School safety inspection self-inspection report

School safety inspection self-examination report (general 5 articles)

The work has come to an end inadvertently. The work problems in the past period are worth summarizing to prepare for this period. Write a self-examination report on your work. I believe everyone is worried about writing a self-examination report again! The following are school safety inspection self-inspection reports (5 general articles) that I collected and compiled. They are for reference only. I hope it can help everyone.

School safety inspection self-inspection report 1

School safety is related to the safety of people’s lives and property, and to the harmony and stability of society. Recently, there have been frequent casualties among students in some schools, which have had a very bad impact on society, revealing that school safety education should be further strengthened.

The school has carefully studied the spirit of the Education Bureau's "Notice on Further Improving School Safety Work", carefully analyzed and studied the causes of accidents, learned lessons from them, and focused on building a safe Junan and creating a harmonious society. On one theme, in accordance with the requirements of the Education Bureau's safety work of "ten grasp and ten guarantees", we will carry out network-type safety inspections in an institutionalized and regular manner, so as to ensure that the alarm bells are always ringing and unremitting efforts are made. In order to effectively implement safety work and eliminate existing safety hazards, the following aspects of work were focused on during the self-examination:

1. The school leadership team immediately held a safety meeting to study and implement item by item. In the spirit of the Education Bureau's "Notice on Further Improving School Safety Work", we are determined to further increase safety efforts, focus on the big picture, start with small things, conduct inspections room by room, room by room, and wall by wall, and rectify problems immediately if they are found. Education and teaching create a good safe environment. The meeting made a decision:

1. The spirit of the "Notice" was immediately conveyed to all faculty and staff, the academic documents were implemented to promote the implementation, and safety responsibilities were clarified. In accordance with the items listed in the school's "Safety Checklist for Special Buildings for Classrooms and Offices" Conduct inspections item by item to ensure that there are no safety hazards in the area you are responsible for.

2. Each class will immediately hold a theme class meeting to provide students with a strengthened routine safety education. The class meeting requires that the content be substantial, the effect is significant, not just a formality, and truly play the role of safety education.

3. Start the safety drill plan, and the drill time is set at 9 o'clock on November 29.

2. Strengthen the management of students going up and down stairs

Accidents occur frequently when students go up and down stairs. This is directly related to the failure of management to keep up with preventive measures and unfavorable care and guidance. A rectification report is required. To this end, the school has taken the following measures:

1. A comprehensive overhaul of the stairs, handrails and other facilities was carried out to achieve a 100% integrity rate. Safety lines were set up on the stairs up and down the teaching building to make it clear to students. Ensure that corridors and stairs are unobstructed to prevent crowding.

2. The school signs a safety responsibility letter for going up and down the stairs with teachers and students. Teachers are arranged to be on duty at each stairway between classes and after school to protect and guide evacuated students. The requirements for teachers on duty are in place in a timely manner and their responsibilities are clear. Nip hidden dangers in the bud.

3. Manage the road team after school and strengthen traffic safety

1. Class activities outside the school must be reported to the school in writing, and going out without permission is strictly prohibited.

2. Safety warning signs have been set up. The road team after school is escorted by the head teacher and deputy head teacher. Agricultural vehicles, scrapped vehicles and other vehicles that do not comply with traffic safety are not allowed.

IV. Strengthen electricity and fire management

1. Strengthen electricity management and conduct standardized maintenance of power lines, especially switches, sockets, and connectors in classrooms. We have carried out key inspections and implemented the "one key and one pair of pliers" system to resolutely put an end to personal interference.

2. The fire protection system has been improved, fire protection plans have been established and improved, and educational activities with the theme of improving the self-protection, self-rescue, disaster prevention and escape abilities of primary and secondary school students have been carried out. Conducted instructive inspections on fire-fighting equipment and their use, and equipped them with fire-fighting equipment in accordance with fire-fighting requirements.

Fire hydrants and fire extinguishers in the teaching building have been inspected and updated, fire sources are strictly controlled, students are not allowed to carry fire with them, and the back door is not allowed to be closed during class to ensure that safe passages are unimpeded.

