Summary of safety and environmental protection work

Summary of Safety and Environmental Protection Work in 221 (5 selected articles)

Time is passing by, and the work for a period of time has ended. Looking back on this period, our work ability and experience have increased, so we should do a good job summary. How should we write a work summary? The following is a summary of safety and environmental protection work in 221 (selected 5 articles) compiled by me for your reference only. Welcome to read it.

summary of safety and environmental protection work 1

Spring is full, and there are hundreds of battles! At the end of the spring, the concentrator ushered in the double-series start-up production, which is the moment for everyone to work together. Guided by the safety policy of "paying attention to health, controlling risks, continuous improvement and harmonious development", the concentrator strives to do a good job in safety and environmental protection to ensure the safe operation of double-series start-up production. Under the leadership of the factory leaders and the active cooperation of all employees, the safety and environmental protection work has been carried out smoothly this month, and achieved phased results, achieving the expected results of various indicators of safety and environmental protection. The work in May is summarized as follows:

1. Safety education and training

At the request of the company, combined with the actual situation of the concentrator, in order to do a good job in safety education and training for employees in the concentrator, improve their safety awareness, we actively carried out safety education and training, and achieved training results.

1. On May 8th, the concentrator organized safety education and training for on-the-job employees in two classes of ore crushing process. * * * There were 26 people attending this meeting, and the total training hours were 8 hours. The training contents include: explaining and analyzing the safety and environmental protection accidents and incidents that occurred in the concentrator this year, and examining and handling the accidents and incidents; You should know the application of knowledge.

2. Through this on-the-job employee safety education and training, the trained employees can fully understand the potential factors and conditions of safety and environmental protection accidents and incidents, improve their ability of hazard identification and self-protection, enhance their safety awareness, and learn how to avoid accidents and incidents and what protective measures to take. Learn to apply "what you should know and what you should know" knowledge to production. Do not hurt yourself, others, or be hurt by others. After training, employees have benefited a lot.

2. Safety inspection and hidden dangers rectification

1. In order to do a good job in safety production and eliminate the hidden dangers existing in the job site, the personnel, environment, equipment and management of the four working procedures and maintenance classes of the plant were inspected once, and 6 hidden dangers rectification projects were accumulated. Among them, there are 2 safety and environmental protection rectification items; 4 items of on-site management rectification.

2. The hidden danger rectification project is distributed to each working procedure (or team) in the form of hidden danger rectification notice, and each working procedure (or team) is required to carry out rectification as required. Acceptance of hidden dangers rectification projects, and truthfully recorded.

3. Kanban management

1. In order to strengthen the management of production posts, improve the consciousness of employees on the job, and ensure safe production, Kanban management was implemented for posts. After many audits and revisions, the template and content of Kanban for ore crushing and ball milling posts were finally approved this month, and the post safety inspection standards were determined, and the specific requirements of each standard were edited.

2. Kanban for two posts, ore crushing and ball milling, has been made and will be implemented in production posts soon. Employees in this post are required to operate according to the contents and requirements of the Kanban and be strict with themselves.

IV. Compilation work

1. Operation instruction series

Complete the compilation of "On-the-job instruction series" for 13 posts in the plant selection, and print and bind them into books, with 3 copies; Distribute the bound "Post Operation Guidance Series" to each management room, process (or team), and ask them to organize study, master the operation flow and content of this post and other posts skillfully, and carry out the operation as required.

2. The concentrator

stipulated to complete the compilation of plant selection management regulations (including 35 regulations on safety, environmental protection, occupational health, equipment and energy, technology, planning and scheduling, and comprehensive management), and printed and bound into a book, with 19 copies; Will be bound "concentrator management regulations" issued to the management room, process (or team), and asked to organize learning, in strict accordance with the safety, environmental protection and occupational health management regulations.

V. On-site safety skill implementation evaluation

1. To speed up the progress of "On-site safety skill implementation evaluation of concentrator" and deeply understand the safety skills and actual operation level of employees in concentrator, we conducted a spot check evaluation on 13 employees of two shifts * * * in the ore crushing process. Through the way of "question and answer", the contents of "handover", "operating rules", "safety rules", operating skills, national laws and regulations and enterprise rules and regulations are used as the basis for evaluation, and scores are given according to the situation.

2. Through the analysis of the results of spot checks and on-site communication in this month and last few months, employees can master the operating skills and procedures skillfully and define their post responsibilities, but they are still weak in safety awareness, national laws and regulations and enterprise rules and regulations, which need to be improved.

VI. Preparations for "Safety Month in June"

In order to welcome the arrival of the xx safety month in China and organize the safety month activities with the theme of "scientific development and safety development", the concentrator has made preparations for "Safety Month in June".

