamfer the bricks.

The chamfer of the tile is the 45-degree tangent angle inside the tile. It is usually used for concrete columns, sewer pipes and window corners in kitchens and bathrooms. The thickness of the tile is usually 5 to 8 mm, and it is laid flat on both sides of the corner at a 90-degree angle to avoid seeing the side of the tile. It should be cut at a 45-degree angle, so that the appearance of the connected tiles is the front of the tiles, which is both beautiful and exquisite. The chamfering of tiles is the corner of tiles that we will find when placing tiles. The sides of tiles don't look very good after stacking, so we must cut the sides of tiles into 45 degrees and fight together. In fact, this process is tile chamfering, also known as fighting angle.

Tiling technology II. Brick wall and tile pressing

The process of tiling means that the tiles on the wall will press the tiles on the edge of the floor. There is a kind of covering that makes everything look more beautiful. There is no top space from top to bottom, and it has certain waterproof function. At present, most technologies are used to improve the waterproof function of bathroom tiles, which is a very good mosaic process.

Brick sticking technology three. Tile trough

Grooves are grooves of tiles, which is a way to cut long lines from tiles. In our daily life, we can also see hollow bricks. The tiles treated by this method have beautiful appearance, non-slip and accelerated water flow. At present, there are three main treatment methods: shallow hole stretching, deep hole horizontal stretching and vertical deep hole stretching.

Tiling technology IV. Tile pipe joint

Joint refers to filling the gap between two adjacent blocks with mortar. Its function is to make the connection between the upper, lower, left and right masonry materials safer and prevent wind and rain from invading the wall. Make the wall clean, tidy and beautiful. Therefore, it is also suitable for ceramic tile joints, mainly to maintain the appearance, cleanliness and impermeability (erosion) of floors and walls.

The process of sticking bricks. Tile spray mosaic

The technology of tiled water jet solid wood composite floor adopts ordinary ultra-high pressure technology, which pressurizes tap water to a pressure of 250-400 MPa, and then sprays water through a gem nozzle with a diameter of about 0. 1.5-0.35 mm. A high-speed jet with a speed of about 800- 1000 m/s is formed. That's enough. Abrasive is used to cut various raw materials, such as stones and metals, to make various patterns.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~