5. Strengthen campus security and prevent highly pathogenic avian influenza

1. Guards are on duty 24 hours a day and patrolling. Personnel not related to the school are not allowed to enter the campus, and arrangements are made for the entry and exit of outsiders. Registration, a cancellation system is implemented, students are taught not to interact with people they do not know, students are not allowed to leave the school without the signature of the class teacher, and students are strictly prohibited from bringing dangerous goods into the campus.

2. The school has formulated emergency preparedness for highly pathogenic avian influenza, carried out publicity and education activities on the prevention of highly pathogenic avian influenza to students, and educated students to develop good personal hygiene habits and not Close contact with poultry, and resolutely prevent livestock, poultry and products that have not been quarantined from entering the campus to ensure the health and safety of students' learning and living places.

After self-examination, safety hazards were eliminated, the school’s educational environment was improved, students’ safety awareness was further enhanced, and the whole school formed an organized and institutionalized safety education and teaching atmosphere. School safety inspection self-inspection report 2

xx school currently has more than 2,000 teachers and students, and 90% of the teachers and students have room and board at the school. With the gradual establishment of the "people-oriented" educational philosophy and the "service and education" management philosophy, doing a good job in safety and ensuring the health of teachers and students have become the top priority of the school. Our school adheres to the policy of "safety first, prevention first" and takes "finding hidden dangers and plugging loopholes" as the main content. It is based on prevention, strengthens supervision, implements responsibilities, and strengthens management. The school's safety work has achieved routine, standardization, and Institutionalized and scientific to ensure the safety and health of all teachers and students.

According to the arrangements of the County Education Bureau and the requirements of superior leaders, our school once again conducted a self-examination of school safety work. The report is as follows:

1. Traffic safety inspection situation:

In order to ensure traffic safety, the school often conducts traffic safety education for students, and conducts extensive publicity at regular teacher meetings and student gatherings , to improve the safety awareness of teachers and students. In order to strengthen students' self-rescue awareness and cultivate emergency response capabilities, the school has formulated various safety emergency measures. The school strictly implements laws, regulations and rules related to student safety education, strengthens guidance on school students' riding safety, establishes and improves corresponding student riding safety management systems, signs responsibility letters for pick-up and drop-off vehicles, and prohibits the use of transportation that does not comply with regulations. tool. Completely qualified upon inspection.

2. Food hygiene and food safety inspections:

The school has established a food hygiene and safety system, and employees have undergone strict physical examinations. Everyone has a health certificate, food, and tools. , environment, storage room, etc. to separate raw and cooked food, payment for goods, accommodation, etc., to avoid contamination and mildew. Keep the indoor and outdoor environment clean and tidy, and take measures to eliminate flies, rats, cockroaches and other harmful insects and their breeding conditions. There are corresponding facilities for disinfection, dressing, lighting, lighting, ventilation, anti-corrosion, dust-proof, fly-proof, rodent-proof, washing, sewage discharge, and storage of garbage and waste. From raw materials to finished products, the "four no's system" is implemented: no rotten raw materials are allowed to be prepared; no rotten and spoiled raw materials are left; no rotten and spoiled raw materials are used; and no rotten and spoiled food is purchased. Finished food storage implements "four separations": separation of raw and cooked products; separation of finished products and semi-finished products; separation of food and sundries and medicines; and separation of food and natural water. School cafeteria managers frequently conduct comprehensive inspections and registrations to ensure food hygiene and food safety.

3. Fire protection electricity safety inspection situation:

The school has established a leadership group headed by Principal Li Rucan, and its members include Vice Principals Jiang Lin, Dong Cuihua, Wan Changying, and Han Yongjun , Wang Baohua, and Liu Desheng, make full use of fire safety knowledge during weekly meetings. Frequently check power lines, electrical facilities, and safety passages to discover and solve problems in a timely manner. The lines have been updated and constructed by professionals and are in good condition.

4. School building safety inspection:

There are no dangerous rooms, dangerous walls, or dangerous toilets in the school. There are "Please keep to the right when going up and down stairs" signs on the stairs and safety warning signs.

