3 Regulations on the Use and Management of Safety Signs

The management regulations on the use of safety signs play the role of regulating the use of company safety signs, reminding employees to pay attention to safety, and reducing the occurrence of accidents. The following is a sample safety sign management regulation, please refer to it.

Management regulations on the use of safety signs 1

1. The height of the signboard

The height of the signboard should be as consistent as possible with the height of the human eye. . The height of the lower edge of hanging and column-type environmental information signs from the ground should not be less than 2m; the height of local information signs should be determined based on specific circumstances.

2. Requirements for the use of safety signs

1. The sign should be placed in a conspicuous place related to safety, so that everyone has enough time to pay attention to it after seeing it. Represented content

. Environmental information signs should be placed at the entrance of relevant places and in conspicuous places; local information signs should be placed in conspicuous places near the corresponding hazardous locations involved or equipment (components).

2. Signs should not be placed on movable objects such as doors, windows, shelves, etc., so as to prevent the safety signs from being visible when these objects are moved. No obstacles may be placed in front of the sign to hinder its reading.

3. The angle between the plane of the sign and the line of sight should be close to 90°. When the observer is at the maximum viewing distance, the minimum angle should not be less than 75°.

4. Signs should be placed in a bright environment.

5. When multiple signs are installed together, they should be arranged in the order of warning, prohibition, instruction, and prompt type, first left then right, first up then down.

6. There are three ways to fix signs: attached, hanging and column. Suspended and attached fixations should be stable and not tilted, and column signs and brackets should be firmly connected together.

7. Other requirements should comply with the provisions of GB 15566.

3. Inspection and maintenance

Safety signs should be inspected at least once every six months. If any damage, deformation, fading, etc. are found that do not meet the requirements, they should be repaired or replaced in time.

Regulations on the use of safety signs 2

Regulations on the use of safety signs

In order to standardize the setting of safety signs and ensure safety in the production process, in order to conscientiously implement safety sign standards , strengthen the procurement, use, maintenance and management of signs, and give full play to the warning role of safety signs, these regulations are specially formulated.

This regulation applies to the management of safety signs in production, living and office spaces at the company's construction site.

1. The meaning and concept of safety warning signs

1. Safety warning signs include: safety colors and safety signs.

2. Safety colors refer to colors that convey safety information, including red, blue, yellow and green.

(1) Red: means prohibition, stop, danger, etc.;

(2) Blue: means instructions, regulations that require people to comply;

(3) Yellow: It means to remind people to pay attention. All devices, equipment and environments that warn people to pay attention should be shown in yellow;

(4) Green: It means to provide people with permissible and safe information.

3. Contrast color is a contrasting color that makes the safety color more eye-catching, including black and white.

4. Classification of safety signs: prohibition signs, warning signs, instruction signs and prompt signs.

(1) The basic form of a prohibition sign is a circular frame with a slash;

(2) The basic form of a warning sign is an equilateral triangle frame;

( 3) The basic type of instruction mark is a circular frame;

(4) The basic type of prompt mark is a square frame.

2. Responsibilities of each department

1. The company’s security and safety department is responsible for supervising and inspecting the use of safety signs.

2. The security department of the grassroots unit is responsible for the procurement, distribution, storage, use and management of safety signs.

3. The project management department is responsible for providing plans and daily management of the use of safety signs.

4. The construction site safety officer shall hang safety warning signs on the corresponding parts with dangerous factors and be responsible for supervision.

3. Work requirements

1. The security department of the grassroots unit should propose a usage plan based on the construction site needs of each project management department, and purchase it after approval by the unit's production manager. The purchased safety signs must comply with the requirements of the national standard "Safety Signs" (GB2894-1996).

2. Safety signs at the construction site should be purchased by the company from the safety supervision station.

3. The safety officer of the project management department should hang signs based on the specific conditions of the construction site or different production, living, and office spaces. Safety signs should be drawn according to divisions and sub-items (basic, main body, subsidiary), and the safety sign floor plan should be signed by the project manager, signed by the drawer, and dated, and the "Safety Sign Registration Form" should be filled out.

IV. Setup location

1. During line construction, set up a warning line around the hole excavated by the earthwork, set up warning signboards, hang warning lights at night, and set up construction points on the road When working, warning signs should be set up at a certain distance from the construction site in accordance with traffic regulations or personnel should be sent to conduct traffic diversion.

2. During site construction, safety warning signs should be set up at the entrance to the construction site, scaffolding, entrances and exits, stairwells, hole entrances, bridge entrances, tunnel entrances, and edges of foundation pits.

3. Set up obvious safety warning signs in dangerous locations such as high-voltage lines, high-voltage poles, high-voltage equipment, high-risk areas for lightning strikes, storage areas for explosives and hazardous gases and liquids.

4. Other places where safety signs should be installed.

5. Setting Principles

1. Emergency exits, evacuation passages, and stairwells in different locations in public places with dense on-site personnel must be set accordingly? Safe passage? sign. In places far away from the safe passage, the indicator arrow of the "Safe passage" sign must point in the direction leading to the emergency exit.

