Minutes of the Company's Safety Production Meeting (II)

Meeting place: * * Conference room on the second floor.

Participants:

Recorder: * * * *

Absence meeting:

In order to do a good job in the company's safety production, a safety production training meeting of * * * * Co., Ltd. was held in the conference room on the second floor of the base on the afternoon of September 13. All employees of the Ministry of Safety attended the safety production training meeting. This training will be presided over by Zhang Kuo, deputy manager.

First of all, * * * reviewed the company's achievements in safety production in August, and achieved good results without accidents in August. To this end, the company verbally praised the safety production department, and expected all employees of the safety production department to make persistent efforts to achieve such results in September, adding another brilliant stroke to the company's safety production. However, achievements are the past and do not represent the future. Therefore, we should tighten the string of safety, continue to strengthen the supervision and inspection of the company's safety production, and continue to work hard to achieve such good results in September. In order to continue to strengthen the safety awareness of employees of the Ministry of Security, special training was conducted. The training materials are as follows:

1, safety clause

(1) Safe production: eliminate or control the dangerous factors in the production process to ensure the smooth production.

(2) Intrinsic safety: By means of design, the production equipment or production system has its own characteristics.

Safety, even in the case of misoperation or failure, will not cause accidents.

(3) Safety management: it is a series of legal measures to protect workers' safety and health, improve working conditions, prevent industrial accidents and occupational hazards, realize the combination of work and rest, strengthen safety production, and enable workers to carry out production safely and smoothly.

(4) Accidents: The general term for emergencies that occur in the course of professional activities, which usually interrupt normal activities and cause casualties or property losses.

(5) Accident hidden danger: the dangerous state of the things that caused the accident, the unsafe behavior of people and the treatment defects.

(6) Unsafe behaviors: employees violate disciplines, operating rules and methods and other dangerous behaviors in professional activities.

(7) Illegal command: the act of forcing employees to work in violation of national laws, regulations, rules and regulations or operating procedures.

(8) Illegal operation: employees do not abide by rules and regulations and take risks in their operations.

(9) The principle of "four no-misses" refers to the principle that when investigating and handling industrial accidents, we must adhere to the principle of unclear analysis of the causes of accidents, failure to take practical preventive measures, failure to punish those responsible for accidents, and failure to educate employees.

(10) Three violations: illegal command, illegal operation and violation of discipline.

(1 1) Three-level safety education: factory education, workshop education and team education.

(12) Four Don't hurt: Don't hurt yourself, don't hurt others, don't be hurt by others, and help others not to be hurt.

(13) understand three things and four things: understand the production principle, technological process and equipment structure; Able to operate, maintain, troubleshoot and handle accidents, and correctly use elimination equipment and prevention.

protective equipment

Four musts for safe production:

1. Everyone must pay attention to safety: not only their own safety, but also the safety of others and other potential safety hazards.

2. Be sure to pay attention to safety in everything: pay attention to safety in everything, and don't ignore safety because of proficiency.

3. Always pay attention to safety: speed up because of the upcoming work, manipulate illegally and ignore safety.

Be sure to pay attention to safety everywhere: pay attention to safety everywhere

(14) Occupational safety: refers to the state that no casualties, occupational diseases, equipment damage or property loss occur in the production process, which is a kind of safety with specific meaning and scope.

(15) Danger: refers to the existence or latent state that can lead to accidents.

(16) Hazardous chemicals: refer to chemicals that are flammable, explosive, toxic, harmful and corrosive, and will cause harm or damage to employees, facilities and the environment, including explosives, compressed gas and liquefied gas, flammable liquids, flammable solids, natural articles and flammable materials when wet, oxidants and organic oxides, drugs and corrosive products.

(17) Major hazards: refers to the long-term or temporary unsafe state of production, processing, handling, use or storage, unsafe behavior of people, defects in working environment and defects in treatment.

2. Safety colors and safety signs

China stipulates that red, blue, yellow and green are safe colors. Its meaning: red: forbidden, stop.

Blue: indicates the rules that must be followed.

Yellow: warning, attention

Green: indicates safe passage.

Illegal operation: Any violation of various laws and regulations issued by the state in the production process, and various rules and regulations formulated by enterprises and institutions and their superior governance organs that reflect the objective laws of production safety, including procedures, rules, articles of association, provisions, methods and delivery of technology, production operation, labor protection and safety governance, as well as notices and decisions related to production safety, are illegal operations.

The main information is summarized as follows:

1. Don't wear and use all kinds of labor protection articles correctly according to regulations, and wear slippers, sandals, high heels, skirts, bell bottoms, scarves, girdles, braids, topless and backless, etc. In the production process.

2, irresponsible work, AWOL, string posts, drinking, doing private affairs during working hours, engaged in activities unrelated to their jobs.

3, found that the equipment or safety protection device is defective, not to reflect to the leadership, continue to manipulate, unauthorized removal of safety protection devices and abandoned.