The school prohibits students from climbing over walls, school gates, railings, and basketball hoops; it is prohibited for students to climb windowsills, chase and fight in corridors and stairwells; it is prohibited to close building doors during classes to block the flow of students; it is prohibited for students to play on rock edges and ledges. In the summer, students go to the river pond to take a cold bath alone without the guidance of an adult; they are prohibited from climbing or blocking cars on the road. Students are often taught to walk slowly when going up and downstairs, and to help their classmates in time when they fall to avoid being stepped on. We implement a noon duty system for teachers and supervisors on duty every week, and are responsible for the quiet lunch breaks of students and teachers at school and the safety of students. During assemblies, flag-raising ceremonies, and various activities, the head teacher and relevant personnel must arrive immediately upon hearing the signal to maintain order for students going downstairs, assist physical education teachers in team formation, and maintain discipline at the venue.

5. Experimental safety inspection:

The laboratory has "Laboratory Management Regulations" and has management measures for dangerous chemicals such as flammable, explosive, radioactive, and highly toxic chemicals. , implement dedicated management and standardized management, and teachers and students' experiments are conducted in strict accordance with the experimental operating procedures.

6. Safety inspections of on-campus and off-campus activities and social practice activities:

The school has conducted safety inspections on student activity venues, etc., and students have no off-campus activities. The equipment used in physical education classes meets the standards and is used in accordance with the regulations. There are full-time physical education teachers to supervise the safety of students at all times. Student activities are sports that are suitable for their age groups and beneficial to their health.

7. Health and safety inspection:

Clean the classroom every day, wipe tables and chairs, podiums, blackboards, doors, glass, corridors outside the classroom, railings, window sills, etc., clean and mop The classrooms and exterior corridor floors are cleaned every Thursday throughout the school. Responsible areas are cleaned three times a day to keep them clean. Schools often educate students on collective hygiene and personal hygiene and epidemic prevention knowledge. There is no self-organized student collective use of medicines and health care products.

8. Inspection of environmental management around the school:

The school attaches great importance to the management of the surrounding environment and there are no safety hazards. The school has strengthened the education on food hygiene and safety on campus. There are no residential buildings or canteens in the surrounding area, so there is no phenomenon of setting up stalls to sell food around the school. The school prohibits students from bringing knives, sticks and other sharp objects to public places for activities and physical education classes. The head teacher and teachers educate students to put knives back into their pencil cases in time after using them. There are no factors affecting students' physical and mental health near the school.

9. Safety management situation:

School leaders often organize teachers and staff to study superior safety documents, regulations, notices, etc., in order to enhance the safety work awareness of all teachers and staff and strengthen safety work leadership. The school has a safety management leadership group, duty records, guard system, guard registration system, and emergency plans and preventive measures for emergencies.

After receiving the document notification, our school leaders took it very seriously and immediately held a leadership team meeting. In accordance with the relevant requirements of the document, we immediately launched a safety self-inspection within the school. The main leaders of the school personally take charge, divide responsibilities and implement the tasks at every level. According to the inspection, the school did not have any safety hazards. We will continue to work hard to strengthen management, thoroughly implement the relevant spirit of our superiors, actively create a new situation in school health and safety work, and protect the physical and mental health of all teachers and students. School safety inspection self-inspection report 3

Comprehensively implement the spirit of superiors’ instructions on school safety work, strengthen school safety and stability work, ensure the school’s normal teaching order, and achieve “safety first, prevention first”, To create a safe school, in accordance with the spirit of the District Education Bureau's "Wujin District School Safety Production Inspection and Supervision Work Plan", our school has carefully and carefully inspected various safety work conditions. The self-inspection situation is now reported as follows:

1. Strengthen leadership and raise awareness

The school is the base for cultivating talents. The safety and stability of the school is related to thousands of households and the overall situation of reform, development and stability. First of all, the school established a safety work leading group headed by the principal, and organized a self-examination of school safety work in accordance with the spirit of the notice and instructions and the school safety inspection and assessment objectives.

(1) Formulate a "Safety Work Plan" and "Safety Work Emergency Plan";

(2) Formulate various safety systems to ensure that there are rules to follow and System services;

(3) Conducted in-depth and detailed inspections of school buildings and made records, and immediately repaired facilities that did not meet safety standards to ensure the smooth progress of education and teaching.

(4) The safety work of each room in the school (instrument room, computer room, multi-functional room, library, sports room, janitor, office of each grade) was carefully inspected, and any problems were immediately rectified solve.