2. When constructing on roads or other places where construction workers often pass by, appropriate safety warning signs should be set up in accordance with relevant traffic regulations. Edge openings in buildings should be in accordance with the "Safety Technology for Working at Heights" Specification" requires setting.

3. The layout of the construction site should be reasonable. Uniform safety warning signs should be hung according to the locations marked on the construction safety floor plan. Uniform safety warnings should be added to places with greater risk factors on the construction site. logo.

4. The standard settings for temporary electricity use should comply with the relevant specifications for electricity use.

5. The markings of all machinery should comply with the regulations on specialized machinery.

6. Safety warning signs must comply with the requirements of national standards GB2849-1996 "Safety Signs", GB16179-1996 "Guidelines for the Use of Safety Signs", and GB2893-2001 "Safety Colors".

VI. Management regulations

1. When safety signs need to be moved or dismantled due to construction needs or after the completion of the project, the safety officer of the project management department will be responsible for organizing the movement of the safety signs. , or after recycling, return it to the security department of the grassroots unit for unified custody.

2. No one may move or dismantle safety signs without permission from the safety officer of the project management department.

3. The safety officer of the project management department should promptly repair and replace deformed or damaged safety signs.

If any damage is found, it should be reported to the company. After approval by the company, the same signboard will be issued to the project department, and the full-time safety officer of the project department will hang it as required.

4. The safety officer of the project management department is responsible for the use, maintenance and management of safety signs.

5. The company's security department will supervise and inspect the use of safety signs by the project management department every quarter and the security department of grassroots units every month, and fill out the "Inspection Record". If it is found that the project department does not follow the company's unified requirements for posting, a warning or corresponding financial penalty will be given according to the severity of the case.

Management regulations on the use of safety signs 3

1. Safety color safety signs stipulate the colors, geometric figures and graphic symbols that convey safety information. The purpose of using safety colors and safety signs is to People can quickly discover or identify safety signs and reminders, draw people's attention to unsafe factors, and prevent accidents.

2. Safety colors and contrasting colors should comply with the color representation specified in GB2893-2008:

1. Safety colors are specified as red, blue, yellow and green. Red means: prohibition, stop; blue means: instructions, regulations that must be followed; yellow means: warning, attention; green means reminder, safe status, passage.

2. The contrasting colors are black and white. Black is used for the text, graphic symbols and geometric shapes of warning signs, and white is used as the background color of safety red, blue and green. It can also be used for the text and graphic symbols of safety signs.

3. Red and white, yellow and black spaced stripes are two eye-catching means. The red and white spaced stripes mean that crossing is forbidden, and the yellow and black spaced stripes mean a warning of danger.

3. Safety signs and supplementary signs should comply with the regulations of GB2894-1996.

1. Safety signs are composed of safety colors, geometric figures and graphic symbols to express specific safety information. They are divided into four categories: prohibition signs, warning signs, instruction signs, and prompt signs.

2. The supplementary sign is a text description of the safety sign, which must be used at the same time as the safety sign.

3. Prohibition signs are signs that prohibit or stop people from doing certain behaviors. There are 16 of them.

4. Warning signs are signs that draw people’s attention to possible dangers. There are 23 of them.

5. Instruction signs are signs that must be followed. There are 8 of them.

6. Prompt signs are signs indicating the target direction. Generally, there are 2 prompt signs and 7 fire prompt signs.

IV. Use of on-site safety signs, safety colors and slogans

1. The general plane and layout of on-site safety signs should be drawn according to the construction layout.

2. The construction site must be set up according to the drawn safety color-coded floor plan and comply with the national standard safety signs.

3. On-site safety color safety signs should be used correctly and produced in compliance with national standards.

4. The main access to and from the construction site should be set up with a gate that meets the requirements of the company.

The door should be equipped with corporate logos and slogans, be equipped with gatekeepers, and have a gatekeeper management system.

5. The gate of the construction site should be equipped with the main effect of the construction site, a general plan of the construction site, a general plan of safety signs on the construction site, and construction bulletin boards, health notices, fire prevention notices, and safety disciplines. Brand, ten safety technical measures brand, fire equipment brand, safety sign board, three pictures and seven cards.

6. Slogans on safe production, civilized construction, ensuring quality, and shortening the construction period should be hung in the construction site according to the general layout. Double increase festival slogans and safety signs.

7. The office should have various rules and regulations and a safety production responsibility system.

8. Other living facilities should be equipped with management systems and sanitation systems that are consistent with their uses, divide responsibility areas, and determine responsible persons.

9. Material management labels should comply with the company’s implementation of the ISI9000 standard.

10. Safety technical operating procedures signs must be hung next to production equipment and tools.

5. Safety colors and sign management

1. Establish safety signs and files, and register all signs, slogans, and signs.

2. Set up a special warehouse with dedicated personnel to manage and establish a registration system. Establish an inspection, maintenance, and repair system. Safety signs must be inspected during each safety inspection. If there is color contamination, damage, discoloration, fading, or does not meet national standards, they will be cleaned, maintained, repaired, or replaced in a timely manner.