4. Ignore safety and warnings, venture into dangerous areas and places, climb or sit in unsafe positions.

5. Do not operate the equipment according to the operating rules and process requirements, operate the equipment by hand instead of tools without authorization, replace hand tools by hand, remove chips by hand, fix the equipment without fixture, and process the workpiece by hand.

6 without acceptance, transfer or storage, unauthorized use of equipment and vehicles.

Unauthorized use of equipment and vehicles operated by non-leaders

7. Refueling, repairing, inspecting, adjusting, blanking, welding, cleaning and troubleshooting the machine without authorization.

8. Failing to clean up the job site in time as required, dumping the removed wastes and garbage at the specified place, and placing the workpieces and accessories at will, blocking the passage.

9. Use all kinds of lifting equipment, facilities and tools that have lost their rated load potential or do not meet the safety requirements.

10. Failing to implement the safety measures specified in the Application Form for Dangerous Operation, blindly obeying the illegal command of the leader and not resisting.

1 1. Failing to store, transport, send and receive inflammable, explosive and highly toxic substances according to regulations.

12, special operations without a license, motor vehicle driving alone with a student ID card and driving without a license. Special equipment and key parts are not carefully registered and handed over, leaving their posts or sleeping without authorization.

13, safety is not emphasized in economic contracting, and equipment and physical strength are desperate for time, speed and risk, or equipment is not operated according to process requirements, which makes the equipment overload.

Safety meeting minutes (2):

Meeting time: ××× year × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × month × day × month × day × month × month × month × day × month × month × month × month × month × month × month × month × day × month × month × month × month × month × month × month × month

Meeting place: conference room on the third floor of the company.

Moderator: ×××

Participants: company leaders, heads of departments and project departments.

Meeting minutes:

The meeting was chaired by * * *. According to the spirit of the regular meeting of cadres held by the general manager and some phenomena found in the recent supervision and inspection work, new arrangements have been made for the next step.

1, safety supervision and inspection. From once a month to twice a month, the main participants, safety officers and principals give rectification instructions according to the inspection situation; Hold regular safety meetings at the end of each month to report the recent safety work.

2. Safety inspection system. On-site inspectors, safety officers, management personnel, etc. All parts shall be inspected and registered according to the system. The frequency of inspection is low, and those who do not follow the system will be punished according to relevant regulations; The rolling mill added a record book to the thin oil station, and the personnel checked and registered properly.

3. Factory vehicle management. At present, our company has many vehicles, such as forklifts, transport vehicles, forklifts, excavators, commercial vehicles and so on. Therefore, it is necessary to strengthen the supervision and management of on-site personnel, especially construction vehicles. If there is any violation of regulations on the construction site, it must be stopped or notified to the security department for handling.

4. Pre-job training for safety leaders and special operators should be set up in different regions. Special steel and high-speed wire rod will be put into production soon, and it is necessary to set up part-time safety leaders in various regions at this moment; The safety operation procedures of each post should be compiled into a book, and employees should be trained in a targeted manner.

5, homework ticket use. At present, there are many aerial work, hot work and confined space work, but the use of individual work tickets is not in place. People at all levels sign the working ticket, which also informs you to check its preventive measures and arrange personnel to check and assist, and also reflects the importance attached to safety. If the next inspection finds that the operation ticket has not been handled, it will be punished according to the regulations, and if the illegal operation is found, the punishment will be doubled.

6. Safety signs on the project wall. At present, the high-speed wire has been partially completed, so it should be used as soon as possible after completion, especially in gas stations, power distribution rooms, operation desks and other parts, and it should be tested immediately to serve as a warning to operators and outsiders; Some special steel safety signs should be made after collection; The marking of new factory buildings must be carried out in accordance with the laws and regulations promulgated by the state.

7. Smoking is strictly prohibited. At this moment, personnel have been arranged to inspect every day and make unannounced visits at night. If anyone is found smoking at the scene, it will be handled according to the regulations. No matter what the situation is, everyone should be informed in place, including our employees and foreign construction teams.

8, lightning protection self-inspection. Each factory uses the button table to conduct self-inspection on the grounding of gas station and power distribution room to see whether the grounding meets the requirements; At present, in order to reduce the damage of lightning and static electricity to electrical appliances or lines, some units have installed surge devices in dangerous parts such as gas stations to prevent damage. Let's see if we should install them.

9. Summer is coming, so we should do a good job in heatstroke prevention and gutter cleaning. Measures such as increasing part of cooling water for employees; Some equipment should be checked; The driving temperature is high, so it is necessary to check and maintain the air conditioner and urge the new driving air conditioner on the project. Before the rainy season comes, it is necessary to clean the gutter and the sink on the top of the workshop, repair the damaged downspout, and prevent rainwater from recharging or getting wet. The low-lying temporary lines of the construction team of this project should be cleaned up to prevent accidents.

10, traffic safety. Some new employees have entered the project one after another, emphasizing good traffic safety. At the same time, we should make a good receipt at this moment, so that they can form good habits from the beginning.

;