2. Create a strong atmosphere of safe production environment

Use electronic screens, banners and slogans to display and promote safety production slogans and warnings; use the flag-raising ceremony to learn and explain safety systems and safety knowledge . Every corridor or stairway in the school is posted with the warning "Keep to the right when going up and down stairs, walk gently and be civilized" to remind students to be safe and civilized students; there are clear and standardized safety signs in the corridors. Through these methods, a strong atmosphere of safe production environment is created.

Use activity classes, subject penetration and other methods to carry out safety prevention education for students through explanations, demonstrations and training, so that students can receive more systematic education on preventing traffic accidents, preventing electric shock, preventing food poisoning, preventing diseases, Education on safety knowledge and skills such as sports injury prevention, fire prevention, theft prevention, earthquake prevention, and fraud prevention. We also use publicity tools such as school broadcasts, hanging banners, and posting slogans, and hold theme class meetings, lectures, knowledge competitions, etc. to carry out colorful safety education. The school actively promotes a weekly safety reminder. The school uses the pre-week meeting and Monday flag-raising activity time to summarize the safety work of the previous week and emphasize safety matters.

3. Safety education, always focus on it

1. The school uses school meetings and Young Pioneers theme meetings to conduct a series of safety education for students, and uses cases to discuss both positive and negative aspects. Education to improve students’ self-protection and self-rescue abilities. We also organized laws and regulations on school safety for teachers and students, established the idea of ??"education first, prevention first", extensively carried out legal and safety education, and included safety and legal education as an integral part of quality education and included it in the school education and teaching plan. , implement safety and legal education into publicity positions such as broadcasts and windows, publish regular columns, and penetrate safety education into class education, course teaching and student activities through various channels to ensure that students receive education to 100%.

2. Integrate safety knowledge education into the teaching of various subjects, so that safety education content can truly enter the classroom. In conducting safety education activities for students, we must also pay special attention to strengthening education on students' network security, preventing juvenile crimes, and strengthening minors' self-protection. When organizing students to participate in group activities, safety education, organizational discipline education, and preventive protection must be carried out. Emphasis was placed on safety awareness education in physical education classes.

4. School Hygiene

The school has clear divisions into each responsibility area, and students can usually be organized to do a big sweep a week and a small sweep every day. The school cafeteria has a health license, the staff has participated in employee health training and has complete health certificates. Strictly follow the requirements of the health department to handle certificate request, verification, inspection and testing. Do not allow Sanwu products to enter the campus to ensure students’ dietary safety. Strictly do a good job in disinfecting tableware and retaining food samples. The school has formulated emergency plans for major accidents, food poisoning, infectious diseases, etc. The medical office is managed by dedicated personnel and keeps good health records such as disease registration and epidemic reporting. Carry out health experience for new students and vaccinations for students. Carry out prevention, disinfection and publicity work in a timely manner according to the sudden epidemic situation.

5. Strengthen legal education and create a harmonious campus

In order to strengthen students' legal concepts, enhance their awareness of learning, understanding and abiding by the law, guide them to correctly establish legal concepts, and enhance students' self-security Awareness and protection level, consciously abide by laws and regulations, promote students' development of good civilized habits, and become a student with standardized words and deeds. Our school invited police officer Shao, the school's vice principal of legal affairs, and Peng Hao, a police officer from Hutang Police Station, to come to the school to give legal education lectures to students in grades 3-6.

With rich knowledge, detailed information, and humorous language, combined with the current social security situation and the current reality of weak legal awareness among students, it explains in a simple and in-depth manner through vivid cases that happen around teenagers and inside and outside the campus. It clarifies the causes and characteristics of juvenile crime, clearly points out what behaviors should be prohibited for young students, and guides students on how to prevent and reduce crime, how to learn to protect themselves, and how to prevent and reduce crime from the aspects of establishing lofty ideals, correct legal concepts, and treating the Internet correctly. The students received a lively legal education class.

6. Campus Surrounding Environment

The "School Ahead" warning sign on the road in front of the school has been covered by trees. There is a lack of deceleration traffic facilities. The speed of passing vehicles is high. There are many obstacles during school hours for students to go to and from school. Certain safety hazards.

