Safe operation process of automobile maintenance personnel

Implementing the safety regulations for automobile maintenance is an effective measure to prevent accidents in the process of automobile maintenance, so every mechanic is required to strictly abide by them. Then, do you know what the safety operation rules for auto mechanics are? The following are the safety operation procedures for auto mechanics that I have compiled for you, hoping to help you.

Safety operation rules for automobile mechanics 1. Before taking part in machine maintenance, mechanics must first receive professional technical training and obtain professional qualifications before they can engage in repair technical work.

2 technicians without motor vehicle driver's license shall not engage in the driving test after vehicle repair. ?

3, repair workers must wear work clothes to work, cuffs must be buckled, long hair to pressure in the hat, so as to avoid mechanical accidents.

4, should check whether the tools used are in good condition before work. During the construction process, tools must be placed neatly and must not be placed anywhere. After the work, the tools should be counted, checked and wiped clean, and put into the tool cart or toolbox as required.

5. After the vehicle enters the workshop, after the car is turned off and stopped, pad the wooden cover and support the jack and safety stool.

6. It is forbidden to enter the car to check the chassis or engage in disassembly operations when the engine is running.

7. When grinding the tool on the grinding wheel, don't take off the protective cover and tool rest to avoid the accident that the grinding wheel flies out and hurts people.

8. When disassembling and moving the battery, the electro-hydraulic liquid should be prevented from splashing on the skin or clothes, so as to prevent the sulfuric acid in the electro-hydraulic liquid from harming the skin and clothes. Regularly check whether the air holes on the battery cover are blocked, and the electro-hydraulic plane shall not exceed the regulations. Open the lid when charging to prevent the battery from exploding. When diluting sulfuric acid, be sure to inject water first, and then inject sulfuric acid bit by bit under the condition of stirring, so as to avoid danger caused by strong fever.

9. When the tire is inflated, it is forbidden to be near one side of the tire pressure ring, so as to avoid the pressure ring suddenly jumping out and hurting people.

10, each workshop should be equipped with fire-fighting equipment, and check it regularly to keep it in good condition and effective. All workers should be able to use fire fighting equipment.

1 1. The spilled oil must be spread out with sand immediately and cleared out of the workshop.

12. Check the automatic control valve of the air compressor every day. If the pipeline leaks, repair it immediately to avoid polluting the air in the workshop.

13. When disassembling and assembling parts, you must use appropriate tools or special tools, and you must not be reckless, and you must not directly beat the parts with a hard hammer. All parts shall be placed neatly after disassembly, and shall not be piled up anywhere.

14. Waste oil should be poured into the designated waste oil barrel for collection, and it is not allowed to flow back or into the drainage ditch anywhere to prevent waste oil pollution.

15. Pay attention to protect the gloss, decoration, seat and carpet of the automobile paint surface during maintenance, and keep the vehicle clean after maintenance. Smoking is not allowed in the workshop.

16. When using jack for chassis operation, a flat and solid site must be selected, the front and rear wheels should be plugged with angle wood, and then the vehicle should be firmly supported with safety stool according to the support points specified by the vehicle model. It is forbidden to simply jack up the vehicle and work under it.

17, in the process of repair, carefully check whether the original factory or replacement parts meet the technical requirements, and carefully operate, check and debug in strict accordance with the repair technical specifications.

18. Before starting the engine, check whether all components are assembled correctly, whether lubricating oil and cooling water are added according to regulations, put the transmission in neutral, and start the motor lightly for trial operation. It is forbidden to start the vehicle when there are people under it.

19, when the engine is overheated, don't open the water tank cover to avoid being scalded by boiling water.

20, the ground command vehicle driving, displacement, shall not stand in front of and behind the vehicle, and pay attention to the surrounding obstacles.

2 1, when cleaning parts, leaded gasoline shall not be used.

22. Don't clean the engine with gasoline. If you must use gasoline, you must unplug the battery cord first, and it is absolutely forbidden to clean it at startup.

23, automobile carburetor oil and pipeline damage, should be repaired in time, DC oil supply is prohibited to start.

24. The working lamp for repairing cars must be a 36V safe voltage, and high-voltage lamps are strictly prohibited. Turn off the power when you get off work.

25, lifting, disassembly, assembly should cooperate with each other, by a command, beware of mistakes, prevent slip, extrusion, collision, splash and burn.

26, the use of live equipment, machines and tools, electric drill, hand grinding wheel, hand, blowtorch to implement relevant operating procedures, do people withdraw electricity, fire. Oil drums, oil basins and oil tanks are all sealed.

27, carefully check whether the parts and assemblies meet the quality requirements, it is forbidden to use fake and shoddy parts.

28, the correct use of equipment and special tools, not hammering, not knocking, not illegal operation.

29, accessories, artifacts do not fall to the ground, the site is clean.

30, strictly control the dust, sand and gravel, to do a good job of sealing. The gasoline after cleaning the parts should be handled in time.

Automotive sheet metal drawing machine safety operation procedures 1. All kinds of hammers should be free of curling and scars, and the hammer handle should be free of cracks, and fastened with iron wedges. Quenching is strictly prohibited at the top.

2, are not allowed to shovel, chop, riveting, etc.

3. When cutting materials with scissors, hands are not allowed to stand on the cutting line. When using scissors, it is not allowed to hit the handle of scissors with a hammer.

4. Tap the sheets to prevent smashing and cutting your hands. Corner materials and chips should be placed in a safe place to prevent stabbing.

5, tin welding to remove water pollution, prevent splashing, welding oil and zinc chloride are not allowed to be misplaced, to clean up after use. When oxygen welding, the safety operation requirements of gas welder should be observed.

6, welding airtight container, first open the ventilation, and then welding. Welding containers filled with oil must be cleaned before welding.

7, copper, tin toxic welding site should be well ventilated.

Safety operation rules for baking paint workers. When entering the spray booth, you must prepare the required paint, natural water and necessary appliances.

2. Before the painting vehicle enters the painting room, all parts of the chassis fender should be wiped clean with dirt and dust. It is forbidden to remove dust in the painting room.

3. Wear clothes made of chemical fiber to prevent static electricity when painting.

4, it is forbidden to smoke in the paint room.

5. Don't open the door of the spray booth when working in it.

6. During the heat preservation and drying operation, the thermostat shall not be set at 80℃. Above C.

7. Clean the air inlet filter frequently to prevent clogging.