Always tripping. What's going on here?

In our daily life, due to improper use of electricity, it is easy to trip. However, if there is a problem of tripping all the time, we should pay attention to it, which may be caused by various reasons and need us to investigate one by one. Only by finding the reason can we solve the problem in time. Let's take a look at Bian Xiao's tripping problems and related solutions.

First, the reason for tripping all the time

If it always trips, it is necessary to analyze the reasons from various aspects, which may be caused by the following points.

1, check the air switch or leakage protector. If there is something wrong with the air switch or the leakage protector, it is easy to trip all the time, so we need to check it. If it still trips after replacement, the problem of air switch or leakage protector can be eliminated.

2. Check other electrical appliances at home again. Although it will be troublesome to check, it is possible that the root cause lies in some electrical appliances. For example, some electrical appliances have high power, or many high-power electrical appliances are used at the same time. For example, you can unplug the computer, induction cooker, microwave oven or electric water heater at home first, and then turn it on to see if it will trip again. If it still trips, it is not caused by leakage of household appliances.

It is necessary to check whether there is something wrong with the wiring at home. If the line has leakage or short circuit, it is also easy to cause tripping. If the load power of the conductor is relatively large and the installed conductor is unqualified, it is necessary to rearrange it at this time to solve the trip problem.

Second, how to prevent tripping

1, when using household appliances, be sure to pay attention to the load can not exceed the rated current, otherwise it will easily cause tripping. So when using, don't use high-power electrical appliances at the same time. Problems will arise when the load exceeds the normal range.

2, to reasonable wiring, when we choose wire specifications, we must also choose according to its load, never use overloaded wires, otherwise it will be easy to trip in the future. If the electricity consumption is relatively large, then choose high-power wires.