This event was well organized and acted upon, and achieved very good results. In the future work, we must maintain the results achieved this time, strive to create a "safe campus", and strive to create a "life-caring" social atmosphere and a safe environment for the development of education. School safety inspection self-inspection report 4

In order to strengthen laboratory safety management, do a good job in laboratory safety protection, eliminate safety hazards, effectively prevent and resolutely curb the occurrence of various laboratory safety accidents, and effectively maintain experimental teaching The physical and mental health of teachers and students in the process. Our county has carried out serious self-examination according to the spirit of relevant documents from superiors. The self-inspection situation is as follows:

1. Leaders attach great importance to strengthening laboratory management and construction

In order to comprehensively strengthen For experimental work, the school has strengthened the management of the laboratory. The principal is the first person responsible, and the vice principal in charge of teaching and the director are specifically responsible. The management of laboratory work has become scientific, standardized, high-level, and created new characteristics.

2. Management system

1. Laboratory management system: "Laboratory Management Leading Group", "Laboratory Rules", "Laboratory Safety Management System", "Experimental Teachers" Responsibilities", "Lending and Returning System", "Damage Compensation System", "Repair and Maintenance System", "Loss Reporting System", "Laboratory Safety Emergency Response Plan", "Safety Inspection Record Form", etc. are complete. The school provides safety education to students before starting experiments every semester. Materials related to student safety education should be stored in the laboratory. Including "Instrument Room Rules", "Instrument Room Safety Management System", "Damage Compensation System", "Student Experiment Code", "Chemical Laboratory Dangerous Goods Use System", "Emergency Measures for General Injury in the Laboratory", etc.

2. Account management: "Teaching Equipment General Ledger", "Teaching Equipment Detailed Account", "Teaching Equipment Borrowing and Return Registration Form", "Teaching Equipment Damage Compensation Registration Book", the names and quantities are consistent. The accounts, items, and cards are consistent and the records are complete.

3. Laboratory basic equipment

1. Signs: The instrument room (including the laboratory) must have signs. The signs must be standardized, neat and generous, and the size, height, and The location is consistent.

2. Placement of instrument cabinets: The instrument cabinets are placed against the wall, with a certain gap to avoid moisture deformation. Instrument cabinets are classified. Instrument cabinets of matching height, size, and color are placed together in rows horizontally and vertically, arranged uniformly, and neatly.

3. Numbering of instrument cabinets: Instrument cabinets should be numbered in order. The shape, size and color of the cabinet number plate should be consistent, beautiful and elegant, and the handwriting should be standardized. The cabinet number plate should be placed on each instrument The top front of the cabinet is in the middle of the edge.

4. Instrument placement: The quantity, specifications and internal layout should be designed according to the actual situation. Strengthen the load-bearing capacity of the shelves for heavier instruments. Equipment is stored neatly and orderly.

5. The instrument room should hang "Instrument Room Rules" and "Instrument Room Safety Management System". The hanging position should be appropriate, the height should be moderate, and the vertical direction should be standardized. The "Teaching Instrument Storage List" contains the name of the instrument, specifications and models, existing quantity, storage location, etc. The font should be neat, standardized and beautiful.

6. The instrument room must be dust-proof. No other debris is allowed to be piled indoors, and a dedicated room must be used exclusively.

Open doors and windows frequently for ventilation, and keep indoor instruments, window sills, floors, walls, cupboards, tables, shelves and hanging objects clean and free of dirt.

7. Curtains must be hung in the instrument room, and the instrument room and hazardous chemical room (storage) are equipped with anti-theft facilities.

4. Drug Safety

1. Set up independent hazardous chemical cabinets. Hazardous chemical cabinets are divided into at least four independent compartments, and there is no communication between each compartment. Each compartment must have an exhaust device to exhaust air regularly.