1. according to the company's requirements for June safety month activities, combined with the actual situation of concentrator, a series of activities that need to be carried out in June safety month are drawn up and distributed to various management offices, processes (or teams) in the form of schemes.

2. Ask the person in charge of the management room, process or (or team) to read the activity plan carefully, actively organize, participate in and plan various activities of Safety Month, so as to pave the way for the smooth development of Safety Month in June, and at the same time call on all employees to actively participate in this activity, so as to achieve the purpose and significance of Safety Month in June.

Work plan for July and June

1. Organize and carry out more than two factory-level safety inspections, and arrange the production team to be responsible for the rectification of the detected safety hazards, and require that every link of the rectification be truthfully recorded. When accepting the hidden dangers, the acceptance personnel must have the participation of personnel above the first level of the process, and make a slide show of the inspection and rectification, which will be announced at the safety production work meeting.

2. The production team is required to regularly organize the operators to systematically study the relevant provisions of the knowledge meeting and standardized management, and the specific contents of the learning process should be completely recorded in the record account of the class; Safety and environmental protection management personnel shall supervise and implement the work.

3. Strengthen the on-site management of each working procedure and maintenance class: do a good job in cleaning the internal and external environment of the factory building, equipment and facilities, on-site accounting, etc., so that there is no dirty and chaotic phenomenon on the site; All kinds of tools and materials shall be placed according to the requirements, without dislocation and confusion; Safety and environmental protection management personnel should follow up, check and implement the work.

4. Logistics personnel in the factory must wear labor protection articles strictly when entering and leaving the site. When not entering the job site, it is required to put labor protection articles in the designated place in a standardized and orderly manner. Arrange relevant personnel to supervise and implement.

5. Organize the staff above the team leader to hold a safety and environmental protection exchange meeting.

in June and June, the concentrator will plan to organize the whole factory staff, and * * * will review the cases of safety accidents that have occurred in the company in the past five years.

7. Organize personnel to watch the safety propaganda film organized by the company. Summary of safety and environmental protection work

In September, the workshop organized employees to implement the "Arrangement on Further Strengthening Work Safety" issued by the Security Department, and rectified and improved the problems found by Dongrui Company and Group Company in the comprehensive safety inspection and professional safety inspection before the two festivals; Improve the construction of safety culture in the workshop and strengthen the safety inspection. Severe punishment was imposed on violations. The problems raised by the internal audit were strictly corrected and revised.

1. Completed work

1. Further strengthen the work of safety in production: according to the spirit of thoroughly implementing the documents of the higher authorities and closely focusing on the safety policy of "safety first, prevention first and comprehensive treatment", the management level of safety in production in the workshop should be significantly improved, so as to ensure the realization of the goal of safety in production throughout the year and maintain the working goal of a good situation of safety in production in Dongrui Company.

the workshop organizes employees to study documents. Strict on-site safety management, strict investigation and punishment of illegal command, illegal operation, violation of labor discipline "three violations" behavior; Conduct regular production safety risk analysis and do a good job in accident early warning; Conduct regular safety inspections and do a good job in the investigation and management of hidden dangers; It is necessary to strictly implement the system of leading cadres; A series of activities such as autonomous safety team activities are widely carried out.

2. In view of the proposal put forward by the Environmental Protection Department, there are many people who do not wear safety helmets in the electrical professional field of the electrical instrument workshop, and there is a phenomenon of riding safety helmets. It was discovered by the Public Security Office that most bicycles entered the scene by employees in the electric instrument workshop had no pass plates. The workshop was rectified safely and the offenders were punished and educated.

3. The workshop should actively cooperate with our workshop in advance for the problems found in the comprehensive safety inspection of Dongrui Company before Mid-Autumn Festival and National Day; The workshop actively rectified the professional safety production inspection before the "two festivals".

4. Instrumentation:

(1) Alkali repair section This month, all the devices operated stably, and the granular alkali was stopped for maintenance in a planned way. The main safety work in the section was to find out the hidden dangers of all the devices and take corresponding measures to eliminate them. The workshop further eliminated all kinds of defects after overhaul, and took advantage of the shutdown of granular alkali to repair and clean up the 62% lye flowmeter, which has been put into use and runs well, ensuring the normal operation of granular alkali; In order to improve the quality of primary brine, a set of PH meter and ORP measuring device is added at the acid-base neutralization tank to better control the acid-base quantity.

this month, the workshop cooperated with the workshop to carry out centralized rectification on the 2XX work hazard analysis and safety factors to eliminate defects. The workshop organized and studied the "safety commitment", "safety production policy" and "safety production objectives" of the group company, and made corresponding training records.