2. The medicine room has anti-theft, fire prevention, moisture-proof, anti-corrosion, ventilation and other measures.

3. Hazardous chemical cabinets are managed by two persons and double locks.

4. Stored hazardous chemicals should be inspected regularly and inspection records should be kept. Increase the intensity of inspections in special seasons such as hot summer and cold winter to prevent accidents such as combustion, explosion, volatilization, and leakage. Inspection contents: Whether the account items match; whether there is any mixing; whether the packaging is damaged, whether the seal is tight, whether the amount of stabilizer meets the requirements; whether the label falls off, whether the reagent deteriorates; the temperature, humidity, ventilation, shading, and fire extinguishing of the storage place Check the equipment condition and resolve any problems immediately.

5. Requirements for safe storage of hazardous chemicals:

(1) Classified storage according to different types of drugs. Dangerous drugs are classified and stored in isolation, and iron cabinets should be set up to store dangerous drugs of different properties separately. For corrosive items, corrosion-resistant materials should be used as shelves. Store bottles of explosive materials in a cabinet covered with dry yellow sand. Dangerous goods that can cause combustion and explosion when in contact with each other and with different fire extinguishing methods should be stored separately and cannot be stored together.

(2) The dangerous drugs storage room is dry and well ventilated. Doors and windows should be sturdy and doors should open outwards. Stay away from study, work and living places, and away from water sources. The storage temperature of flammable liquids generally does not exceed 28°C, and the storage temperature of explosives does not exceed 30°C. There are no warning signs at the door of the storage room.

(3) Dangerous chemicals should be stored away from fire sources, with visible signs set up, and measures should be taken to prevent theft, ventilation, sun protection, fire protection, explosion-proof, moisture-proof, lightning protection, anti-static, anti-corrosion, anti-leakage, etc. Measures include fire extinguishers, curtains, hygrometers, ventilation and other equipment; lighting equipment is isolated, enclosed, and explosion-proof.

(4) When storing drugs in the hazardous chemical room, flammable products should be kept away from explosives and oxidants, poisonous products should be kept away from acidic corrosive products, and acidic corrosives should be kept away from alkaline corrosives. In the hazardous chemical cabinet, the order from top to bottom is flammable products, alkaline corrosives, poisons, oxidants, and acidic corrosives.

(5) Strictly control the procurement, warehousing, use, recycling, and scrapping of hazardous chemicals, and implement a system of double custody, double use, and hazardous chemicals entry and exit registration to ensure that the accounts are consistent .

5. Fire safety

1. Fire infrastructure:

(1) Fire extinguishers and other fire-fighting equipment are equipped as standard and can be used normally;

(2) The laboratory fire passage is smooth, and fire evacuation signs are set as required;

(3) The passage wires and lines are reasonably laid out, the voltage is stable, and equipped with leakage protection devices;

(4) The emergency lighting is in normal working condition.

2. The laboratory must meet the requirements of the design specifications, with smooth water pipes and reasonable water pressure; hidden wire laying, effective grounding, standardized circuit layout, and safe load matching; equipped with leakage protection devices, and laboratory teachers Can control the power supply of student experimental bench. The laboratory is equipped with fire extinguishers, fire buckets, and sandboxes. The chemical first aid kit should be placed in a convenient and conspicuous place in the chemical laboratory.

4. Waste liquid, waste gas, and waste residue cannot be discharged directly and must be processed in a centralized manner in accordance with national standards.

6. Rectification situation:

1. Improve the requirements for managers, strengthen the education of managers’ sense of responsibility, require them to work hard, be strict with their duties, and consciously abide by relevant laws, regulations and Learn various rules and regulations and master the management knowledge of chemicals.

2. The laboratory and instruments must strengthen the four precautions (fire prevention, theft prevention, waterproofing, and accident prevention) to prevent experimental accidents.

3. When non-laboratory workers come to the laboratory, laboratory staff must be present.

4. A comprehensive inspection of relevant instruments and equipment must be carried out before the start of the experimental class. Experimental personnel are not allowed to leave the site while the instruments and equipment are in operation.

5. Experimental staff must be very familiar with the performance and operating procedures of experimental instruments and equipment, strictly implement experimental operating procedures, and take necessary safety precautions.

6. Smoking and eating food are not allowed in the laboratory.

7. Inflammable and explosive items that have nothing to do with the laboratory are not allowed to be brought into the laboratory at will.

8. Before leaving get off work, laboratory personnel must check the operating instruments and the doors and windows of the entire laboratory as well as unused water and electricity, and ensure that they are closed properly.

Our county has done some work in the construction and safety management of laboratories. But we deeply realize that with the development of the times, laboratory construction and safety management is a meticulous, long-term and arduous task. There will definitely be shortcomings, and we will work hard to continuously achieve new breakthroughs in laboratory work. School safety inspection self-inspection report 5

1. Implementation of the safety work responsibility system.

Strengthen leadership and establish and improve safety leadership and working institutions. The school has established a safety work leadership group. The members of the group strengthen self-examination and self-management, clarify the division of labor, implement responsibilities, firmly establish a game of chess mentality, and are responsible for safety work within the scope of responsibility according to their respective divisions of labor; strengthen the sense of responsibility and mission for safety work, Various management systems have been established and improved, such as the "Safety Education System", "School Building and Financial Safety Management System", "Fire Safety Management System", "School Safety Work Report System" and other safety management systems. Managers enable specific actors to operate within the scope allowed by the system, require dedicated personnel to control areas with potential safety hazards, and do preventive work. We must implement strict management, strengthen supervision, and resolutely prevent the occurrence of accidents that endanger the lives and property safety of teachers and students. The Political and Education Department and the leaders on duty carefully keep records of daily work, such as safety patrol records, fire safety records, guest registration sheets, duty records, etc., and save first-hand information; the education administration department and the school, the main leaders and supervisors of the school Leaders, leaders in charge and department heads, department heads and directly responsible persons have signed safety work target responsibility letters at all levels, and the principles of "whoever is in charge, who is responsible" and "whoever sponsors it, who is responsible" are implemented, and each level is grasped. , implemented at all levels, each department and branch office managed its own people and property, and formed a "four-level safety work management system", which clarified the division of responsibilities, strengthened supervision and management, clarified responsibilities, and checked at all levels.

2. Safety education for students.

Since the beginning of the school year, the school has attached great importance to students’ safety education and self-rescue and self-protection knowledge training, so that every student can master certain safety, self-rescue and self-protection knowledge; in daily teaching work, make full use of the blackboard posters , class teacher theme class meetings and other forms to effectively educate students on safety knowledge; the school has also formulated relevant systems to ensure the implementation of student safety work. The principal and the class teacher sign a safety target responsibility letter, and the class teacher signs a safety target responsibility letter with the students and their parents. The school has close contact with the society, and the class teacher and parents work closely together to ensure the safety of each student. In addition, the class teacher holds a safety education class every week, with teaching materials, plans, lesson preparation, and homework.

3. Strengthen the management of the environment around the school.

In order to further improve the school security system and ensure school security, we have strengthened the police-civilian cooperation with the town police station so that there are no game rooms or billiards within 200 meters of the school. Room, Internet cafe.

4. Safety inspections

1. Safety inspections on electricity use

Mainly for dormitories, classrooms, libraries, laboratories, and campuses in the school Check all electrical facilities to see if there are exposed wires or unauthorized connections; whether each distribution box is locked; and whether the power supply is intact. After inspection, it was found that the electrical facilities were safe and normal.

2. Conduct safety inspections on school buildings and living facilities

During the facility safety inspection process, conduct a careful and detailed inspection of school buildings to check whether there are dangerous walls and Other safety hazards and other phenomena exist. At the same time, various facilities are inspected regularly to prevent safety accidents.

3. Safety inspection of fire-fighting facilities

In order to strengthen the school’s fire-fighting work and the management of fire-fighting equipment, and protect the safety of public property and the lives and property of teachers and students, the school implements Under the policy of “prevention first, combined with prevention”, regular inspections of fire-fighting equipment are carried out to prevent the occurrence of safety accidents. Inspection results: Fire extinguishers in laboratories and teaching buildings are normal.

4. Strengthen the inspection of anti-theft facilities

In order to ensure the safety of our school’s property, we have strengthened the inspection of anti-theft facilities during the security inspection. Through the inspection, no security measures were found. Hidden danger.

5. Strengthen the gatekeeper registration system and duty system

Visitors to the school must register before entering the school. A 24-hour duty system is implemented: the doormen take turns to be on duty 24 hours a day; the leader leads the shift, and each office is equipped with officers on duty, and duty records are written. ;