At the workshop meeting, leaders once again emphasized the wearing situation of labor protection articles, and those who violate the rules will be severely punished.

(2) September is the quality month of the group company. Under the premise of ensuring safe production, the chlorine repair section should do a good job in daily maintenance and improve the maintenance quality.

conduct publicity training on the safety culture construction standards of the group company.

quality is the life of a product, and it is also the life of an enterprise. Our enterprise always strives for survival by quality and development by quality. The specific work in the workshop section is to improve the maintenance quality and keep improving the instrument maintenance.

safety culture is the unity of safety values, attitudes, ethics and codes of conduct enjoyed by employees in an enterprise, and the main body of enterprise safety culture is all employees. Therefore, the chlorine repair section requires the employees of the whole section to seriously study the safety culture construction standards of Binhua Group and apply them in practical work.

in the daily management, the workshop strictly pays attention to the labor discipline and labor protection, strictly implements the instrument maintenance procedures, and strictly follows the safety standardization. In the work of finding, reporting and eliminating hidden dangers, the instrument defects are actively found and reported to the workshop in a unified way to ensure the safe, stable and high-volume production of each device.

The workshop insists on organizing a regular meeting and safety drill in security team once a week, urging the team to manage hidden dangers, enhancing safety awareness and cultivating safety habits. The workshop always puts safety work in the first place, and takes safety as the starting point and foothold of other work. In September, there was no device reduction or shutdown due to instrument reasons. Successfully completed the monthly plans and tasks issued by the company and the workshop.

(3) Main work of industrial control section:

During the work in September, the industrial control section ensured the safe and stable operation of all control systems based on the principle of safety first. At the same time, the construction of flake caustic soda project was successfully completed, and the communication between flake caustic soda combustion furnace and DCS system was successfully carried out, ensuring the operation safety of the combustion furnace; In September, the wiring of DCS cabinet in the second phase of trichloroethylene project was carried out, the installation of DCS control system, the construction of system network and the configuration of the project were completed. At the same time, the security system has been cleaned up, so that it can better play a role in safety protection for the factory.

at the same time, the workshop organized employees to learn the safety production policy, safety production objectives and safety commitments of the group company, so that employees can clearly understand the importance of safety for an enterprise and effectively cooperate with the construction of enterprise safety culture of the group company.

in daily work, strengthen the management of labor insurance supplies, enhance employees' safety awareness, and earnestly achieve the goal of production safety and safe production.

5. Electrical aspects:

(1) Electrical repair section

The focus of work in September is to focus on the design and construction of flake caustic soda project, TCE phase II project and the transformation of VCM and PVC related equipment under the premise of ensuring the safe and stable operation of each device system. Eliminate the defects of PVC equipment that has been shut down for a long time. Respond to the company's safety management and safety standardization work spirit, and do all kinds of safety work well. There were no violations of discipline and discipline, and no adverse effects and consequences were caused.

the work of the electrical repair section has achieved remarkable results from several aspects.

1. The employees in the workshop are responsible for ensuring the safe and stable operation of each device system. Simple explanation, strict and realistic, serious and responsible, safety first.

2. Strengthen the inspection of key equipment.

closely observe the key equipment and important pumps in each block, especially the electrical equipment involved in technical transformation, and immediately find out the problems and deal with them.

3. Strengthen the search and elimination of equipment defects and hidden dangers.

improve the inspection quality, gain insight into the operation status of electrical equipment, find out the defects, hidden dangers and unsafe factors of the equipment, formulate solutions, and do a good job of eliminating defects in time.

4. Actively participate in project construction and technical transformation, and make suggestions for the company to expand production and optimize equipment operation.

5. Respond to the company's safety culture concept of safety management and safety standardization, do a good job of "two basics" in safety production, and strictly implement the "safety production policy and objectives" of the group company.

(2) Dongrui Company successfully completed the 2XX maintenance plan, and the electrical test section actively summed up the work experience, searched for deficiencies and defects, and actively made records to prepare for the 2XX maintenance project.

actively cooperate with the lightning protection testing center to inspect the key devices in key parts of Dongrui Company to prevent electrical damage to personnel and equipment. The background monitoring system of the general transformer can't detect the motor current data of the VCM workshop. The workshop actively searched and found that the CPU of the digital measurement and control device in the distribution room was damaged, and contacted the manufacturer for maintenance. During the maintenance period, allocate the standby CPU to ensure the normal operation of background monitoring. During the normal production and stable operation of the company, the workshop actively checks the vulnerable electrical components to ensure timely use in case of failure and damage. The main current and voltage transmitters and rectifier controller power boards are tested, and the defective devices are reported to the workshop and contacted with the manufacturers for deployment.

in September, the electric test section was in.